Zero Turn Blades Won't Engage: Why

No video

Zero Turn Blades Won't Engage: Why

Рет қаралды 93,497

Күн бұрын

amzn.to/3Fchjr6 Test Light for troubleshooting electrical
amzn.to/3W9uFLS Digital Multimeter
amzn.to/3FRWJOF Dielectrical Grease
amzn.to/3iSyDtQ Head lamp for working
amzn.to/3PxdSjT Wire connectors Kit
amzn.to/3uHJUjg PTO Switch Replacement
amzn.to/3YfEYzS Fuse Set
In this video, we troubleshoot the electrical system to try to figure out why the blades are not engaging on a Yazoo/Kees Mid Max zero turn tractor.
Help support Doublewide6 Repairs LLC by sponsoring his Patreon Account
/ doublewide6
Doublewide6 Repairs LLC has a Master’s Degree in industrial technology with a specialization in Manufacturing, due to factors beyond the control of Doublewide6 Repairs LLC and anyone featured in his videos, I cannot guarantee against improper use or unauthorized modifications of this information. Doublewide6 Repairs LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of Doublewide6’ Repairs LLC's videos. Use this information at your own risk. Doublewide6 Repairs LLC recommends safe practices when working on equipment, power tools, chemicals, electronics, electrical systems, vehicles, and or with tools seen or implied in this video. Due to factors beyond the control of Doublewide6 Repairs LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Doublewide6 Repairs LLC.

Пікірлер: 57

@doublewide6 Жыл бұрын

@tinamarieb49 Жыл бұрын

My mower was left out in weather for 5 years. Did all the typical tune up stuff and got it running but the blades won't engage at all. You've given me a place to start and I ordered the test light. Thank you!

@doublewide6 10 ай бұрын

you get it sorted out?

@mikespain8655 Жыл бұрын

Yahoo Kees went out of business several years ago. Worked on a 60" YK zero turn that had several issues this summer. Electrical troubleshooting gives lots of people problems. It is my weakness but have improved a lot. Good fix again. Sell it in the spring!

@doublewide6 10 ай бұрын

Yazoo are good mowers. In my opinion same quality as exmark. Its a little harder to find parts though.

@Big_Johns Жыл бұрын

Nice job Bob, I have a friend that brings his Yazoo/Kees zero turn to me for service, its a good strong mower. Keep the videos coming brother, thanks. 👍

@chrisssmallengines7163 Жыл бұрын

I find if you keep your cool and think a little , usually you can figure it out . Great video nice fix .

@CraigArndt Жыл бұрын

Nice way to diagnose it. Using a test light or a battery pack like you and some gator clamps, has helped me sort through some electrical issues. Nice job!

@doublewide6 10 ай бұрын

How you doing Craig hope all is well. Bob

@knighthawk86855 Жыл бұрын

Na no worries, a fuse, don't feel bad, their loss is your gain, not your fault, not like you knew what was wrong, didn't tell them, then bought it, you didn't have a clue the guy didn't know what he was doing, that's how I got my snapper pro 50, and my time master, I had bought the timemaster for 50 bucks, fixed it all up, put in key start, and now it's awesome, 3 months later the kid called me, and asked for it back, cause he sold me the wrong one, I told him I fixed it up completely, and installed key start, if he wanted it back it would cost him 1500.00, loke I said their loss is your gain, learn how to diagnose properly, and you won't loose a perfect machine because of a fuse, great fix and great video.

@henrymurawskibigdogrepair Жыл бұрын

Well done Bob it don’t take much to have problems but we hunt and find them good job

@doublewide6 10 ай бұрын

Thanks Hank! Hope all is well.

@wrfarms9741 Жыл бұрын

Thank you Bob! The continuity test on the pto switch that you showed was a HUGE help.

@EllisMowersandmore Жыл бұрын

It's always good when it's just a fuse. Nice job Bob, and all the testing, inspecting and cleaning gives peace of mind in verifying that it's in fact only a fuse. Nice video!

@BrucesShop Жыл бұрын

Nice work Bob. That fuse was in hard to see through. A meter is the way to verify.

@doublewide6 10 ай бұрын

Hi Bruce, Hope you are doing well. Get ready for winter it's coming.... and so are the snowblowers

@aleblanc3547 Жыл бұрын

👍 trust but verify. 😊

@Turningwrenches85 Жыл бұрын

Nice troubleshooting bob on this Yazoo finding out why that pto would not engage well done sir

@doublewide6 10 ай бұрын

Thanks buddy. I'm not the best at electrical but I'm getting better with each one I see.

@waynestefinashen239 Жыл бұрын

Merry Christmas and Happy New Year to you and your family from Lori, Jake and myself at Eliminator Performance here in Canada.

@Smalltechguy Жыл бұрын

Good investigating...Lawn Mower detective AKA Taryl fixes all

@OldF1000 Жыл бұрын

So now you are left thinking what caused the fuse to blow in the first place

@miklomorales4768 Жыл бұрын

A shot somewhere right ? A wire frayed wire somewhere shorting?

@philliphall5198 Жыл бұрын

That’s the biggest problem, it’s going to blow again from drowning to much power like bad clutch or wire problems or connectors

@FactsMattersUSA 10 ай бұрын

ALWAYS check fuses first. Second, Voltage Regulator. Great job

@petefroud5308 Жыл бұрын

Nice work Bob

@lykaojalao2733 9 ай бұрын

Very educational Thank you

@maryhibbard9199 10 ай бұрын

Thank you! Very helpful!! 👍🏻👍🏻👍🏻

@melissahart9452 4 ай бұрын

Very helpful video!

@robertmailhos8159 Жыл бұрын

It's a crying thing is that Yazoo mower company is no longer in business

@doublewide6 10 ай бұрын

they are solid machine Robert!

@viktorkalashnikov2871 Жыл бұрын

Thank you very much for your video brother save me 140 dll. the problem was a broken cable

@david5476 Жыл бұрын

Voltmeter check ohms across pto leads can tell you if it has burnt windings causing low resistance and high voltage draw that can drain battery. 2-4 ohms is normal.

@doublewide6 10 ай бұрын

Good tip. I'm still learning, but I did determine PTO was working properly.

@waynestefinashen239 Жыл бұрын

A simple fuse now that was lucky just wonder how it blew, maybe by boost starting with a vehicle battery and the vehicle engine running causing too many amps and thus the blown fuse? Nice inspection and clean up of the wiring while checking thought.

@doublewide6 10 ай бұрын

I think i may have blown the fuse when troubleshooting possibly?

@queenstownkid Жыл бұрын

great job

@harveystephens6115 Жыл бұрын

Nice machine

@sherrischneider2794 Жыл бұрын

Always check the fuses first, always.

@doublewide6 10 ай бұрын

Good tip, I think I popped the fuse because I did have power orignally.

@rich-mp6dm Жыл бұрын

I saw your video a few weeks ago on undercoating your vehicle with bar oil from 5 years ago. What's your opinion on it? Would you do it again?

@doublewide6 10 ай бұрын

It works great I do it about every 2 years. It is a pain and messy though.

@shaffersmallengineshop5957 Жыл бұрын

very nice diagnostic technique. YZ was a Husky brand that they killed.

@doublewide6 10 ай бұрын

yes, it's a shame.

@Komfobia 3 ай бұрын

I have a Toro Reelmaster 5610. The problem with it is that it raises the cutting decks sometimes and sometimes it won't lower. And sometimes it is completely dead on the lever. Does anyone know what I should be looking for?