Can the new ZT please the fans and compete with the current crop of high end TI framelocks? Use my affiliate link to DLT it's a big help to the channel dlt.link/2utYZWt
Пікірлер: 41
@leealtmansr.38112 жыл бұрын
Just got the BLKTS model.... Love IT! Good video, thank you.
@bigdavidcannon44 жыл бұрын
I love my ZT 0308 , I even purchased Micarta scales for it. Thanks for the nice review. 😃
@ATherapeuticEdge4 жыл бұрын
I added the black polished micarta to mine, and completely changed my feelings on the knife. I absolutely love it now.
@TheScottyp14 жыл бұрын
how much were the scales?
@bigdavidcannon44 жыл бұрын
I purchased from USA made blades. $59.00 for the scale of if you purchase the knife with scale already installed it only cost $305.00. Thanks
@ViaMatt47 Жыл бұрын
Mine just arrived. This is an amazing knife. This reviewer is on point.
@mikechallis18014 жыл бұрын
I’ve owned 2 0300’s and loved them, the 308 lost me at the tan g10 but love the blade. Great video
@harleygreen13653 жыл бұрын
Easy to change the color with Rit dye
@OldmanSnake3 жыл бұрын
Love the 308. Only flipper with equal non assisted action is my ZT 393 which is also awesome. Action is buttery smooth. Though will scare folks when opening. Lol
@newcoyote4 жыл бұрын
Well at least ZT calls the newer trending models what they are. Boutique knives. I have them and like them. They are incredibly nice pieces. The older ZTs have a very different feel, that's for sure. Nothing wrong with either.
@firstlast25143 жыл бұрын
I've always been a "hard use" folder kinda guy. I mean I carry a 4max in my rotation, all my friends, and, my brother are like that too.bit wasn't till later on in life that I figured out that's not everyone's thing lol. I get more edc friendly knives, and of course have some. But my favorite go to knives are always the bruisers. Glad to see the 0308 in ZTs line up. I do love the Hinderer ZTs too. The other stuff doesn't speak to me at all. Maybe the RJ martin colab. The sinkevich ones... Not so much. But to each there own.
@Baruch-Hashem3 жыл бұрын
The 308 needs the deep carry pocket clip like the 0562 family. An Aftermarket deep carry that does goes behind the scale would be a massive improvement. Hope somebody does a deep carry clip that wraps over the back and uses a shorter last spacer to fit.
@sheltermonkey60654 жыл бұрын
I like ZT, but that price is just nuts. You can get the new Presidio for under $110, or an AD10 for $140 last time I looked. My definition of a hard work knife is a ten dollar Mora.
@terencemarkiewicz39082 жыл бұрын
0920 is the best zero tolerance yet I've handled and I've had the 0560 and 0562 ti but I think I'm gonna try the 0308
@gumbihilt13333 жыл бұрын
How in the world do you make an AD10 carryable? Carry my 4Max Scout all the time, but the AD10? With that clip? Help me out here. I have one that sits at home because I can't figure out how to make it work in pocket.
@watches.4 жыл бұрын
My favorite argument: $50 more can land you a used hinderer. 😬 Ouch-sooo true. Then there’s a very different conversation Great video as usual, Kevin-thanks!
@gregwalker42363 жыл бұрын
this is what a real zt is supposed to be like--exactly right in my opinion. not all zt's are this way--they're good but don't quite invoke the joy--more like a little heavier kershaw (and to be fair priced more like an upscale kershaw). i resisted the urge for the 308 because it absolutely at the edge of the envelope price wise. if you want the joy tho, you gotta pay that piper. my advice to people on the fence: buy ONLY knives that get you what you want, which means far fewer knives.
@AGC828 Жыл бұрын
the relief cut "thinness". It is noticeably thin and thinner than the liner on show-side. On my 560 it's the same thickness. Is making the relief cut "wall" this thin actually a bad thing? Is it a point of possible failure?? No one's mentioned encountering it that I know of.... And if it were why would KAI/ZT do this? Should they not know better?? "knife building 101"? Cost....just recently in Canada they dropped the cost of the Cyote Tan version by $40.00 CAD....the black scale G10 with blk/grey tiger stripping is $490.00... Have you done a videeo comparing it to the Reate Torrent? Or your "Best 3 haard-use knives"?
@Kevinclearysharpstuff Жыл бұрын
If you have watched the demko testing videos from Cold Steel the ZT 0300 failed at the relief cut
@thomaslanders62444 жыл бұрын
I think the best ZT’s are in the middle. I don’t like the assisted 0301, 0350. They are too heavy along with 0560, weird 0220 (?). Then, I can’t stand the 0450. It’s too small for me and I’ve handled 5-6 in store and could pretty easily push lock bar over with my finger. I’m picky and don’t like flippers either but the two that were good enough to keep are the 0801Ti (don’t like the old 0801) and 0393. I had the 0562 which is good but the other two are better especially the 0801Ti.
@damienhughes72284 жыл бұрын
I love my 0308. Great blade, action, ergos, and I actually like the looks of it honestly. They could’ve tweaked them a little but overall I like the look. I don’t love the pocket clip but it keeps the knife in your pocket. Not everyone does but I do. Can’t wait to see what their next release brings to the table.
@PapaWheelie14 жыл бұрын
The 0920 was solid and didn’t look like a flat loaf of bread
@thomasraymond23143 жыл бұрын
920 is one of their best
@Templetons3 жыл бұрын
0560,0562 blow it’s doors. The 308 has an incredible blade and action, but that’s it.
@markw73034 жыл бұрын
Its a cs of a zt really and its great but its heavy and if you can deal with that its amazing better then most we and reates action on average
@richardhansen16284 жыл бұрын
Get out of here - Reate has the best action, and that is a fact.
@markw73034 жыл бұрын
@@richardhansen1628 handle enough reates an wes and they go from good to great like any other premium brand reate is better then we and zt on average. But this zt is better then a good but not perfect reate No real disparagement to reate but there not perfect especially for the Money they ask makeing zt lookk like a value brand at times and WE can suck and egg for what they charge. Most zts dont hold but up this does easily . Im in the high low 30s of zts owned and this actually made me smile. (4or5 ) wes 3or4 reates by comparison
@istvantoth74312 жыл бұрын
I like the coyote tan too. Never understood the bxtching about it...
@mccrimmon574ify4 жыл бұрын
What do use it on looks like no wear
@Kevinclearysharpstuff4 жыл бұрын
wood cardboard plastic normally I dont so much food prep but I do with this because its capable of it what do you cut that shows all kidns of wear in a few months?
@karlizen49904 жыл бұрын
No it's not. And plus, my Manix 2 XL shits on this. Also, this knife is $300 street price. What are you joking? What does ZT think it is? Scott Cook?
@halcooper60594 жыл бұрын
I want to like this knife but the cost is way too high. Nice blade shape and steel. It should have bronze washers.
@stephenbarone40534 жыл бұрын
I miss the 0550
@MrJohnny3333 жыл бұрын
I wished the 0308 would have thumb studs
@istvantoth74313 жыл бұрын
I agree
@rihsatqvert4561 Жыл бұрын
I love … my amalgam.
@TheScottyp14 жыл бұрын
does it have bearings on ti?
@CASTRO45ACP4 жыл бұрын
No, one side is a stainless steel liner behind the g10, the other side has a steel washer on the titanium. Honestly though I've had a 0920 for about three years and that has steel bearings on titanium and it hasn't worn a deep groove, I think it may be a little overblown.
@TheScottyp14 жыл бұрын
@@CASTRO45ACP yea i just got that one too. i guess we will see. im glad they put some steel there tho. cheaper to replace washers than the whole ti scales. the only thing that worryies me is overtightening the pivot cause bearing depressions. a chinese folder did this to me. dicoria sailing s35vn. so im assuming with any hard transverse pressure you can get bearing spots in the ti also. id wish they would used thick tracked washes like some of chinese. but zt are still some of my fav knives. this may be my next knife. Edit: i love me some les george desins. have the 0909 and 0920. 0920 actually has great action. in that respect ti seems to roll great on bearings. they are steel tho. not sure how ot would go with ceramic on ti.
@pharaonsk4 жыл бұрын
Front and back scales are ugly AF, i dont see ZT in that knife