ZOHD Altus - Flights
Рет қаралды 5,934
3 ай бұрынTwin motor V-Tail FPV model 980mm wingspan.
Very smooth and efficient with clever design elements.
ZOHD Altus - www.banggood.com/custlink/mGm...
My flying weight with ZOHD Li-ion 4S 3500mAH 18650 and HD FPV - 895g
Kit version with 22038 1750kv motors and 7x4 props
20A BLHeli ESCs
ELRS Receiver
AtomRC F405 Wing NAVI board and Matek GPS
Specifications:
Brand Name: ZOHD
Item Name: Altus
Material: High-Quality EPP
Wingspan: 980mm (38.58")
Length: 770mm (30.31")
Version: KIT, PNP (optional)
KIT Empty Weight: 365g
PNP Empty Weight: 545g
Recommended ZOHD Power Combo Configuration(Not Included):
- Twin Motor: 2204-1870KV
- Twin ESC: 30A w/5V 2A BEC
- Servos: 4pcs 9g metal gear servo
- Propeller: 3 blades R42
- Recommended Battery: Lipo 4S 2200-3700mAh or ZOHD Lionpack 18650 4S2P 7000mAh
- Radio System: 2.4GHz 6CH
KIT Version Included:
1x ZOHD Altus EPP RC Airplane KIT
KIT package size: 450*250*160cm
KIT package weight: 710g
PNP Version Included:
1x ZOHD Altus EPP RC Airplane KIT
2x 2204-1870KV Motor
2x 30A w/5V 2A BEC ESC
2x 3 Blades Propeller
PNP package size: 450*250*160cm
PNP package weight: 830g
Like, Subscribe & Ding the 🔔 - bit.ly/ANsubscribe
🔎 More information 🔍
► Newton Airlines Uncut - bit.ly/NewtonAirlinesUncut
► Newton Airlines blog - newtonairlines.blogspot.com.au
► Build plans - newtonairlines.blogspot.com/se...
► My portal - anewton.net
► My Thingiverse - www.thingiverse.com/andrewrcn...
► INAV Basics and FAQs - newtonairlines.blogspot.com/se...
► INAV Trouble-shooting Check list - newtonairlines.blogspot.com/20...
► Best INAV Radio and receiver - newtonairlines.blogspot.com/20...
► Depron Armin Wing build - • Depron wing build
I am happy to help with questions, but before asking, please read the description, read through other comments, use the video search box.
👌🏽Support this channel 👌🏽
This KZfaq Channel is a just fun hobby for me, not a money making venture.
I don't have a Patreon account, and choose the minimum possible advertising option. However if you would like to show your appreciation and support this channel here are some options -
►Paypal donations to apnewton@gmail.com
►Affiliate links - Purchase using the links provided in the video description.
If you use the affiliate links to make a purchase I may receive a commission at no extra cost to you.
👀 No single review will tell the whole story. Be clever, watch other reviews and shop around before making any purchase.
#AndrewNewton #ZOHDAltus #vtailtwin
@JDDupuy 3 ай бұрын
ZOHD screwed that servo issue up. Glad to know to buy the PNP not the kit. How do manufacturers not realize this. Bad move on their part!
@AndrewNewton 3 ай бұрын
Would be simple to include a link to the right tail servos, or an option to buy the kit with them
@IanF-FPV 3 ай бұрын
@@AndrewNewtonAlmost makes the kit seem like a crash kit for the pnp. Now I need to order a set of their servo before I finish this build.😢
@Bellairvideo 3 ай бұрын
Wonderful indeed #1. Very well explained & flown on such a lovely spot.
@AndrewNewton 3 ай бұрын
Thanks mate.
@AerialWaviator 3 ай бұрын
Very nice first look and first flights. Was had to tell difference between manual and auto/cruise as video for both seemed smooth. Lots of great info. (both in video and the description) In past ZOHD has made available servos, esc and motor available as spare parts, but that inventory dried up with logistics challenges of past couple years.
@AndrewNewton 3 ай бұрын
Yes everyone is out of stock here in Aus
@jimross898 3 ай бұрын
Good tip on the PNP vs Kit tail server gear issue. It would make me very sad to find out after the fact as I doubt I'd have servos that worked. A weird quirk of design. And what an awesome flying spot!
@AndrewNewton 3 ай бұрын
👍🏻
@DavidTaghehchian 3 ай бұрын
Looks like this plane has grrat potential. Looking forward to your bench top discussion video.
@AndrewNewton 3 ай бұрын
👍🏻
@TheCatFather01 3 ай бұрын
Really helpfull tip in regards to tail servos, thank you🙏🏽
@AndrewNewton 3 ай бұрын
No problem 👍
@rjung_ch 3 ай бұрын
Thanks Andrew 👍💪✌
@AndrewNewton 3 ай бұрын
👍🏻
@CarlosMartinez-ff6vm Ай бұрын
Great video!!!
@AndrewNewton Ай бұрын
Thank you!!
@dronepilot260rc 3 ай бұрын
I’m liking it! Thanks for the info! 🎉
@AndrewNewton 3 ай бұрын
Glad to hear it!
@northernfpv9562 3 ай бұрын
I noticed the stall on my maiden too. It recovers very quickly but it stalls at a higher speed than I’d expect. I flew it on cg with a 4s 3600 Lipo. You can’t glide in - power has to be kept on the whole time. I also noticed that it wants to pitch up as you add power. It wasn’t the perfect maiden, but with some time and tuning I’m sure it’ll be fine. Launch was zero drama with no fc.
@AndrewNewton 3 ай бұрын
Oh, good to get your confirmation about the wing dip.
@pilotmiami1 3 ай бұрын
Yes.yes.bravo.thenks
@AndrewNewton 3 ай бұрын
😃
@AdrianoCasemiro 3 ай бұрын
As always, some beautiful flying, right? Also, nice model for fpv. I wonder if it could take a full fledge gopro onboard while flying this nice.
@AndrewNewton 3 ай бұрын
Yes, space designed for it, but maybe not the latest larger GoPros
@peterross9541 3 ай бұрын
"so fresh" and again..nothing forgotten to explane, and to talk about. A question for the VTOL-Version : Is there enough place in the front for placing the lipo more forward, to beware the right CG again..?❤
@AndrewNewton 3 ай бұрын
Good question. Might need more weight forward
@peterross9541 3 ай бұрын
@@AndrewNewton YES.. more wheigt in the nose, cause of the YawMotor in VTOL-VERSION..
@AndrewNewton 3 ай бұрын
@@peterross9541 But more weight forward from the tilt mechanisms, so it may balance out.
@gazalazzz6989 3 ай бұрын
Beautiful👍. It seems smooth and steady. Because of the good tune of PID parameter of the flight controller, or the performance of the plane itself?🤔
@AndrewNewton 3 ай бұрын
Stable by itself. Good design
@BrainDeadEngineering 3 ай бұрын
I want one. Its Amazing it fly's so well with Anhedral ! you think Didedral would just be a natural thing to do !
@AndrewNewton 3 ай бұрын
Forward sweep, not anhedral
@Sebas-lk3jv 3 ай бұрын
how about the new fixed wind tail plane from atomrc called theer. hope to see you test it soon. Getting the altus soon.
@AndrewNewton 3 ай бұрын
👍🏻
@dronepilot260rc 3 ай бұрын
Wondering if it would do well with some 6042 Gemfan flash props ? 🎉
@AndrewNewton 3 ай бұрын
Yes I must buy some
@evilredd 3 ай бұрын
Hi Andrew I’m having some issues with my SB405Mini…I’m on analog and at launch (38amp) my OSD completely disappears. I noticed in your video you only pulled 7amps and it’s a digital system which shouldn’t change anything I believe. I’m almost leaning towards the FC not handling the amps as I have been trying other bits from other models with no luck. I normally use Matek and this power setup is from on another air frame using the Matek FC without issues.
@AndrewNewton 3 ай бұрын
Vv is unfiltered so at that high throttle there is probably too much interference getting in to the FPV circuit. I would add an LC filter to the VTx power line.
@OZSCQUADS 3 ай бұрын
very nice. would love to know how you got OSD in your video. Or is that a avatar thing?
@smithe68 3 ай бұрын
If you are using INAV you can have OSD with a few different systems, I’ve got it on DJI O3 and Caddx vistas. There are options for analog and Avatar as well.
@AndrewNewton 3 ай бұрын
WTFOS hack to make all the INAV OSD elements available, and the WTFOS web interface has an app to overlay the OSD on your video
@jonoedwards4195 3 ай бұрын
ZOHD Rules
@skyforce1983 3 ай бұрын
Ooooohhhh yeaaaa
@jonoedwards4195 3 ай бұрын
@@skyforce1983 Hello Mate! Aahahahah
@AndrewNewton 3 ай бұрын
🤙
@cococadidi Ай бұрын
I've ordered the pnp version. What do you recommend for fvp? I'm new to fpv. Not wanting to break the bank.
@AndrewNewton Ай бұрын
Go to my blog (link in the description) and click the FPV tag for info. Best to try analog first because digital FPV will break the bank
@atw98 3 ай бұрын
Have you tried the VTOL, or a VTOL yet? If you have must have missed it.
@AndrewNewton 3 ай бұрын
Manta VTOL - www.youtube.com/@AndrewNewton/search?query=VTOL
@Chilternflyer 3 ай бұрын
just out of interest: It looks like you're using WTF. What is the font set you are using?
@AndrewNewton 3 ай бұрын
SneakyFPV's Hemi font I think
@JD_1 3 ай бұрын
🤔
@MasboyRC 3 ай бұрын
Try to fly long range fpv sir
@AndrewNewton 3 ай бұрын
Not a good idea to show long range videos. The authorities are watching
@pstarxxx78 2 ай бұрын
@@AndrewNewtonit’s not even the authorities that’s watching. It’s all the lil snitches that love to report to the authorities.
@helidude71 3 ай бұрын
Osd video is not smooth at all. Some rolling/wave like distortion on it...
@wattage2007 3 ай бұрын
Yeah, some pretty bad microvibration going on there. May just be the camera mount, or unbalanced prop/motor.
@AndrewNewton 3 ай бұрын
Might be bent motor shaft
@zeyou7048 3 ай бұрын
@HAOHAN Innovation
Cool Items Official
Рет қаралды 24 МЛН