Zach brought us his truck for some upgrades featuring ARP625s, @DynomiteDieselTV injectors and CP3 and left with a monster!
Пікірлер: 119
@Blackneck19942 жыл бұрын
Nothing sounds better than a manual Cummins with the lord’s manifold running through the gears!!
@chaseferguson541211 ай бұрын
So a 2g manifold makes them scream like that?
@logan_gfitty64 ай бұрын
yessirrr@@chaseferguson5412
@mikestrucks2 жыл бұрын
Awesome work as usual Josh ! Seeing this truck makes me missing my G56 truck...
@toddsculley27102 жыл бұрын
Another one for the books sounds like it running great. Good job once again
@ports7872 жыл бұрын
That truck is what dreams are made off. I love the build!
@lyndonhamby74322 жыл бұрын
Clean unit. Good job 👍
@chevyon37s2 жыл бұрын
Something about feeling 100% of your engine through a manual transmission.
@joshuaquilliam28872 жыл бұрын
I want to drive a manual 3rd gen, I have an 05 with a Firepunk Comp in it and it's great but still not 100% power to the ground all the time. I think my next truck in a few months will be a manual. Truck sounded good in the video, I forgot what that 5.9 sounded like, I went 6.7 swap a year ago.
@200130769 Жыл бұрын
@@joshuaquilliam2887 why would you do a 6.7 swap when the 5.9 can do everything the 6.7 can do but more reliable and cheaper?
@joshuaquilliam2887 Жыл бұрын
@@200130769 LOL Not a snowballs chance in hell a 5.9 can do what this 6.7 does. The only thing you need in a 6.7 is rods. Wagler street fighters FTMFW. If you have never driven a 6.7 swapped 3rd gen you are missing out. I had a 64/67 he351 on my 05 when it was a 5.9 and i always had to work the overdrive off on even mild hills. My 6.7 with a 68mm spools like the stock charger did on a 5.9. My 5.9 needed rings so I went bigger A 5.9 does great with compounds, but I rather have the cubes. My truck is a toy not a work truck.
@200130769 Жыл бұрын
@Joshua Quilliam you forgot valve springs and head studs. It's the same with the 5.9. Head studs, valve springs, and pushrods is all both need unless you're passing 1000 hp. The 5.9 can tune just as much as a 6.7 can. So I'm not seeing where the 6.7 is miles ahead. Wouldn't you want something actually fast as a toy?
@11164kloc Жыл бұрын
💯💯💯💪
@Balakay94352 жыл бұрын
Hell Yeah Brother 🇺🇸🦅
@colinlawrence21862 жыл бұрын
Great job Josh i think your customer will be well pleased 👍 Take care stay safe and God bless you always and 🙋♂️ 🇬🇧
@jamesmarlar6962 жыл бұрын
Nice and the hat is nice good work glad you are keeping busy
@janamaro58942 жыл бұрын
12:40 that starter sounds like a 2006 5.9 Cummins with the G56 Manual.
@Dirtyol12valve2 жыл бұрын
It literally is a 5.9. He put a cp3 off of a 6.7 on it.
@janamaro58942 жыл бұрын
@@Dirtyol12valve It is a 5.9 Cummins.
@_WELDR_ Жыл бұрын
Awesome job 👍🏼 I’m wanting to do this all my self this summer , if I do it myself I can save on the install bill 👍🏼👍🏼 can’t wait till I get home !!
@martin12345123452 жыл бұрын
Wish I was closer to you guys. Would pay you big bucks to work on my 06.
@73cjproject2 жыл бұрын
That is a really nice set up, inspires me for my 05 nv5600 truck. Glad to see you still rocking the Wirefire Gang shirts. How much total time did that install take? You make it all look simple. Having the right tools and knowledge make it all work out nicely.
@horsetorquesdiesel2 жыл бұрын
Maybe 5-6 hours
@4wdiesels2 жыл бұрын
It was funny as hell watching your hands get progressively dirtier & dirtier during the time lapse teardown at the beginning 🤣. Those darn dirty diesel engines! Nothing stays clean.
@om603denis2 жыл бұрын
Sounds like Vtec kicks in.
@Motorsports_RxRacingchannel4 ай бұрын
Sounds so good!
@code10garage942 жыл бұрын
You make it look like a walk in the park!!…Awesome content!!👍🏼👍🏼…Aloha🤙🏽
@overheadcam322 жыл бұрын
Love your videos. I'm in the middle of doing studs, ddp 40 hp injectors and new rockers due to mine being galled. How is the best way to get a torque wrench on that rear injector tube nut? Thanks. Crows foot ain't cutting it. The rear are easy to do
@overheadcam322 жыл бұрын
I'm running some efi live from anarchy. Will it need a retune for the 50 hp injectors?
@turbomonza15612 жыл бұрын
@@overheadcam32 I’ve always done new tunning for fuel changes some time you can get away with a turbo for a bit but fueling is a lot different
@williecauthorne5312 жыл бұрын
Great job 👏
@andrewwadel929 ай бұрын
Is that a completely stock g56 transmission? Just curious because i have an 06 5.9 with a dual disc clutch , DDP 90's , CP3K , EFI , fass 150, and compound 62/65 over a 75/96 snails and wonder how bad I can rip on my transmission before I need to worry about breaking stuff
@drake_24v_hawkins2 жыл бұрын
Exhuast setup? That thing sounds wicked!!
@drake_24v_hawkins2 жыл бұрын
@Deejo5.9 clearly. I didint ask what the turbo setup is, you can clearly tell. And see in the video 2nd gen swap kit.. I want to know whats AFTER it.. 🙄
@drake_24v_hawkins2 жыл бұрын
@Deejo5.9 no shit sherlock..
@zachparsons25982 жыл бұрын
It's actually just a 4inch axle dump. Nothing fancy. 2nd gen swap is 100% where that sound comes from.
@drake_24v_hawkins2 жыл бұрын
@@zachparsons2598 thanks man! Badass truck! I've got a 2006 g56 truck! 100% overs, 10mm with a Tater 67/67.
@zachparsons25982 жыл бұрын
@@drake_24v_hawkins thanks buddy. what kind of power are you making with that setup and that tater charger?
@bcbloc022 жыл бұрын
Sounds good!
@patrickatmoonlightdieselan22072 жыл бұрын
😎 those hats lookin fresh
@iron_and_torq2 жыл бұрын
Keep up the good work brother
@bdjm85952 жыл бұрын
NICE !!!!
@Thepuggleparty29 күн бұрын
Dude that’s one of the sickest trucks I’ve ever seen, I’m mega jealous, can I have it? Haha 😁😂
@pedal2metal8142 жыл бұрын
Great video.
@ppvfd121 Жыл бұрын
Great work Josh! I have learned a ton from your channel. Hoping to 2nd gen swap my 6.7 g56 truck in the near future, what would be a good turbo to have a little fun but still be able to tow? Open to doing injectors eventually but rather stay on stock sticks for a bit.
@Gixzer04 Жыл бұрын
Speedo def didn’t look like a 900hp truck. Def expected to see that speedo spike.
@stevenmiller33302 жыл бұрын
Looks like it spools that 72 good. I was thinking it would be a slug with the 5.9.
@joshuaquilliam2887 Жыл бұрын
Perfect way to spend 10k, prefer dual cp3s myself but I bet the owner has a perma grin!
@totalperformancediesel83284 ай бұрын
built one in '10 950rwhp tried a girdle but the customer kept breaking the g56
@claytonporter91 Жыл бұрын
Great work Josh much love from Cedar City hope we see you again keep up the great videos
@lyleconway67952 жыл бұрын
Man I’d love to have u work on my truck! When are u gunna send me injectors to Nova Scotia haha
@horsetorquesdiesel2 жыл бұрын
Shoot I wish
@decentgarage2 жыл бұрын
What are your thoughts on retorque after the headstuds install? Hot retorque? Cold retorque? No retorque?
@horsetorquesdiesel2 жыл бұрын
On a used gasket no need
@decentgarage2 жыл бұрын
@@horsetorquesdiesel perfect! That's what I was thinking but just wanted to confirm.
@nicolasramirez65672 жыл бұрын
Do you recommend to do cam upgrade ..after some 600Hp???
@turbomonza15612 жыл бұрын
Josh starting to tow a lot / hot shot with my 6 ho. Would you say stay vgt or go with one of these new ball bearing s300 . Was thinking maybe a s364.5/68 .83 divided with divided up pipes ? Or if vgt like kc stage 1.5-2
@bcbloc022 жыл бұрын
If you tow a lot always twins, they can't be beat for towing.
@turbomonza15612 жыл бұрын
@@bcbloc02 true but twins is pretty hard on a 6 blow
@horsetorquesdiesel2 жыл бұрын
Vgt hands down
@turbomonza15612 жыл бұрын
@@horsetorquesdiesel thanks Josh. So a stage 1.5 (525whp limit ) stage 2 ( 600whp limit ) engine is built stage 2 cam ported heads Odwag s2r exhaust manifolds banks intercooler 5” exhaust
@Colorblindkid19972 жыл бұрын
Would W.O.T ever put out a autocal? Would be super interested in tuning for my 06 g56 truck
@horsetorquesdiesel2 жыл бұрын
We sell them
@earlprice72002 жыл бұрын
Quick question...if I have an Exergy 10mm CP3 ... Could I add the stock CP3 and run dual set up ...???
@horsetorquesdiesel2 жыл бұрын
Yes
@wheyez12 жыл бұрын
Hey Josh, I thought you did the studs in the torque pattern. Do you recommend installing the airdog with the bottom outside plate? My 06 runs better with a full tank of fuel and I’m thinking the airdog setup drawing up from the bottom is restricting my flow. Any opinion?
@horsetorquesdiesel2 жыл бұрын
I always run sumps, and I run it on the outside rail. I torque them to the final in sequence but replace them from back to front
@ChannelZeroOne2 жыл бұрын
Sounds good man. Who is doing the tune. My is smokey asf even on tune one with 45%
@horsetorquesdiesel2 жыл бұрын
Someone who wishes to remain nameless
@BadGoat922 жыл бұрын
Josh, quick question…currently looking at buying a 5.9 g56 truck. Long term goal would be 800ish hp. Truck will be 60/40 toy/daily driver…will tow some, but not everyday. Do g56’s hold up to abuse…or are they kinda fragile like a zf6? or is an auto truck probably the better move. Hard decision, especially after hearing how nice the truck in this video sounds lol
@horsetorquesdiesel2 жыл бұрын
800 is doable with a good clutch! The g56 caps around 850-900 without serious upgrades
@BadGoat922 жыл бұрын
@@horsetorquesdiesel thank you! Wow quick response too. Appreciate it man!
@barnbuiltbeaters Жыл бұрын
Interesting you say fragile like a ZF6 I have always heard they are very stout and some people upgrade to them since in their stock form they are better than a built NV or G56? I am building a 12V and want to be +800hp too with a manual but not sure what trans to go with. Was thinking G56 for simplicity but worried it wouldn't hold up. Other option was ZF6 as I have heard great things about how they drive and how they handle power. I have no first hand experience with either though
@danespooner80822 жыл бұрын
What brand are the mirrors on that truck?
@bakerrules9992 жыл бұрын
What tuning do you have man I need to clear mine up
@eatrucking950 Жыл бұрын
I have one fully stock 2006 2500 manual truck how much will it cost me for all that
@brentmcmahon8188 Жыл бұрын
I want the 2 Gen swap on my 05 manual only up grade Fleece twin gear motor pumps where are you at in what state Utah 150,grand mileage so what does the Fleece second Gen swap will cost .with valve set to stock might be more you can sell me.
@robertramirez50432 жыл бұрын
@horsetorques diesel do you need to replace head gasket when you do headstuds?
@horsetorquesdiesel2 жыл бұрын
Not on a MLS gasket
@williamlazarovitch4034 Жыл бұрын
Is the g56 built? If it is stock what kind of power can it handle before it lets go?
@horsetorquesdiesel Жыл бұрын
Stock g56 and a south bend dual disc
@natesuttenfield2124 Жыл бұрын
How much do you charge to do injectors on a 5.9 common rail?
@horsetorquesdiesel Жыл бұрын
Call the shop 276-608-3298
@toddhaig8902 жыл бұрын
with 900hp did he have to do the bottom end just curious mines almost same setup?
@zachparsons25982 жыл бұрын
its still a stock bottom end.
@specializ202 жыл бұрын
How much hp you running through your g56??? How hard have you been able to abuse it?
@zachparsons25982 жыл бұрын
I've beat on it pretty hard and it seems to be holding it but I don't expect it to hold forever.
@specializ202 жыл бұрын
@@zachparsons2598 what no are you at?
@zachparsons25982 жыл бұрын
@@specializ20 with the fuel turned down right now i would imagine it being around 900. It's not been on a dyno yet to get an exact number. That's just going off the tunes they put in it.
@specializ202 жыл бұрын
@@zachparsons2598 you are beating ur g56 with ~ 900hp no fucks given??? And it's hold up??? Why am I such a pussy
@foresttflannigan63762 жыл бұрын
@@zachparsons2598 Hope you dont mind me asking, what clutch you running? about to run a similar setup, and need to pick a clutch.
@witcher712 жыл бұрын
Won't take long for that G56 if he turns it up and starts banging on it.
@zachparsons25982 жыл бұрын
We have plans to swap a 48 in it when it does grenade.
@horsetorquesdiesel2 жыл бұрын
Heck ya
@danespooner8082 Жыл бұрын
@@zachparsons2598 how much power was it making during this video and what all was done to the trans?
@codymarshall57532 жыл бұрын
Is that Josh's tuning can I have my 06 dodge two?
@horsetorquesdiesel2 жыл бұрын
I do not sell tuning boss
@hunterhutchins21702 жыл бұрын
Can you give me a idea on what a job like that cost
@JTFSIX2 жыл бұрын
25k....go ahead and paypal me...Lead time is 2 years - Stay Safe
@horsetorquesdiesel2 жыл бұрын
For what ?
@hunterhutchins21702 жыл бұрын
@@horsetorquesdiesel to have injectors,headstuds,and cp3 installed
@dylanheise96552 жыл бұрын
Tuning a manual trans?
@horsetorquesdiesel2 жыл бұрын
I mis spoke
@Cody-ew5zw2 жыл бұрын
I was wondering that one too.
@moose5.9 Жыл бұрын
Where yall located?
@horsetorquesdiesel Жыл бұрын
Abingdon VA
@ictdpowerstroke45912 жыл бұрын
Yeah ,,not so sure about the 900hp thing
@jimmungai19382 жыл бұрын
As much as that work you do I would get a topside creeper if I was you guys I could help protect from you getting elbows scraped and stuff like that you know and damage to the truck you’re working on this is six in a row jim From Kennerdell Pennsylvania
@horsetorquesdiesel2 жыл бұрын
We have one I hate using it. We never damage a customers truck, we have padding
@MK-ng5fp2 жыл бұрын
final u respect G56, dont fall in love lolol
@horsetorquesdiesel2 жыл бұрын
I didn’t, they are nice if you like going slow
@MK-ng5fp2 жыл бұрын
@@horsetorquesdiesel hahah i think your friend needs to show you hows its done
@TheProchargedmopar2 жыл бұрын
👍💪
@AshleyY-iz2jy Жыл бұрын
G56 won't last long. I'm on my 2nd g56 truck making 1200hp.
@horsetorquesdiesel Жыл бұрын
they never do!
@hermanR022 жыл бұрын
My GF said your eyes look like light skin black person eyes