Z4 E85 Window Regulator cable replacement

Рет қаралды 166,336

10 жыл бұрын

Пікірлер: 40

@jontrackerjack 3 жыл бұрын

Very good video thanks. The fade up from the bottom was GRRRRRrrrrrr. People in the west read from top to bottom and no fade would be perfect, however still a great video thanks, much appreciated.

@griffingottwald6711 4 жыл бұрын

This was awesome! Helped me a bunch! Cheers!

@mlmbjs7435 3 жыл бұрын

Great video! I was able to replace mine today. Thanks a lot

@KillTheFear 9 жыл бұрын

Great video. I am doing this to the passenger side of my 2003 Z4 E85 tomorrow. Glad I now know what to expect.

@cesarjr14 8 жыл бұрын

+KillTheFear How did yours go?

@KillTheFear 8 жыл бұрын

cesarjr14 Perfect. Didn't have a single issue. This video is very clear on instruction and I got it done fast. Later I did it for a friend and was able to do it in about 35 minutes.

@MrMactoshi 7 жыл бұрын

KillTheFear where did you buy the cable from? Looking to do it on my z4 as well

@cesarjr14 7 жыл бұрын

ivan I bought mine on ebay...but honestly I dont think i would do it again....one of the little metals part broke and not by my being excessive in force it just did...headache...next time im being the whole kit..more money but saves you time.

@jack4553 5 жыл бұрын

Had to buy a 10mm metal drill bit I'm still working on it 7 hours later.

@rotorblade9508 4 жыл бұрын

This is how I got the airbag light at the paint shop.

@WeRunBC 6 жыл бұрын

Awesome video im doing my jetta using this

@scottrussellmusic5258 3 жыл бұрын

Great video got myself a replacement cable kit and had it all working again within two hours. I used a rivet gun tho instead of nuts and bolts.

@jasonjlodge 4 жыл бұрын

Really helpful video, did my passenger side window on the Z4 yesterday, ended up with the air bag warning light on though after I had to reconnect battery to get window clamp bolt aligned with hole. Any ideas how to reset? OBD2 not doing the trick.

@ZoranNinkovic 5 жыл бұрын

thanx ,great vid

@elflamo7612 9 жыл бұрын

Nice diy writeup, thx!

@dcastor 8 жыл бұрын

i disagree...fussed around with trying to get the new cable on the reel next to the motor for hours...too tight, too loose...it was like trying to put ten springs in a box and close the lid. in the end i ended up breaking some of the cable strands making the whole thing unusable.

@RoachCatJr 2 жыл бұрын

@@dcastor that sounds like thats ur fault lmao

@beezer8686 7 жыл бұрын

I've done two cars using this video - both successful. Wish he narrated instead of those fade in and out banners. Cables are $15-20 on ebay.

@richardprettyman1285 7 жыл бұрын

The fading is making me want to find another video but I really need to fix my window

@williamarden5441 6 жыл бұрын

A whole regulator fir my vehicle us 30

@zueslover7706 5 жыл бұрын

@@richardprettyman1285 its got so annoying now with shit camera work,blink and yool miss it ,narration disappearing from the bottom up wtf that i cant concentrate on it so just came straight down to the comments to see if i was the only one that has been left more frustrated . . fuck i dont even have a Z3 , i have an m3 -awh i am going to bed zzzzz

@ptodb2495 8 жыл бұрын

just about to attempt this...

@benjaminchmielecki2269 4 жыл бұрын

where did you buy that black part? mine broke so i dont know how to replace it

@powerbytony2002 9 жыл бұрын

where can i order just the cable for a gmc?

@joeorlando94 2 жыл бұрын

Do you know why the cable got tangled up in the first place? I’d hate to replace the cable and then have the same issue again.

@mystreba 6 жыл бұрын

I gave it a "like", but super frustrating video - next time skip the black fade.

@YZFMANIAC08 10 ай бұрын

Cool rebuild but the entire windowmechanism including new cables and rollers is 130 euro, seems a bit easier/foolproof than just renewing the cables

@gianpiero20 2 жыл бұрын

Has anyone experienced any issues with the bolts securing the pulley casing becoming loose due to vibration? Did you use nyloc nuts?

@stevengutierrez9831 7 жыл бұрын

where exactly can one purchase the cable? I can't seem to find it anywhere

@terryraffini4543 4 жыл бұрын

Steven Gutierrez @ Amazon

@marcelgalarneau8730 6 жыл бұрын

thnx for this video did mine yeterday passenger side work fine and save $$$$

@JIA725 6 жыл бұрын

I am using this video to replace the driver side regulator of my 03 Z4. The problem I am having is that I cannot remove the back part of the assembly due to the threaded bolt looking end facing towards the ground that seats on a raiser slotted platform of the door. One can see it when watching this video at the 6:18 time mark (pause the video) after he lays the assembly down on the ground and this threaded end is on the upper right side if the of the back assembly almost pointing to the 1 o'clock direction. It seems that it is held down by a nut but I could not find a way to check it out even to insert a toll. Anybody has some feedback? Thanks.

@benjaminchmielecki2269 4 жыл бұрын

there are black covers undernearth it that you remove

@salarrabati8947 Жыл бұрын

Good job And very bad experience

@nasnas9336 8 жыл бұрын

not worth it, you can buy a new regulator much cheer than having to go through this, plus you are running a higher chance of this cable going losing again..