昭和4~5年頃に作られたブリッグス&ストラットンヱンヂン。 ボロボロで部品不足からの復活をお楽しみくださいませ! This time I repaired the Briggs and Stratton engine! ※この動画はフィクションです!
Пікірлер: 335
@randynovick79726 жыл бұрын
This was pleasing to watch. I especially like the pairing with the reciprocating pump. It was an excellent demonstration choice. Thank you for sharing this project.
@garakutadou6 жыл бұрын
Thank you!
@bluecore3225 жыл бұрын
.
@kenkenrd15 жыл бұрын
約90年前のエンジンとは思えない保存状態と工業製品としての美しさに見入ってしまいました。
@garakutadou5 жыл бұрын
ありがとうございます。 本当に美しい機械ですよね~
@scottnelson48596 жыл бұрын
My son and I truly enjoy watching your repair and restoration videos. We find them very informative and relaxing. Thank you for your excellent channel!
I just love to see these old engines restored and given a new lease of life. And you make such a good job of them. Thank you for sharing.
@ronitsingh856 жыл бұрын
thats a beautiful engine, bullet proof design and very reliable, I noticed the care with which he dismantled the engine, cleaned it and assembled it all together. Kept that patina and did not clean the engine on the outside
@billy1231745 жыл бұрын
I salute you sir on the wonderful job you made of resurrecting that old engine may it run for another 70 years.
@garakutadou5 жыл бұрын
Thank you!
@frenchcreekvalley5 жыл бұрын
Thank you. I had one of that model Briggs when 9 years old (71 years ago). I like the method you used to make the new muffler.
@garakutadou5 жыл бұрын
Thank you!
@user-gi3pd4xs3t5 жыл бұрын
…
@yufu82626 жыл бұрын
エンジンのかけ方面白いですね〜 技術力の高さに見入ってしまいました笑
@garakutadou6 жыл бұрын
ありがとうございます! 普通ヒモを巻き付けて引っ張るんですが、これは凝った設計ですね。
@johndengler45955 жыл бұрын
From Pennsylvania, USA, thank you for a wonderful video. I really enjoyed seeing it hooked to the water pump as well!
WOW, what a fantastic job, your care and attention to detail is absolutely amazing and a credit to you Sir.
@joez32976 жыл бұрын
Thank you for sharing this project.
@garakutadou6 жыл бұрын
Thank you!
@hatihatijp5 жыл бұрын
すごい技術力です!!
@nicolabooth60755 жыл бұрын
Excellent videos, you could do with a piston ring compression tool though, makes it easier to install the piston's, I used to struggle getting the piston's back in but that tool is great, keep up the great work of restoring these great old engines you do an excellent job every time
@garakutadou5 жыл бұрын
Thank you! Since this piston ring was soft, I pressed it with my hand :)
@erikj.20666 жыл бұрын
Very nice running engine you've got there. Good job cleaning it up!
@garakutadou6 жыл бұрын
Thank you!
@jasonstalder52085 жыл бұрын
another fantastic repair. well done. keep the videos coming
@garakutadou5 жыл бұрын
Thank you ;)
@seijimakkino6 жыл бұрын
素晴らしい技術と美しい仕上がりに感服いたしました。また見せてください
@garakutadou6 жыл бұрын
いえいえ(^^ゞ ありがとうございます!
@sgnt93376 жыл бұрын
Wow, its been along time since I've seen one of those foot start mechanisms.
@mediarolf5 жыл бұрын
I find it good, how calm and thoughtful the man does his job!
@kcraig516 жыл бұрын
Excellent work. Very authentic.
@garakutadou6 жыл бұрын
Thank you ;)
@aftershock22226 жыл бұрын
Thank you for posting. You did a great job!
@garakutadou6 жыл бұрын
Thank you!
@toniturnwald98906 жыл бұрын
Wow, good and amazing work. I would never learn that stuff to repair these motors / machines. Your films are pretty nice to watch and to learn, of course. cheerio Toni
@garakutadou6 жыл бұрын
Thank you!
@as37775 жыл бұрын
大変面白い動画で、色々と参考になりました。
@garakutadou5 жыл бұрын
ありがとうございます!
@user-ex5pp3yv3v5 жыл бұрын
素晴らしい!イグニッションコイルが切れてなくてよかったですね。
@sgnt93376 жыл бұрын
Impressive scratch-building work! It looks like these guys never throw anything away. Another wonderful job!
@garakutadou6 жыл бұрын
Thank you!
@jimmyduncan76504 жыл бұрын
Another wonderful job. I enjoy the metal fabrication too. You are very skilled.
@garakutadou4 жыл бұрын
Thank you!
@leesamuel88356 жыл бұрын
エンジン直るした時。感動します😃ありがとうございました😭💕
@garakutadou6 жыл бұрын
ありがとうございます!
@paulstanding72675 жыл бұрын
What a lovely sound and another lovely old peace of engineering saved from the scrapyards 😀😀
@garakutadou5 жыл бұрын
Thank you :)
@mattjohnson89026 жыл бұрын
This was very nice to watch thank you.
@garakutadou6 жыл бұрын
Thank you!
@foxhound95136 жыл бұрын
戦前のものなのにすごく綺麗ですね!
@garakutadou6 жыл бұрын
良い状態だったので助かりました(^^ゞ
@silentdeath92376 жыл бұрын
This must be a very rare engine I have never seen one like this before. Nice video.
@garakutadou6 жыл бұрын
Thank you!
@oddzylinderfudgrub19515 жыл бұрын
Damn son!!!! YOU MOVE LIKE A SURGEON! Wrench skill enthusiasm knows no country or color or gender. Keep the trade alive, my brother!
Very nice, I like the sympathetic restoration, something that seems to be dying out these day. Ive just finished a Maytag twin, in the same style as yours, part way through a Maytag single, that is a new paint job, and early in the new year I will be doing a sympathetic re-build on 1928 Version of your Briggs FH
@garakutadou4 жыл бұрын
Thank you!
@timothynewkirk26544 жыл бұрын
This was a very interesting repair and I also like the pump that the Engine is powering! ...Newk from Kentucky
@garakutadou4 жыл бұрын
Thank you!
@navyseal9455 жыл бұрын
博物館に展示級のレトロエンジンですね‼️ 凄いです😅
@user-zf9wu1el7k5 жыл бұрын
見事22分完成ストーリー、ほんとは2~3日は優にかかったでしょう、感動しました
@garakutadou5 жыл бұрын
ありがとうございます!
@user-is1fc3ft6v5 жыл бұрын
素晴らしい!100% OK!
@bombasticbuster93404 жыл бұрын
Chokes me up. American ingenuity. Briggs & Stratton!
Nut sparkplug is upsidedown! Sweet running little engine!
@garakutadou5 жыл бұрын
Thank you!
@Luckysevenization6 жыл бұрын
Es un placer verlo trabajar amigo. Bellas restauraciones.
@garakutadou6 жыл бұрын
¡Gracias!
@user-di1cw1vm5y6 жыл бұрын
こんばんは 修理の技術力、はんぱないですねー
@garakutadou6 жыл бұрын
こんばんは。 いえいえ、ありがとうございます(^^ゞ
@yizhi42815 жыл бұрын
真不错,看得出以前的机器结构简单质量非常好!谢谢你的分享。
@garakutadou5 жыл бұрын
謝謝!
@arthurmario59965 жыл бұрын
Yes, very pleasant to watch. It seemed that you improved the design of the cooling system very much. The original design had large fins on the cylinder, and very little on the cylinder head. The exhaust valve needs much more cooling air than the rest of the engine. Is this modification commonly done, or is it your knowledge?
@oodimvale6 жыл бұрын
Very good....congratulations....... São Paulo - Capital - Brasil
@garakutadou6 жыл бұрын
Obrigado!
@user-em2xy6kd7k5 жыл бұрын
オートバイの様な始動方法ですねw
@luiscataudella88815 жыл бұрын
gracias por mostrar como trabaja --- miro todos sus videos
@garakutadou5 жыл бұрын
Gracias!
@BenjaminEsposti6 жыл бұрын
Did you make the cart that it sits on? That's such a nice display piece, you've done a great job! This engine was likely made around 1930, plus or minus a few years.
@garakutadou6 жыл бұрын
Thank you :) Yes, I made this cart! kzfaq.info/get/bejne/q8yTfcqYvpbHnXU.html
Vous êtes passionnés et ça fait plaisir (un petit français) banzai!
@ludvigtande12365 жыл бұрын
Great job!
@garakutadou5 жыл бұрын
Thank you!
@TaRg3t2226 жыл бұрын
Really nice! I am amazed how well your stick welds are! Are you using an inverter? Oh and I came across a nice tip lately, for old rusty or casted parts with rough surfaces, you can use a "stove blacking paste". It looks really great, it protects the patina and blackens the surface. Its also called "stove polish" sometimes. You should really give it a try if you can find it in Japan.
@garakutadou6 жыл бұрын
Thank you! I am using Engine Welder :) I see, I thought that was a good idea!
@markjeffels33276 жыл бұрын
These things are always to clean and come apart to easily!
My word, how can anyone dislike this video. what a beautiful machine.
@garakutadou5 жыл бұрын
Thank you!
@99FoxDemon6 жыл бұрын
so quiet. did you disassemble and assemble the engine inside the library?
@garakutadou6 жыл бұрын
Thank you! Because there is no information in Japan, I studied on KZfaq videos :)
@jp-um2fr5 жыл бұрын
This transcends race, colour, religion, language, politics just about everything except the pleasure we all get from seeing something neglected brought back to life. Osoreirimasu
@garakutadou5 жыл бұрын
Thank you.
@frankierutherford18885 жыл бұрын
I think I know why you extended the front air deflected to cover the head. Probably because it was getting to hot witch caused the rings to get stuck. I would also assume that’s why it was put up. Just a guess but another great job.
@garakutadou5 жыл бұрын
Thank you!
@GGigabiteM5 жыл бұрын
The valve system on this engine is strange, the intake valve has no method of actuation. It took me awhile of staring at the engine until I think I figured out how it works. The engine uses crank case pressure to force the valve open with fuel from what looks like a primitive fuel injector/carburetor. I've seen other engines with this setup on this channel, but none were clear enough on how the intake valve worked.
@garakutadou5 жыл бұрын
The intake valve is opened by the negative pressure of the cylinder. Since the intake valve spring is designed to be soft, high speed rotation is not good :)
Oh, my god. Where do you get these "stone age" engines from?
@garakutadou5 жыл бұрын
This was purchased from a collector :)
@vcdios3 жыл бұрын
Great!! have you ever repaired a yaki dama engine?
@eliasavio435 жыл бұрын
VERY BEAUTIFUL👍
@garakutadou5 жыл бұрын
Thank you!
@CarlosCastro-cg2pn5 жыл бұрын
Buen tabajo para que función, pero ya que lo desarmo todo una restauración a fondo y esa maquinita daría pena usarla., que lástima. Así y todo está bueno hacer funcionar una maquinita antigua 👌
@garakutadou5 жыл бұрын
¡Gracias!
@jfree45135 жыл бұрын
Very cool.
@luiscataudella88815 жыл бұрын
he visto varios videos -- siempre trabaja en el suelo -- eso me llama la atencion -- no utiliza un banco de trabajo -- ¿¿ porque ????
@garakutadou5 жыл бұрын
Gracias! El suelo es todo mi escritorio ;)
@1019ha5 жыл бұрын
精度が高い工作機械で製作された物ですね。アメリカに戦争負けたの解ります。
@garakutadou5 жыл бұрын
日本では石油発動機がやっとの時代、米国ではガソリン発動機が量産されていた時点で…orz
@bobferranti52225 жыл бұрын
I hope you sent this video to Briggs and Stratton!
@mschiffel14 жыл бұрын
Bravo !
@jameshanoomansing14426 жыл бұрын
excellent
@garakutadou6 жыл бұрын
Thank you!
@fumatelauna6 жыл бұрын
ottimo lavoro! ^_^
@garakutadou6 жыл бұрын
Grazie!
@ramiruhig55585 жыл бұрын
So creative
@garakutadou5 жыл бұрын
Thank you!
@muhamadhamami38115 жыл бұрын
Good job
@garakutadou5 жыл бұрын
Thank you :)
@muhamadhamami38115 жыл бұрын
@@garakutadou watashi wa Hamamj desu.. Anata wa onamaewa?
@garakutadou5 жыл бұрын
I'm Garakuta :)
@user-gw4zs8jr9t4 жыл бұрын
発動機とかのエンジンかな?
@user-bi5by5ps6s5 жыл бұрын
О привет ! Давно не заглядывал к тебе. Я вижу ты всё ещё держишь планку ремонтов. Ну так держать !
Good day! Can you tell me what lapping paste is used when lapping the valves?
@garakutadou5 жыл бұрын
Thank you! Medium paste and not special.
@266eddy6 жыл бұрын
DAM nice JOB
@garakutadou6 жыл бұрын
Thank you ;)
@gearnoggin6 жыл бұрын
Great work! I was just wondering though, why did you cut and re weld the top of the blower housing?
@garakutadou6 жыл бұрын
Thank you! Although this engine is FH type, the housing was a different L1 type. I was welded because the length was insufficient. 16:25 is a picture of before and after ;)
@redwolf56645 жыл бұрын
音がいい
@garakutadou5 жыл бұрын
ありがとうございます。 いい音ですよね~
@daninelrio57036 жыл бұрын
Y la válvula de admisión se abre sola? Con la succión del pistón?