Leader kit for AK: review, how to install

Рет қаралды 42,932

2 жыл бұрын

New product for AK and rifles based on it: Leader kit! Our longest kit (up to the front sight) with a slot for an electronic block, which is integrated into rail. In this big review will answer following questions:
• What does the kit include?
• What are weight and size characteristics?
• How to install on rifle?
• What are the features of Leader hook?
• What can be installed in the front part for electronic block, how will Perst-4 look there, what is Perst Leader?
Product is already available! You may order here:
Leader kit: en.zenitco.ru/catalog/weapon-...
Leader insert rail: en.zenitco.ru/catalog/weapon-...
How to install B-33: • B-33 dust cover review...
Disclaimer: this video demonstrates only lighting devices and rails. Shooting is conducted on training targets by professionals. The materiel is educational (for military, security professionals, shooting sports enthusiasts). Do not repeat that yourself! All work on firearms should be carried out by licenced individuals. We will not be held liable for any injury to yourself or damage to your firearms resulting from attempting shown anything in our videos. We are NOT a gun shop and DO NOT sell firearms.
#zenitco #ak #ak74m

Пікірлер: 197

@garenosborn 2 жыл бұрын

Anastasia is the embodiment of grace and elegance.

@Cesko_Plny_Fialovejch_Zmrdu 2 жыл бұрын

What is the last time you walked outside your house?

@K0Y0I_sis 2 жыл бұрын

Touch grass.

@RonJeremy514 2 жыл бұрын

Horny stray dog in sight!

@Esper320 2 ай бұрын

@@Cesko_Plny_Fialovejch_Zmrduvirgin detected

@Howjadoo22 2 жыл бұрын

"And for our friends with strange measurement system..." Ouch

@weasle2904 2 жыл бұрын

Which is super ironic since the Russians used to have their own measurement system completely different than the rest of the world. In fact the Mosin Nagant is not sighted in meters, it's sighted for "Arshins" which is approximately 0.7 meters.

@spicn00 2 жыл бұрын

@@weasle2904 that would be the early Russian Empire Mosins as far as I know. Soviet made Mosins used in WW2 are in meters.

@weasle2904 2 жыл бұрын

@@spicn00 you've replied to me on two different videos lol

@RedboRF 2 жыл бұрын

shes right tho

@RedboRF 2 жыл бұрын

@@weasle2904 what are you talking about? those measurments are long gone, like.. 100 years +

@javiermaximo6709 2 жыл бұрын

I will continue to insist that the ZENITCO developments are stupendous and optimize the AK's performance too much. Also note that Anastasia is very cute and it is a pleasure to see her in the videos. Greetings from Mexico.

@niktheson1113 2 жыл бұрын

From the B-30, to the Sport, to the Leader. Zenitco, congratulations on continuing to innovate, you truly deserve it. From the land with the funny measurement system! 🇺🇸

@getit9066 Жыл бұрын

Your video production is matchless. Outstanding start to finish, every one of them.

@billb9806 2 жыл бұрын

I freaking love what you guys have done for AKs! I am a huge fan! Remodeling my first AK now! I like modern weapon systems.

@Zengsalva 2 жыл бұрын

Literally what i was waiting for, thanks Zenitco, and thanks Anastasia

@fugu_facesr.7081 2 жыл бұрын

Anastasia, thank you again for a great video on that handguard system!

@gunterstraus606 2 жыл бұрын

This is a very cool system for fully covering the AK barrel.

@stillenacht8518 2 жыл бұрын

Oh my. I don't know which is more impressive, the Leader rail or Anastasia in that gorgeous dress. 🖤 My heart is happy today.

@benjaminoblak528 2 жыл бұрын

Nice harness! Also this is perfect for the AK103!

@xXs3renityXx 2 жыл бұрын

Amazing products

@lucasskywheeler9818 2 жыл бұрын

I am In love with how this AK looks. i want to get this exact setup with the perst 4 leader and everything it is hard to find all these things in stock. You should put together some packages that will include everything. stock, leader kit, perst 4 leader, and maybe the grip too.. I would be first in line to buy one. another great video by the way.

@TheNerfherder1000 2 жыл бұрын

looks easier to put together than to take apart. That's what I like about Zenitco. Its made to be an extension of the rifle, not just an accessory.

@dimgl19 2 жыл бұрын

But is taking it apart as hard as importing the stuff? I ask for a german friend. 🤣🤣

@TheNerfherder1000 2 жыл бұрын

@@dimgl19 importing is MUCH harder sadly.

@brickphone2570 2 жыл бұрын

great vid as always

@julianajohansson2713 2 жыл бұрын

Brand new masterpiece!

@innawoods.larper 2 жыл бұрын

Looks really good!

@HaleFire7 2 жыл бұрын

That's a slick system

@riverchaser2090 2 жыл бұрын

You are the baddest fox walkin this earth

@TangleWireEnjoyer 2 жыл бұрын

The sport-4 is pretty nice on the full size. But when you need 2 more inches of basis

@meyrrr007 2 жыл бұрын

I think its time to get an AK and Saiga and start upgrading... Zentico has my vote.

@cryowarrior1 2 жыл бұрын

I was saving up for the sport kit 1................ now I want this.....

@Zengsalva 2 жыл бұрын

Anastasia joking about using inches instead of cm👌

@KaitenKenbu 2 жыл бұрын

Integrated electronic block is my love language.

@nichtgefunden404 2 жыл бұрын

I found the video scrolling through KZfaq and the way you are holding it in the thumbnail preview picture made me think “that’s one strange looking guitar.”

@ZenitcoinEnglish 2 жыл бұрын

It’s my kind of balalaika 🙂

@gussbuss4739 2 жыл бұрын

hypnotizing right here.

@jensenthegreen6780 2 жыл бұрын

Long AK's... Nice

@dimgl19 2 жыл бұрын

"For our friends with strange measurement system..." love it ^^ I hope NATO/Europe and Russia keep their chill and there won't be any embargos or worse, so I can buy a nice Saiga-MK 102 in .223 (finally found an importer for it in Germany) and some Zenitco goodies for it (hope I can buy directly from you guys). Warm greetings from Germany!

@platinmetallic3797 7 ай бұрын

What importer did you find. I am also looking for one in Germany.

@rik4369 7 ай бұрын

Great product! The Presenter is excellent, knows her product and YES EASY ON THE EYES. Focus Randy!!!!!! Considering putting this on my Klalishnov 103 that I picked up this summer. Anyone have any expirence with this product? I plan to use my AK as an Farm Utlity Rifle ( anything out to 300 yards). Love to hear if they're worth the money. I have tried Midwest Industry side Mount , doesn't fit. I did pickup a No- Named brand from a friend but need more rail for Red Dot & possible Magnifier. So was it worth the cost to anyone? Great Work Anastasia and Company. I just saw this video and appreciate your Presentation Style! Semper Fi

@m.7n6 2 жыл бұрын

I ordered sport 1 Zenitco kit from Russian thunder for my Romanian wasr10 AKM because I didn't want the full length AKM handguard, I'm only adding a nightstick twm 854xl with a pressure switch, and Zenitco bazis handstop, and the AKM 14x1lh 7.62 muzzle comp dtk1 14x1lh and adding a bars kusa optic.

@AlphaChimpEnergy 2 жыл бұрын

I want to see you do some nasty drills with a PKM!

@subixbarbarasson6052 2 жыл бұрын

+1 On the bondage gear. ❤️

@b00bzzzzz 2 жыл бұрын

for our friends with strange measurement system 🤣🤣🤣 died there. also love these vids.

@user-xs8xb5wq2o 2 жыл бұрын

Super!🔥🦾

@zardadkhan2555 2 жыл бұрын

Decent character smart AK matching hahaha 😍 Peshawar

@surfingtothestars 2 жыл бұрын

Love the outfit 🔥

@TheTupacSoldier7 2 жыл бұрын

a true valkyria

@rodiculous9464 2 жыл бұрын

I am curious about barrel harmonics and POI shift with the bayonet lug attachment, because there are two reasons for free floating, one is for harmonics but the other is to prevent the barrel from flexing when resting on surfaces. for example if you were to apply pressure like she demonstrated it would cause not only the handguard to flex but the barrel to flex along with it. When that happens your POI shifts as well. I suppose that accomplishes the goal of preventing the laser device from coming out of alignment with the POI, but now it's coming out of alignment with your primary optic by essentially mating the barrel with the handguard. Maybe they made it so strong that it eliminates all flex entirely, but I am skeptical. And what of different heat expansion rates? For example the barrel may expand or shrink due to heat imparting a level of flex into the handguard, or perhaps vice versa. And also the barrel tends to freely "whip" when firing due to barrel harmonics. Perhaps they have thought of all these factors, but it makes me a bit wary.

@boobe92 2 жыл бұрын

Hammer and sickle are tools every AK user should posses.

@martykelley2001 Жыл бұрын

THANK YOU ANASTASIA YOU DO A EXCELLENT JOB IN EXPLAINING TALK SLOW AND CLEARLY THANK YOU FROM USA NEW HAMPSHIRE

@Gabriel-fx5bo 2 жыл бұрын

tbc this is asmr

@stevo5459 2 жыл бұрын

Great video yet again! Does the Leader kit fit a milled Bulgarian AK (The SAM7SF in particular).

@ZenitcoinEnglish 2 жыл бұрын

Unfortunately, our rails are not compatible with milled receivers

@jeremy8715 2 жыл бұрын

Is the top part between the front sight and gas port be sold as a separate component from the gas tube rail component?

@apoxrox 2 жыл бұрын

Please make a rail system with dust cover for the Saiga 12. Pretty please?!

@matthewrezuke8130 2 жыл бұрын

I want to put this on my psa ak 103!

@surfingtothestars 2 жыл бұрын

don't put Zenitco on junk AK's

@matthewrezuke8130 2 жыл бұрын

@@surfingtothestars psa ak 103 is just fine guy

@dartshinigami 4 ай бұрын

It should always fit tight, if not, change it...

@mkultra6664 2 жыл бұрын

I love your clothing style Anastasia, and you are most beautiful. ❤️

@qinshou04 7 ай бұрын

I would like to know if the hand stopper must be installed in the designated position and if it can be used normally without losing its zero?😊

@markbrown4597 Жыл бұрын

Anastasia, I would deeply appreciate an answer to this question. Would an L3Harris ATPIAL (peq-15) laser aiming module fit and function in the electronic mounting position of the leader kit?

@battlecruiserrepulse5406 2 жыл бұрын

Any word on how the current situation is affecting shipping to the US? I would like to get a Leader kit for my AK.

@justaguy6623 2 жыл бұрын

Could you tell me which handguard will fit a Zastava m90 5.56?

@maxwood5157 2 жыл бұрын

Nyet comrade, rifle is fine

@jaycupples4362 2 жыл бұрын

Wonder if this will fit my slr107f ?

@xsv161 2 жыл бұрын

If my AK doesn't have a front bayonet lug on the front sight, is it ok to use the bayonet lug under the gas block to install the hook at 13:30?

@yesnomaybeso5755 Жыл бұрын

Will this leader kit work with “Century Arms BFT47?” It has a barrel length of 16.25”(412.75mm)

@rilianriggs4620 2 жыл бұрын

Hello. My B33, B30 and B31 came with hex screws when I purchased them. After using blue loctite on them, when I removed them to have my rifle refinished the hex screws became damaged. Can I order a new set of screws from you for slotted screwdrivers? Thank you

@ZenitcoinEnglish 2 жыл бұрын

Yes, you need screws with size M5x9. Here are they on our website: en.zenitco.ru/catalog/accessories-and-spare-parts/spare-parts/m5kh9-screw/ But such screws are very likely to be found in household stores as well. Standard M5x10 screw will fit too

@hamzairshad9889 2 жыл бұрын

The leader kit won’t fit on my Chinese variant of the AK just FYI. The bayonet mount is in a different location and the leader kit doesn’t account for that. Sucks because I was really excited to get this kit :(

@sususu1044 2 жыл бұрын

AK比AR漂亮太多了

@joseph4333 Жыл бұрын

Which kit do you recommend for PSA AK 104

@Supercereal4 2 жыл бұрын

Awesome! Does the perst-3 also fit in the leader electronics slot?

@cryowarrior1 2 жыл бұрын

I was wondering about that too I think that's what the space was meant for, but I honestly have no clue.

@ZenitcoinEnglish 2 жыл бұрын

No it does not fit in the top. The zeroing unit hits the front sight. It fits on the bottom really good, we will make a video about it. It fits on B-2M there, but next week we are releasing B-2 Leader which will be even better there

@sagabal1116 2 жыл бұрын

What type of AK series to change zenit attachment?? Can ak47 original fit on it?? Love your explanation.

@ZenitcoinEnglish 2 жыл бұрын

It is compatible with AKs beginning with year of manufacture 1968. Will not fit original ak47

@CircaSriYak 2 жыл бұрын

This could genuinely be ASMR with the proper mic. BTW, what model AK is that? 103?

@ZenitcoinEnglish 2 жыл бұрын

74M. Why the 7.62 mag? Well, we like exotic stuff

@jeremy8715 2 жыл бұрын

Blue or red locktight for screws near trunnion??

@fabiuscuervo7758 2 жыл бұрын

Que bonita

@Zero-jx2hf Жыл бұрын

😮😮😮 This trick 😮😮😮 9:44

@serenitygrizzly5913 8 ай бұрын

The sport 4 says that it is compatible with 308 AK's but i dont see it saying the same with the leader kit, is it compatible with 308 as long as it is standard barrel length? Greatly appreciate any feedback, thanks

@TheVinceZampella 2 жыл бұрын

Will the leader kit support a Perst 2 in the low profile mount position? Looks a little small based on the video

@ZenitcoinEnglish 2 жыл бұрын

Perst 2 won’t fit there. Perst leader is planned to have same number of features: flashlight, ir illuminator, ir laser, visible laser, but in ergonomic shape for this position. Perst-2 is better to be placed on the bottom or on side

@TienDuong1997 2 жыл бұрын

Can I put another front hand grip on leader kit ?

@nikolaimoskvin8016 2 жыл бұрын

Are any new products being made for the svd platform? It is impossible to find the B-40 and -41 nowadays. Would love to see a video about it.

@ZenitcoinEnglish 2 жыл бұрын

They were discontinued. Currently no plans for SVD

@nikolaimoskvin8016 2 жыл бұрын

@@ZenitcoinEnglish Too bad, would love to get a hold of a pair.

@_Kommissar_ Ай бұрын

Hey Zenitco, can the B-10U keep the Barrel Cleaning Rod?

@ZenitcoinEnglish Ай бұрын

Yes

@sarge11756 2 жыл бұрын

Does it come in plum?

@jiriframberg1050 2 жыл бұрын

Is the handstoper necessary for connecting the two lower hanguards?

@ZenitcoinEnglish 2 жыл бұрын

Yes

@nicklaskornmaaler3264 2 жыл бұрын

don't use a hammerhead as a "spacer" hitting two hammerheads together can result in one of the splintering and injuring the user

@keno-aj1530 2 жыл бұрын

Anastasia what zenitco accessories are compatible with the KALASHNIKOV USA KR-103? Im asking because I want all the furniture to be zenitco

@johnleyva4619 Жыл бұрын

All of it will fit, they also don’t get along with kusa since they stole their name lol

@NotCheezzy 2 жыл бұрын

Will a perst 3 fit in the front cut out where you guys had perst 4?

@ZenitcoinEnglish 2 жыл бұрын

@vergel5013 2 жыл бұрын

This kit, will it work on palmettostatearmory ak47/74?

@JA-nt9em 2 жыл бұрын

Does Zenitco make accessories for Yugo pattern AK's?

@ZenitcoinEnglish 2 жыл бұрын

Currently no

@doublepiedavid8908 2 жыл бұрын

Does it get in the way of storing the cleaning rod?

@ZenitcoinEnglish 2 жыл бұрын

It is not compatible with cleaning rod

@gocpod 2 жыл бұрын

Can PErst-3 gen3 be placed on top forward position like this IR module?

@ZenitcoinEnglish 2 жыл бұрын

No, it hits the front sight with laser zeroing unit. It looks good on the bottom and on side. Will make a video about how our different devices fit Leader

@gocpod 2 жыл бұрын

@@ZenitcoinEnglish wow, i almost hit buy button on these 2. Please do so, good video with interchangeabilty.

@user-qz2sw7pq8y 2 жыл бұрын

where can i find out if a handguard still allows me to install gp 25 grenade launcher ?

@ZenitcoinEnglish 2 жыл бұрын

That are B-10M, B-10U and B-10L handguards

@raulhidrogo7815 2 жыл бұрын

Will y’all come out with hand guards for the zastava m85 and m92?

@ZenitcoinEnglish 2 жыл бұрын

We want to

@raulhidrogo7815 2 жыл бұрын

Great 👍🏼

@matthewrezuke8130 2 жыл бұрын

@@ZenitcoinEnglish We need zenitco furniture that will fit these rifles with yugo style!

@richardb8157 2 жыл бұрын

@@ZenitcoinEnglish Serbian rails and stocks would be great but I understand Yugoslavian specification is very different from Russian

@bobkin611 Жыл бұрын

"our friends with strange measurement systems" Hahahaha thank you for at least showing it :)

@osuna3525 2 жыл бұрын

17:43 😁

@khurshidali4683 2 жыл бұрын

I wonder if it fits the Vepr-12?

@ZenitcoinEnglish 2 жыл бұрын

No. This is for AK pattern. Vepr-12 has RPK based receiver, we made Sport-6 kit for it. Note, that Sport-6 is compatible with Vepr rifles with a Picatinny rail on the bottom, we know that some export editions don’t have it

@joseph4333 2 жыл бұрын

Is that compatible with zastava m70 16.5 long rifle?

@ZenitcoinEnglish 2 жыл бұрын

No, our rails are not compatible with Zastava

@valliantthepigeon7640 2 жыл бұрын

Can i put this in a saiga mk103(ak103)???

@ZenitcoinEnglish 2 жыл бұрын

Yes

@ShahAznable 2 жыл бұрын

This work with RPK74 type receiver?

@ZenitcoinEnglish 2 жыл бұрын

No. For RPK we have Sport-5 and Sport-5U kits

@specialist_from_1980 2 жыл бұрын

С бакелитовым магазом вообще не смотрится, а вот ремешки норм)

@tama-sama 2 жыл бұрын

Does your muzzle breaks work with .308?

@serenitygrizzly5913 8 ай бұрын

does this leader kit including the b-33 dust cover work with 308's

@kk771009 2 жыл бұрын

how is the fitment on airsoft brands like cyma E&l and lct ?

@ZenitcoinEnglish 2 жыл бұрын

We do not make rails for airsoft

@kk771009 2 жыл бұрын

@@ZenitcoinEnglish I know the products you guys make are for real steel , the brands i listed earlier are real close to the real steel versions but there are some looser tolerances. do your products come with any spacers so we could bridge those gaps? . and get the propper fitment ?

@Deltaforce5ify 2 жыл бұрын

Ciao Anastasia ,io abito in Italia come posso avere alcuni prodotti che a me mi interessa Привет, Анастасия, я живу в Италии, так как могу иметь некоторые продукты, которые меня интересуют. Спасибо

@CandyManV4 2 жыл бұрын

Can we just buy the front part of the leader?

@ZenitcoinEnglish 2 жыл бұрын

DL Leader rail might be sold separately as well

@MicheleMarafioti 2 жыл бұрын

Could KLESCH-2 been installed near Leader hook?

@ZenitcoinEnglish 2 жыл бұрын

Yes. We tried to put B-2M there and installed Klesch-2 on it. It fits!

@MicheleMarafioti 2 жыл бұрын

@@ZenitcoinEnglish Thank you. ✌️

@MicheleMarafioti 2 жыл бұрын

@@ZenitcoinEnglish can I avoid to install Leader hand stop? I would like to install another hand grip

@ZenitcoinEnglish 2 жыл бұрын

We did all the tests with Leader hand stop, that’s why we can guarantee good performance only with this hand stopper installed. We did not make tests without one. Need to make them

@xurkipoo 2 жыл бұрын

“Strange measurement system”

@A.T.TomICBomBr87 10 ай бұрын

I really really want one. But with current world events……one can only dream.😔

@goldboy987 2 жыл бұрын

I need one that fit M90 and M70 which one should I use?

@surfingtothestars 2 жыл бұрын

I don't think Zenitco fits any of those

@ReapingRose115 2 жыл бұрын

@@surfingtothestars Not without some major modification at least.

@XDWX 2 жыл бұрын

They only fit Russian variants.

@aleksandartokin6914 2 жыл бұрын

Is Anastasia ok? She sounds tired

@bryuchiha1617 2 жыл бұрын

🔥🔥😎🔥🔥😎😎🔥🔥🔥

@LIKEDBUTTONPluto 2 жыл бұрын

Can I get this stuff in the us?

@ZenitcoinEnglish 2 жыл бұрын

Yes. We ship to US

@Schild4823 2 жыл бұрын

Will anything but Perst line fit leader kits? I would like something with just visible laser/flashlight for leader kit. I personally don't need the extra capabilities/cost of the IR functions in the current Perst line. Thank you and great work!

@ZenitcoinEnglish 2 жыл бұрын

Yes. In this case better to install it in the bottom front position. You just need to create an extra Picatinny rail there. We have rails that create extra Picatinny on Basis. “B-2 Leader” rail will be a good addition - it creates a Picatinny rail in this exact place (on Leader kit in front part next to bayonet lug). B-2M also fits there, B-2L is too long for front section. “B-2 Leader” is perfect.