I Built Arasaka Motorized Helmet (Cyberpunk 2077)

No video

I Built Arasaka Motorized Helmet (Cyberpunk 2077)

Рет қаралды 308,844

Күн бұрын

Engineering, cosplay animatronics, new 3D printing techniques... this project really pushed me to my limits - but it's finally done! After building Oda's mantis blades, I wanted to complete the entire outfit. I love blending engineering and fashion/cosplay.
His helmet - was such an iconic, challenging piece, and I hope you guys learn something from this video!
A special shout out to CD Projekt Red for creating Cyberpunk 2077, as well as providing me the high resolution assets so I could make such an accurate piece!
Support me on Patreon!
➡️ / zibartas
And here's your Zibartas Discord invite! If you like DIY/nerdy stuff, you should check it out!
www.zibartas.co...
Featuring B-roll footage from CDPR, Cyberpunk 2077, and ‪@omaruisfed‬ !
_______________________________________
Find more goodies on my social media accounts:
x.com/zibartas
/ zibartas_cosplay
/ zibartas
Also, I have a website:
www.Zibartas.com

Пікірлер: 606

@CyberpunkGame Ай бұрын

This is insanely cool! Well done

@Zibartas Ай бұрын

Thank you!!

@SomeChannelBitch Ай бұрын

@@Zibartas Personally you look really badass at 11:20. Loved the attention to detail you've done!

@original4046 Ай бұрын

What are you chooms doing here

@beanie.weanie Ай бұрын

u should totally give me a free copy

@captainsewerrat Ай бұрын

@@beanie.weanie You should totally have a job that provides you enough money to purchase a single game.

@tylermiddaugh1515 2 ай бұрын

thats some serious chrome youre running there choom

@cod9491 Ай бұрын

better hope some gonk borg doesn't flatline 'im for a couple of eddies only for his fixer to haze 'im after bein' paid off by some highrider n' zeroed by that same alien, if it does happen hope he knows a good shoemaker that wont turn his back for a little scratch n' if not they might be better off becomin' a zombie this is for individuals who may not understand that fully; better hope some idiot with a bunch of implants/cyberware/body mods doesn't kill him for a bit of money only for their employer to backstab them because some rich space dick paid them to rat him out before being betrayed by the same rich astrofuck, and if it does happen well i sure hope they know a good forger they can trust to not go behind their back for a few dollars and if not they might be better off killing themselves *thundercrack* edit; forgot to translate the borg

@randomcommenter1812 Ай бұрын

Klep it

@AidilAfham Ай бұрын

Very preem

@painauraisan 24 күн бұрын

I think he might even run some kiroshi optic. Comment based of a moment where his eyes look purely white: 11:43

@tylermiddaugh1515 23 күн бұрын

@@painauraisan yeah hes def running oracle kiroshis

@HarvestLYlee Ай бұрын

11:20 your death glare with bangs as the visor open is Chef's Kiss

@user-lw6lh6rb5o Ай бұрын

Yea, hes looks like a real villain

@Cornsnake-p9v 2 ай бұрын

That is the coolest thing I have seen in a while

@CHEFPKR 2 ай бұрын

The amount of work put into this is insane, but the video is also so well put together. I am very jealous, choom.

@Xn2251 Ай бұрын

no replies???

@-LIFE- Ай бұрын

Yo! The chef himself!

@MrVolt 2 ай бұрын

Insane dedication. The mask elements are a work of art!

@Zibartas 2 ай бұрын

Thank you my man!!! I am really happy you liked it!!!!

@blueflame5081 2 ай бұрын

The way the light catches your contacts is perfect

@Ja_moak 2 ай бұрын

Every of your tech are just so hella cool. I am so looking forward to the next one.

@Zibartas 2 ай бұрын

I appreciate that!!!

@fourthpanda 2 ай бұрын

Jackie might even say that this netrunners chrome is preem choom.

@Tarudizer 2 ай бұрын

Who the hell are you to just suddenly appear on my feed and drop the coolest looking shit Ive ever seen in my life? Very impressive work and the end result is just incredible

@ZioBlu 6 күн бұрын

I'm speechless at the amount of skills involved, from 2d/3d design, to printing/sanding/painting and finally hardware/software building/coding WOW

@inventorsyndrome8894 2 ай бұрын

There is seriously such a level of professionality that I have never probably seen before in cosplay...I really love it

@user-lw6lh6rb5o Ай бұрын

Zibartas with the suit and helmet and the mantis blade was looking like a villain, his face really fits a villain

@Viking_Raider719 2 ай бұрын

you should try to make johnny silver hands guitar and his pistol and maybe his jacket that would be pretty cool

@gamerpl9037 2 ай бұрын

And silver hand

@Zibartas 2 ай бұрын

I already built Johnny's arm from real metal, I made a vid on it!

@gamerpl9037 2 ай бұрын

Haven't neticed it cause it's 3 y/o, but ye, great build as always + Johnny's gun with all this moving elements 'd be sick

@revemb4653 2 ай бұрын

Hell yeah

@Goobermcgooberson625 Ай бұрын

Y'know, I have a feeling, that if this guy started selling some of the stuff he's made, he'd be making serious cash, keep up the good work choom

@thefumexxl Ай бұрын

Very few people want to pay what this work is actually worth when you consider the labor and time + the small scale of his ability to make stuff. People always say this shit to these kinds of creators, but you realize he spent a few hundred hours just printing the visor aloen.

@Goobermcgooberson625 Ай бұрын

@@thefumexxl didn't really need a whole paragraph of an explanation that it took him a while to make that, I get it, but I was just saying it to say it.

@user-qi2gq6ef3w 8 күн бұрын

@@thefumexxlsome cosplayers WILL pay for this huge amount of money. Some of them bought cosplay helmets from one russian guy back in the mid 10s and they payed thousands just to get it from him and only him. His helmets were good, really good but this... This guy is on another level, god tier level of crafting.

@shassafrass1770 7 күн бұрын

I really appreciate you showing your failures and how you learned and adapted to the results. I feel like a lotta people just put a time-lapse on for that kind of stuff but it's really nice to see what kind of work goes into making an idea come to life.

@crozraven 2 күн бұрын

Arguably the best & most dedicated of CP2077 cosplay so far.

@chowow18 2 ай бұрын

Your attention to detail is insane! Such a cool piece, especially paired with the mantis blades. Can't wait to see more preem builds

@wunclerlaufenbumcorneliusu7047 4 күн бұрын

“YOU SHOULD HAVE QUIT AND LEFT THE CITY” This is amazing. Great work.

@zoltikrys 2 ай бұрын

We got Oda in real life before GTA 6 Joking aside this is metal af, good job choom!

@Triflixfilms 2 ай бұрын

I dont know how you ended up in my sub box, but I am glad you did... sick af!

@Zibartas 2 ай бұрын

It's a cyber ninja skill :D

@thinkgoldenz1o148 5 сағат бұрын

Bro, both combined is insane.

@trollerbladdering Ай бұрын

People like you make me want to go and blow thousands of dollars and try to do something like this, but then I think about bills and realize that it's not plausible at the current juncture. This was amazing. I just started playing CyberPunk 2077 a couple days ago because of the Steam Summer Sale, and I'm just blown away by this game.

@chinbalus8258 2 ай бұрын

HOLY HELL!! i was waiting this video XD. When you spray it with black paint, my mind literally went OOOOOOH, that how it you made the lines. Really did a amazing work!!!!

@FellightC 2 ай бұрын

Your dedication to finish this project is something else but that dedication absolutely gets rewarded! The result is amazing and absolutely badass! I felt your pain through the screen with the failed prints and the piece that fell and broke 😭

@Zibartas 2 ай бұрын

Aww thank you

@cable7152 2 күн бұрын

That is the coolest thing ever. Next time, count it as carry-on, never trust the airline with such a piece of art.

@coreyano 2 ай бұрын

Insane. Any studio should sign this guy to a lifetime contract. Unbelievably good. Amazing. Master craftsmen. Genius. So cool

@unagisama5476 10 күн бұрын

The effort and not chasing the algorithm w clickbait just made me a subscriber.

@Gruff_rift 2 ай бұрын

Nova choom keep up the work

@thundolis 2 ай бұрын

One of the things I do now is do a 20% per volume mix of high durometer flex resin to large prints, You end up with an "super resi" that is resistant to breakage and is fully machinable

@SidekickElements Ай бұрын

Best way to make the visor: engrave/cut the pattern onto a flat sheet of polycarbonate, then vacuum form it onto an FDM printed mold Then proceed according to your process of spracing and sanding. (can probably spray and sand while it's still flat actually, so you can use an electric sander).

@Iguana93 12 сағат бұрын

I would also have gone with vacuum formed PETG, simply because shells from resin are so brittle (and internal tensions can make them deform and crack even long after curing). It would perhaps look a bit different but surely not worse and it would be much more durable. You would have to sand it after the vaccuum forming though, there's no chance of the paint withstanding the bending and temperature. But this result is amazingly cool either way.

@SidekickElements 11 сағат бұрын

@@Iguana93 Maybe with a polyurethane based paint? That should be elastic, and I think there are high temperature polyurethane spray coating for automotive applications.

@Iguana93 3 сағат бұрын

@@SidekickElements Perhaps? But even the elasticity in those is meant for natural flexing in the substrate. Vacuum forming introduces huge dimensional changes.

@lucabellemoi3851 9 күн бұрын

Your helmet and mantis blades are just masterpieces.

@NimVim 2 ай бұрын

Looks AWESOME!!

@Zibartas 2 ай бұрын

aw thank you!!! A project of passion! :D

@Owlwings21 25 күн бұрын

This might be the coolest thing I have ever seen someone make on KZfaq.

@luismanuelcastro486 2 күн бұрын

Just one word: Amazing. Thank you for sharing the overall process and final result. 🤩

@hugosharman Ай бұрын

this is mental! remember seeing this on tiktok a little while back, to go from nothing to a perfect replica of something that dosen't even exist in real life is outstanding!!

@Bean_Soup 2 ай бұрын

My jaw physically dropped when the final polished pieces glowed with the light below it. This is an absolute work of art.

@monarchxero1822 Күн бұрын

This is so cool. So much work and it definitely paid off.

@istealchips 2 ай бұрын

The micro details and work you did looks fabulous

@peckapuncher2101 10 күн бұрын

This is incredibly well done! Props to the dedication you've put into this project.

@Fei-f1b Ай бұрын

The cyberpunk mask I bought from the AMZ foymi store is also very good. I hope they can make such products sooner.

@tomerrozenman4484 13 күн бұрын

Incredible! Thats a show stopper

@eugenechelovechniy Ай бұрын

Every time I come across channels with wild cosplays and every time I don't understand where they get so much money for such tools and materials.

@sycho-tech5104 Күн бұрын

your next enclosure for your helmet needs a hard outer shell and a soft inner layer to absorb the impacts.

@NorseBlade 2 ай бұрын

First of all this is an insanely amazing build. It definitely deserves more attention. I love the sheer dedication to recreate something that - until now - only existed on screen with such accuracy and detail. (For those who are wondering what the song during the showcase at the end is: NEFFEX - "How it's Supposed to Feel")

@snakezase2998 9 күн бұрын

A thing of beauty never fades away

@yuiitsu9757 2 ай бұрын

I'm extremely enthusiastic about delving into the Cyberpunk 2077 environment. The helmet and costume are cool. Cyberpunk 2077 has been a huge inspiration for me on multiple levels. After playing it four times, I can't help but wonder if the technology depicted in the game is a glimpse of our future.

@Phiqtional Күн бұрын

That looks so sick. Amazing work man!

@Nepartinis 8 күн бұрын

That is most impressive cosplay piece ever created!

@Joel-vq3ch 7 күн бұрын

honestly a giant crack in the middle of the mask would look dope!

@LeinadFromMars 9 күн бұрын

This might be the coolest thing I've ever seen

@CosmicApathy Ай бұрын

I have never played Cyberpunk but I would give both my kidneys for a mask like that. Great work!

@thedemonclown555 2 ай бұрын

I think this is my favorite cosplay I've ever seen

@conorstewart2214 2 ай бұрын

This turned out very good. As for the issues with the servos, it is a well known issue with classic arduinos, the servo library uses software timers to toggle the pins, not hardware, so anything that interrupts the arduino, like interrupts or likely wireless features, or just things that take a while to complete, can affect the software timer and therefore can affect the signal being sent to the servos causing them to jitter. To fix it you can either use a servo driver board which contains hardware timers or just use a microcontroller that has hardware timers.

@HaasGrotesk 2 ай бұрын

There's a level... Then there's your level... Not a lot of people reach your level dude! Every time you build something it's amazing!

@southernlocust 2 ай бұрын

Hands down one of the most inspiring cosplay vids I have seen in some time. Well done Choom!

@TheCrispyOneD2 25 күн бұрын

AND IT WILL COME, LIKE A FLOOD OF PAIN, POURING DOWN ON ME! He's literally monsoon.

@blitzme99 Ай бұрын

this is an incredible piece. I didn't even know you could do something like that with resin.

@NightWink129 Ай бұрын

1:12 "Looking cool while breathing." 🤣 What a great result, dude, and nice touch with the eye contacts. Nicely done on the process of building it. I admire your patience and follow-through!

@hannesmo 2 ай бұрын

holy crap, this is awesome on so many levels!

@kabosustan2484 2 ай бұрын

You look really cool in that helmet, the way the the lights catch your eyes looks so good, and maybe a bit blinding.❤

@ElmoPlayss 2 ай бұрын

11:13 the color lenses you put in your eyes made you look awesome even without the helmet being on! Thank you for doing this it looks absolutely awesome! I want to buy one 😂

@Limeasaxdar 2 ай бұрын

Woah! Chromed up!

@BloPsy__ 2 ай бұрын

I can just hope that you will dive into more Cyberpunk stuff. There is so much in the world!

@deadeyeduncan5022 Ай бұрын

Wow man that's so cool, if they ever attempt something live action with cyberpunk that costume dept better be talking with you. The quality of your work is outstanding.

@Tomcat_Centauri 2 ай бұрын

Gosh i want your Channel to blow up, you really deserve it !! The attention to detail, functionality of your Props, and the fact that you just don't give up despite the setbacks and failures ❤ You have incredible skills, your projects are fantastic and on such another level, you belong up there with the top European cosplayers 🥰🥰

@YellowRabbit125 Ай бұрын

Wow choom! that chrome is NOVA!!

@Lensko59 Ай бұрын

I can tell through the pain and countless attempts you wouldn't be so keen on selling this as a product, wouldn't be worth the headache. Amazing build my friend, Cyberpunk is an amazing world to experience. (Not in reality though, that would be a nightmare)

@judethenekogamer3651 Ай бұрын

already living in that world

@lemmiix 2 ай бұрын

I think the crack actually adds more than it takes away the awesomeness of the helmet. Nice work!

@Zx7o. Ай бұрын

This just made me want to order and get into 3D printing. HOLY BALLS DUDE!!

@stevendeamon Ай бұрын

Bro wtf this is top notch quality work! Your skills are off the charts!

@Downfall466 2 ай бұрын

Bro you got a lot of patience for this! I would've just given up after wasting so much resin on the printer.

@brucewayn1989 2 ай бұрын

ok, you are actually irl oda. you look like him 100% 🙌

@ktankinfinity 2 ай бұрын

Dude thats amazing, words can genuinely never experss how awesome this is!

@Balrog132 2 ай бұрын

I wish I was capable of designing print files like this. Awesome work.

@Ponchu04 Ай бұрын

your such a god for making these type of stuff its so cool seeing them in real life

@uniworkhorse 2 ай бұрын

Dude. This was a labor of love, idk how you do it bro, but this is absolutely amazing!

@paprickachicken5277 2 ай бұрын

great job choom , best techie a runner could ask for

@Inappropriatematt 2 ай бұрын

That’s some dedication. I’d have been swearing and crying at the amount of print failures. Nice work.

@Zibartas 2 ай бұрын

That happened off camera.... :D:D

@corruptedmineral 2 ай бұрын

the fact that your eye kinda shines too is crazy

@Gl055y 2 ай бұрын

i like how this is coming together, Keep it up!

@knightlautrec4311 Ай бұрын

Each part looks great solo but together looks sick!

@jaredrose8620 2 ай бұрын

Bro, you really look like some kind of cyberpunk final boss, IMHO

@zenboy21 7 күн бұрын

Awesome work, mate. Beautifully done! 👍🏾

@PhillipVella 2 ай бұрын

You need a Pelican Case for transporting that work of art!

@Numbskulli 2 ай бұрын

Excited for this video! The mask looks awesome.

@Zibartas 2 ай бұрын

Hope you like it! It literally brought me to the brink, and back :D

@Numbskulli 2 ай бұрын

@@Zibartashaving watched all of it, i absolutely loved the video! Astonishing amount of work and effort, really good job!

@Ernzt8 2 ай бұрын

That looks so much like the one in the game. Excellent work!

@edmo1450 Ай бұрын

the response time of that helmet closing feels so fluid.

@fleity 2 ай бұрын

This entire build looks so freaking cool. Fantastic work. It would be super nice if you could look through the mask though.

@randomcommenter1812 Ай бұрын

Your channel should have more subscribers in the future. These builds are insanely good.

@lawnmowerdude 2 ай бұрын

Dude that is SO freaking COOL!

@Rayqauzay 2 ай бұрын

Wow, never thought about sanding off the paint

@MegaHorrorLP Ай бұрын

Dude. This is really cool. I've seen some builds for the mantis blades, but none for the helmet. The look is nailed perfectly. Kinda want to have one too ^^

@Iridescent_ninja 2 ай бұрын

Please never stop making these videos !!!!!! I feel so inspired even though I know nothing about how you made it .

@acki690 2 ай бұрын

That is so insane holy sh*t. i wish i would know how to do that. Congrats man, this must be the sickest cosplay i've ever seen. I Hope I'll see it in real life one day

@NextSummon 2 ай бұрын

Amazing work, love the attention to detail and passion for the craft. I'm glad you kept going despite the setbacks, it was definitely worth it. Those shots in low light at the end were chef's kiss 🤌 (and oof I thought having part of a cosplay go missing during long distance travel was the worst that could happen but this just unlocked a new fear)

@Zibartas 2 ай бұрын

As it comes to cosplay travel - airtags are our friends! :D

@jackburton5085 2 ай бұрын

Man, you made one of the coolest things I've ever seen... it's amazing! My most sincere congratulations, it turned out very well, and you worked so hard, you deserve all the compliments possible.

@Bryantozero 2 ай бұрын

I've not been looking for Cyberpunk stuff, but i am playing the game and this was in my Feed. Thank you algorithm! subscribed, i'm so jealous of your skill!