So true. I know because I have gotten a letter in the mail complaining about it. haha

Bam Austian Hahahaha

@@BamAustian is it really that loud

Neighbours 😂 Whole colony knows he is home 😂

@@BamAustian LMAOO

bingo!! im hoping to get this color on a new 2020 after check finally arrives!

@@outdoors-gs9td so how is it?

@@-privat-9061 seconding this ahah, have had my MT07 with full Akra and love the sound of it. Would like to switch brands to try a bit of everything and this new "Limited" Z900 Plus Performance SE really caught my eye. Although it equates to 15.000$ where I live... which is double the price of my 07, but let's see:)

DOOOOO IT!!!!!

Seems like it is very dull, even with a slip on. Have to do full system to get it to come alive.

Jcizzle210 there are nearly no full systems of a company. Do you know a good one ? And this is not just a slip on his collector is not stock.

To make it sound good just do Arrow Headers and SC1 Exhaust like the guy in this video has.

@@Ren3gade Just remove the cat and install a slip on

It's about as dull as a ZX10R. Because it has the same motor.

Definitely trying. I don't have the equipment yet. Trying to find some :)

GTN RIDER it is mounted on the Arrow header on the left side under rear shock area. Just can’t see it :)

Juan, No screws out of place. You will get a different bolt for the header bracket that is next to the sensor and rear suspension. It comes with the headers though. But this set up is truly bolt on. No drilling, no modifications, no bending. It all lined up perfectly for me with no issues :). Hope this helps.

Derrick Roy here you go my man. Exhaust = www.motovationusa.com/s1-exhaust-by-sc-project-K25-T41T.html Headers = www.motovationusa.com/stainless-steel-racing-headers-by-arrow-71661MI.html

6Tdegrees I have not... sounds like you have?? Is it sticking bad?

Cumminskiid23 hey there. I did do a tune and got it dyno’d. I went with Rapid bike EVO auto tuner

@@BamAustian what does the dyno do?

How is yours set up?

Dj Fouce header is needed to accomplish this sound, or a lot of fellow Z mates are just having the cat cut out and running a straight pipe, which gives you this sound but not paying as much. :)

Rider Read the mirrors are CRG - arrows. They do not hit the tank. You do not HAVE to get a tune, but it is recommended to utilize the new exhaust set up and run better air/fuel mixture. I went with Rabid bike auto tune :)

Thierry Papillon hey there. At the time the bike was pretty new to the market. Arrow and Akra were the only headers out. Arrow would mate with the SC slip on with out any issue. But now a year later SC has headers lol

Bam Austian okay thanks a lot for your fast reply, what would you recommend then, a full SC system or slip on with separate SC headers or arrow headers anyway etc.? I really have no idea which way to go

Motron hey there. I ran the bike with headers with stock slip on for about a month until the SC project cake in. I would say about 20 minutes to put it on, and that was me taking my time. It matched and mounted perfectly for me.

Okey, thanks man, I appreciate your fast answering! Have a good day!

Peace Maker it comes with the SC-Project slip on...... believe they have to include it for it to be street legal :)

I actually have the pleasure of dealing with a local shop in Texas called motivationUSA. However you can browse their site as well at motovationUSA.com if you ever have questions give them a ring. Great group over there.

juan daniel arteaga lavanga I actually do not know. I will try to find a DB meter :)

Nitin Ramaniah definitely not mine! Ha. I’m in Texas

nostrum no, this bike is way too strong for a new rider.

Yes the DB removed in this video is original to the new S1 set up. Thanks a ton!

Bam Austian I'm in doubt between the z800e and the new z900 with 95 hp I love them both and that sound. which would you recommend me?

The Z900 makes 125 hp and like 112-115 at the wheel stock not to mention it's lighter than the Z800

BayAreatech, Actually it's not on the bike for this Video. So this is stock tune. Will do a vid soon with the Evo tuner installed and such

Hey I want the same full exhaust but is it necessary the tune de z900 because the shop people says thats not necessary

Mehmet Köse If you do a full Exhaust, Yes it is recommended to get a tune in order to get the full benefits from going full exhaust.

Agreed. New video on its way up with running down a road behind my neighborhood. The bike is running great with the new tuner installed.

This is the Arrow racing header.

JC DISIL I believe all the SC slip ons made for the z900 will fit the arrow header. The arrow aligned to the stock location so should not have an issue.

Thanks for the response. Hopefully I’m getting my 2018 Z900 this week. Definitely getting a sc project exhaust after watching your video. Ride safe

Evan, the S1 slip on by SC project has 1 level of baffle. the inner ring is part of the design of the exhaust. So it gives the look there are multiple. Im not sure what other videos you have seen, but to my knowledge this is the only design on the S1 made for Z900. I would note that in Asia and some European markets there are common "knock off's" (replica's) that are not true SC project. That could also be one of reasons you see a difference.

Bam Austian i dunno man , maybe you’re is not a real ones , and yes in asian there’s a lot of fake product in here currently on sell , but if i have to say the ones i looked is very real

Bam Austian but still thanks man for the information though 👍

I am lucky that the official SC Project supplier is in my city, so I went and picked it up personally. They run SC Project USA, etc, so pretty confident that this is the real deal. lol

anytime!

HuLk it is a full system. But the headers are arrow racing. At the time last year SC had not released headers.

Bam Austian thx bro

1 More Questions so I understood that u took arrow headers and scproject end silencer, ahh.. what did u payed for that exhaust system ?^^

HuLk I want to say it was approx $1,200 usd

Commenting here as I am also interested. I believe you just need headers and exhaust, as you said. Bam said in other comments it all fit perfectly. Looks like Arrow headers are $772, and SC1 Exhaust is $638. Looking at $1,410 USD (that isnt including install). EDIT: My other question is, does installing this full system require a power commander tune?

Thanks Jcizzle for the info. I ended up ordering the slip-on only for now and will see (hear) how it sounds. If it seems too tame, I'll go ahead and splurge on the racing headers. I talked to my friend who runs a Kawasaki dealership near me and he said a full system will need a power commander. I think an ECU kit flash could also accomplish the same if not better results than a power commander when doing a full system. Exhaust link: www.motovationusa.com/s1-exhaust-by-sc-project-K25-T41T.html

Thanks for the update man. Most of the time in videos I see riders with just slip ons and it sounds great. For some reason the K900 in most videos with just a slip on seems way too tame still. Let me know how it goes with just the slip on! Would be nice to only have to throw the slip on in and be good to go. Things start getting pricey with headers + tune! :P

I got the slip-on installed. It helped a little bit and I can hear the potential, but the cat has to go. It is still way too quiet. I ordered the Arrow racing headers and a power commander. Should have the full system installed in the next week or so. I might try to put up a video on my channel of the sound with the slip-on now with the cat intact. I'll keep you and everyone updated.

No one cares

@@sebster6031 Thanks for caring enough about my comment to actually take the time to comment about my comment. Hmmm...sounds like you're incorrect because you 'cared'...obviously, you are, according to your comment, you are the 'no one' that 'cares'. Seems that English is not your first language...it's not mine either. Perhaps what you meant to say was, "No one cares about your comment, but I do". There, I fixed it for you. You're welcome!

Hi Juan, No modification needed. the arrow headers follow factory location. So the SC project slip on is simple to install on OEM or after market headers. :) At least for akra and arrow headers :)

Some bikes its different but with the Z and new emissions standards the Cat and "bread box" on stock headers really really muffles the sound a lot. There are a few people that have just added just the slip on and the tone certainly changes, but not really all that much louder. The headers really open up the sound change for this bike. I do have another vid of just the headers with stock slip on that will give you an idea. Also do keep in mind SC project is one of the louder exhaust. So there are other slip ons that can be used with headers that can be a bit less loud than my set up.

That's good info. Cheers.

sgabriel I am also curious

I also have Akra slip on (w/o db killer) + Black Widow headers. The sound is extremely loud, so I do not recommend it for daily use. :/