Zafira Tourer front brake pad and disc change.

No video

Zafira Tourer front brake pad and disc change.

Рет қаралды 16,386

Stevo's Car Stuff.

Күн бұрын

Пікірлер: 13

@paulsill1 2 ай бұрын

Thanks for this. Just did the first pad change myself.

@MalakSe4ko79 2 жыл бұрын

Very helpful video,thanks😊

@andrejmednansky1029 5 жыл бұрын

just one notice - when you push brake piston inside its better to open bleeder - so old and dirty brakefluid can flow outside and will not destroy ABS unit. ABS is very sensitive even to smallest impurities - dirt particles.

@stevoscarstuff.1745 5 жыл бұрын

Thanks for that, but personally it's something I don't recommend as you can easily introduce air to the system. There's nowhere for dirt to get into the closed system anyway, but each to their own ways.

@sutt16v 4 жыл бұрын

Kudos one handed 😉😀

@TheGazza636 4 жыл бұрын

Should put bit copper slip when remounting your new discs plus a wee bit between the wheel and disc.

@stevoscarstuff.1745 2 жыл бұрын

I wouldn't usually put anything between the disc and hub. Increases the chance of the disc no running true.

@TheGazza636 2 жыл бұрын

@@stevoscarstuff.1745 personal choice I guess .but when it needs to come apart again mine won't be any problem.

@alexisaustria1203 5 жыл бұрын

would you be able to put a video on how to remove the scuttle panel please? I got a 15 plate tourer and in need to access the dpf sensor. However, I cannot remove my scuffle. Thanks.

@user-rz7sg4ie9v 11 ай бұрын

Great video. What brake pads did you use?

@stevoscarstuff.1745 11 ай бұрын

Cheers, if I remember right they were Mintex discs and pads

@NokturnaL86 4 жыл бұрын

Are the rear brakes much different? I got front and rear brake pads to do and your video has helped alot what torque for the 2 bolts on caliper? Just put thread lock on make it tight?

@stevoscarstuff.1745 4 жыл бұрын

Rear pistons need to be wound back, not pushed so slightly different. I don't torque the caliper bolts, just thread lock and tighten