Would have been awesome to hear it, kinda missed opportunity. Great video though thank you for this !

My 2020 Frontier (same engine) has an open breather as well. Pick up a WIX inline fuel filter from Oreilly's. Pops right in. You can cut the other barb off for more air flow.

K&N includes complete picture directions. Have installed on three Frontiers and they are easy. Easy to service the filter also.

Seems like the factory intake fits the exact same way. Therefore, the truck already has a cold air intake. I just dropped in a K&N replacement panel filter and saved 400 bucks. If what you pay for this intake is worth what you get out of it (additional power/torque). Let me know and I'll buy one tomorrow.

You installed it all wrong. The big O-ring gasket goes on the snorkel tube, outside of the filter and is secured to the filter box.

that loose hose is a breather; it is all good

Per the online instructions that oval piece goes on the other side of the fender, you’ll have to,pull the wheel and fender liner to install.

Dude. The instructions are online

The instructions are online. There's nothing wrong with the design you installed it all wrong. This is why I never buy used cars you never know what the hell the last person did

I can hear my 22 Frontier engine. I can also hear and feel the constant shifts at 70mph.. 🤣🤣

I'm pretty sure that extra large rubber gasket is for the other side of the outer fender. I hear it's kinda of a bitch to get into place and not really that big of a deal if it doesn't go in.

The same everything as the 2016 except fot the extra gromet the kit they send is not 100% compatible I had to modify several modules in order to make it fit, also they did not include the valve cover to intake hose in the kit like theyr said was there but wasn't ... Easiest way I had it installed before I realized that hose was not included, I hill billied it by using a garden hose piece for a temproarary use and it worked ... got a replacement hose and had to tie wrap it to another spot and it cleared very well

I would send it back, the OEM it's designed to work the best

Did you figure out if there was supposed to be anything on the end of the breather hose for front diff? Or does it just angle down without anything on it?

I got the same thing that stupid rubber gasket I fought with it but whenever I had it place it just completely let loose and fell inside. So I superglued it in place and was able to fit the manifold in but I’m not sure about it. Gives a louder sound that I think sounds cool. But I wish it was longer seems like I may have gotten a shorter manifold compared to yours.

I like my frontier, glad I didn’t have to buy a gladiator!

Could you have seal it up better on the air filter if you wouldn’t have put the filter on tight first?

I guess we will take your word on the sound

And the instructions on the website

Can we get revs in and out of truck and drive by. Whole point was to hear it 😂😂

We need nissan gtr nismo engine in it and nismo aftermarket parts in it and 5 inches lift kit

The front end on the s model looks better.You should replace your panted lower grille with a black one from the s.80 bucks,well worth it.

Is it common to mod a leased vehicle? Dont you have to remove it all when the lease is up?

In your other video showing what the intake sounds like at wot did u have any non OEM exhaust on or was that just the intake at the type?

last thing I want is to know what is going on with my ride.. no way.. hell no.. if i dont hear anything then nothing is wrong right? Right?

My 2020 has the same engine and it is noisy

1:10 Me as fuck. I hate that it’s so quiet but at the same time idk Id keep all the parts incase one day I wanted to make it quiet again. But I had a 2002 chevy that I had new dual flowmaster exhaust on. Nice and loud. And then I flipped it and have this quiet dorito cannon that I’m trying to figure out how to mod out.

Looks good.

How much was the new intake?

You should have sprayed some carbon-cleaner down into the engine while you had the mass-sensor off.

Did you trade your diesel gladiator,I had a diesel gladiator very similar to your and we traded it for 2022 frontier

I can relate my man

And it sounds like ……???

Ben better of dropping a k& N filter in, that thing will get hot and reduce power!

After your lease is up do you think you would be interested in letting a viewer win the Z1 intake kit for their 2022 frontier?

Who the hell leases a truck

There are many better choices for cold air intake.

A very painful watch.

All that and didn't even gain even a half of a horsepower. People and their myths thinking adding a cold air intake to gas aspirated engines is going to give them horsepower.

Quiet trucks are unamerican

yuk🤮

I would have taken that back off and sent that thing back.It doesn't fit right and it won't make one bit of difference with performance.It looks like all that thing does is change the shape of your air filter

Why do you sound like a prepubescent teenager? 😅

I should have went to comments first