ZOHD Dart 250g Maiden & Overview - Setup with iNav & Li-on Batteries

Рет қаралды 16,402

4 жыл бұрын

This is the maiden of the ZOHD Dart 250g I bought here bit.ly/39kPmNB with a FULL RUN DOWN on my current setup as I'm using a 2S li-on pack for it with iNav, hence the flight times are CRAZY long! FULL setup details below, Press SHOW MORE to see them. Matt
IMPORTANT:
All items shown have been BOUGHT out of MY OWN money for my own abuses. They are NOT a "freebies for review". As such my opinions of these items and anything else shown here may differ from other reviews because I've actually "bought it".
ZOHD Dart 250g
- - - - - - - - -
View/buy link: bit.ly/39kPmNB
I went for the FPV kit, however now having owned this one and the Drift, definitely go for the PNP kit. The motor, ESC and servos are "good".
UDPATE:
This configuration has got me over 40Km in total distance flown!
iNav Settings Dump
- - - - - - - - -
pastebin.com/PxtZ12Ru
My Configuration
- - - - - - - - -
Motor, ESC, Servos all stock. Using the 2 blade 5050 propeller
Flight Controller - bit.ly/2WE2TL6
GPS - bit.ly/2CQ5ECw
Front Camera - bit.ly/3jqiGqq
Rear View camera - bit.ly/30pBOwq
FPV
5.8Ghz vTx - TX526 - bit.ly/2HBOKVm
5.8Ghz Antenna - bit.ly/2Fmey5z
5.8GHz Goggles Antenna
- Diamond - bit.ly/2FlC9DF
- Clover - bit.ly/2Fmey5z
Definitely not using this bit.ly/3eN4Aw2
Batteries
LG MJ1 18650 Li-on batteries, soldered myself.
Receiver
- TBS Crossfire Micro V2 - www.hobbyrc.co.uk/tbs-crossfi...
- Immortal Antenna
Transmitter & Module
- Taranis - bit.ly/2XGra1m
- TBS Crossfire Full Tx module - www.hobbyrc.co.uk/tbs-crossfi...
Andrew Newtons Video on Calibration & Setting the Brake
- - - - - - - - -
• ZOHD Drift ESC brake, ...
ZOHD Dart 250g Description
- - - - - - - - -
Brand Name: ZOHD KIT
Item Name: Dart 250G
Material: High-Quality EPP
Wingspan: 570mm (22.44'')
Length: 379mm (14.92in'')
ZOHD Dart 250G - Kit : 89g
ZOHD Dart 250G - PNP: 138g (including motor, esc, servos, prop.)
ZOHD Dart 250G - FPV: 161g (including ZOHD Kopilot FC, GPS, VC400 Camera, no battery and receiver)
ZOHD Dart 250g Features
- - - - - - - - -
1. AUW is less than 250g, ideal to comply with Sub250g regulations
2. Durable EPP material, built-in CF spar for enhancement, crash resistant
3. Being light-weight will be safe to fly anywhere, anytime. You’re avoiding the hassle of an
FPV registration
4. Glue-free assembly, the main wing and tails come with pre-applied adhesive tape, just peel
it off and install them
5. Large battery bay for extended flight time
6. Nose camera bay compatible with all FPV and AIO cameras in the market
7. Cover for the fuselage bottom, super durable, protecting the fuselage bottom from
scratches
8. Servo arms are well protected by an EPP hump
9. Built-in CF rod in the ailerons will give precision and sharp action to your inputs
10. Dedicated equipment bay for Flight Controller and GPS
11. Main wing leading edge cover for those unexpected impacts
12. Textured areas on both side of the fuselage, for more secure hand launch grip
13. Optimized air-cooling design will keep your gear safe from overheating
ZOHD Dart 250g
- - - - - - - - -
View/buy link: bit.ly/39kPmNB
00:00 Introduction
??:00 Dart 250g Overview
??:00
??:00 Auto launch
??:00 What the lads think of it
#ZOHD Dart250g #RC

Пікірлер: 84

@RagTheNutsOff 3 жыл бұрын

Enjoying what you're watching? ❤️ You can now support Matt from just £1.99 per month here kzfaq.info/love/WP6vjgBw1y15xHAyTDyUTwjoin ✅ Kept up to date with the latest events ✅ Early access to New Videos ✅ Updates on projects being worked on in the background ✅ Special emotes for comments & live chats ❤️ For full details, click here kzfaq.info/love/WP6vjgBw1y15xHAyTDyUTwjoin

@RagTheNutsOff 4 жыл бұрын

Update: With this setup I have flown the the Dart 250g for 42Km total distance in one flight. Expect a couple of follow up videos with the Dart 250g as I've flown it every day its not been raining since it first flew! Any questions or comments welcomed below, Matt

@zatbr1 4 жыл бұрын

I see that you like this one better than the zohd fart from previous videos 🤣

@Quadcopterguide 3 жыл бұрын

Very cool. Been itching to build a powered wing, seems like a decent compact option. Thanks for the vid!

@justinsurla6043 3 жыл бұрын

Nice review matt i learned something today keep it up

@RagTheNutsOff 3 жыл бұрын

Hey Justin, happy days. Matt

@kartherton 4 жыл бұрын

My fpv Drift is on its way. O yes. Thanks for the info matt.

@adrianryan1975 4 жыл бұрын

What a great model. Another win for zohd

@RagTheNutsOff 4 жыл бұрын

Morning Adrian, yes, this one has had some knock on effects. You'll find out about them hopefully soon :) Matt

@pokerchannel6991 2 жыл бұрын

you are the only one that was I was able to easily find who is using the li-on. I searched for dart lion and found you. I am new so I am doing research and I believe i need lion for the long flight fpv aspect of things.

@devilsreject78 2 жыл бұрын

I was having so much trouble trying to get my Dart to Launch now I find two different videos where the launch angle is set one is 25 yours the other one is 30 mine was set at 18 I'm going to try to adjust this setting and I hope to God I can get in the air finally I'll keep you posted you make awesome videos very good you're basically the Joshua Bardwell of fixed wings

@jannesbosma9801 4 жыл бұрын

I found that gluing the vertical stabilizers to the wing over the full length prevents the bottom part to break off one sad day. Love this wing. It's not so fast but super agile and stable. I've got an air unit in it. Are you going to share how you laminate and add that silver?

@FastSloW-qt8xf 2 жыл бұрын

Got one getting delivered today. Will be nice having a backup plane for when my ar wing gets ripped to pieces

@martinmacko7297 3 жыл бұрын

Hi, great build, planning to do very close build! Lots of info! How do you laminate? Some link to foil and tools? Thanks!

@FunBitesTV 4 жыл бұрын

Hey Matt what sort of flight time vs the drift would you expect thanks

@pierstaylor7780 3 жыл бұрын

Thank you. Would someone have suggestions please? I’ve noticed a split occurring on the flap (the thin line) where It meets the main wing. How would I go about repair/ strengthen it?

@warmiceUT 4 жыл бұрын

Nice video and informative 👍 By the way, I just received my Dart250g and maiden lady Sunday,flew it with 3S 1000mah lipo, in manual mode, without the Kopilot. What I found to that, it is very sensitive, and influence by some level of winds condition; competitively it much difficult to handle than my old Z84 with similar setup; may I have your comment? Question about Dart250g would like to seek for your professional opinion: 1) The CG spot is it in front of the CG point, behind the CG point, or on-top of the CG point? 2) If the CG is right, does it need come level of reflection? Like about 2-3mm? Why I am asking these, is because during the maiden, I need holding the the elevator up about 10-15% on the Tx stick, whenever I speed up, else it will immediately nose down and hit to the ground quickly. Very much appreciate your kind advice. Thank you.

@FasterThanJesus666 3 жыл бұрын

Can anyone tell me what is that interference at 15:25 where the screen flickers to black instead of going to static. I had a similar issue in my goggles a few weeks ago and couldn't find the source.

@heyjackfpv5469 4 жыл бұрын

cant wait for the premier , one question: where can i buy that vtx and antenna? please

@RagTheNutsOff 4 жыл бұрын

Hey Jack, that's definitely not the Matek 1.3 vTx and the antenna, I got that with some tx's from surveillezone. I have heard it called a VRX antenna, that's all I know. Matt

@martinmacko7297 3 жыл бұрын

Hi, how did u solve vtx power requirements of F411 running on 2S LiIon? F411 needs min 6V to run and my RUSH Vtx needs 7V-36V. Many thanks!

@pokerchannel6991 2 жыл бұрын

Hi: when we talk about long range fvp, there is actually two things that have to be long range, right? ie the vtx has to be long range, and then the control inputs transmission and receiving has to be long range as well, right [ie crossfire/TBS/ELRS]?

@northernfpv9562 4 жыл бұрын

Nice job you've done with this one! Hope it's not too heavy!

@RagTheNutsOff 4 жыл бұрын

Howdy fella, oh it flies brilliantly. Honestly amazed how well it flies on 2S for the speed it does too. Matt

@northernfpv9562 4 жыл бұрын

@@RagTheNutsOff no no no sir. This thing comes alive only on 3s. Night and day, truly.

@rizen3467 3 жыл бұрын

do you think this can handle a 4000mah li ion?

@clayquarles8650 3 жыл бұрын

Thanks Matt. Got one on your link.. buying 18650's.. should i go for the 3000mahs with 10A discharge or the 3500's with the 5A discharge? Thanks in advance for your expertise, and help.. Without you, Lee, and Andrew, I would probably still be grounded.. So good to fly! Thanks!

@RagTheNutsOff 3 жыл бұрын

Howdy Clay, it depends on your needs. If in doubt, go for the 10A ones. More head room for larger models. For me the Darty250g and Drift only pull 3A on a good day, so a 5A max is fine as it will have a burst of around 6A on launch and thats it. However in a mini talon, yea 10A might not be enough and you would probably double up anyway to make a 2P pack anyway. Matt

@FPVUniversity 4 жыл бұрын

Nit: it's INAV not iNav

@jannesbosma9801 4 жыл бұрын

I like iNav. Why is it INav?

@DeeJayEll 4 жыл бұрын

I thought it was 👀Nav. 😉

@jannesbosma9801 4 жыл бұрын

@@DeeJayEll I thought it was Apple.

@zatbr1 4 жыл бұрын

Well. I suppose Pawel can call it wat ever he wants. 🤷🏼‍♂️ Just as you can call your baby almost wat ever you want. 😁

@jannesbosma9801 4 жыл бұрын

@@zatbr1 My Dart is an iCatcher, not an ICatcher or ICATCHER and definitely not an apple or baby!

@pokerchannel6991 2 жыл бұрын

Hi: I am learning fpv. I was an RC flyer 20 years ago. So, back then, we used PMW or PWM receivers from airtronics or specktrum. Is that the reason that you use tbs or crossfire or ELRS instead? Ie: pwm only gets like 1 or 2 km max. So, if I buy a Zorro from Radiomaster, I should not try to get a pmw receiver, right? I should go for something like a module of some sort, right?

@chriswayman7240 4 жыл бұрын

Pretty excited to see this. Mine is being delivered today. Gonna set it next to my dart xl when it is done then wait for a nice say to maiden them both lol. I had alot of trouble getting the smart audio to work with my akk and inav so I switched it to a tbs unify pro on the xl. Not sure what I'll use on the 250

@FpvBerget 4 жыл бұрын

Lol u switched to tbs unify just because of smart audio?... U will be disappointed when not going for akk vtx.

@chriswayman7240 4 жыл бұрын

FpvBerget it was an easy swap. If I decide I need more range I'll throw the akk back in. But for early setup and troubleshooting I wanted the option to turn down the power. Considering switching to 2.4 but in reality there aren't alot of places that are good for long range around me so I end up not really pushing the limits of my vtx anyway

@RagTheNutsOff 4 жыл бұрын

Morning lads, I'll let you into a secret, I've never used smart audio! Matt

@chriswayman7240 4 жыл бұрын

RagTheNutsOff this will be the first time I've used it. It's not a deal breaker if I can't but I already had the vtx laying around so I figured I would give it a go.

@andrewjamez 4 жыл бұрын

Hi Matt, you mentioned your video tx is 1.2ghz but you have listed 5.8ghz gear in your description. Could you tell us what your1.2ghz gear is inc what antenna you use on your goggles etc.. Thanks.

@RagTheNutsOff 4 жыл бұрын

Howdy, see the description it is in there. As for antenna, just dipoles. Matt

@k6lsn 4 жыл бұрын

Have you tried spinning the rudders to opposite sides? Saw a couple folks do it with results that varied..

@RagTheNutsOff 4 жыл бұрын

Howdy, I've not. It flies fine as is so I'm loathed to tweak it. Matt

@horsship 4 жыл бұрын

Between this and the nano-drak, can you get the same efficiency and flight times?

@RagTheNutsOff 4 жыл бұрын

Morning, I have a nano drak prototype, no idea on its efficiency though. The Dart 250g is 70mah/km or less (recently just 30, but that was with a massive tail wind). Matt

@michaelsanderssa 3 жыл бұрын

Quick question. Running a 2s 18650. The VTX needs a minimum of 7v. Is there a risk running 2s and dropping below the recommended voltage?

@RagTheNutsOff 3 жыл бұрын

Easy, test it. Mine works down to 5.0V and at that voltage I have other issues ;)

@michaelsanderssa 3 жыл бұрын

@@RagTheNutsOff Thank you so much for the reply. Will do.

@papamidnightfpv 2 жыл бұрын

;-}> auto launch is what I'm hoping will help me learn to fly. I get the SIM but I never get passed takeoff usually

@flyingdream777 4 жыл бұрын

So the next question that arrises is “Dart250 or Nano Goblin ? “ opinions please lads ...

@RagTheNutsOff 4 жыл бұрын

That's easy. One is crazy expenses and one is not! Matt

@FraggsUK 4 жыл бұрын

So Matt, the Drift or the Dart? I cant have both unfortunately , flown mostly gliders and the odd wing up untill now, not super experienced but not a total novice either, which would you recommend? 🙂👍

@RagTheNutsOff 4 жыл бұрын

Howdy Fraggs, oh the Drift. The dart is great fun, but it can be twitchy without a flight controller, the Drift, much more laid back. Does that make sense? Matt

@FraggsUK 4 жыл бұрын

@@RagTheNutsOff Yeah makes perfect sense , I will definitely be fitting a flight controller (its worth it just for rth ) Just need to find a decent priced Drift in stock now 👍 Thanks for the advice

@yawnastyfpv6942 3 жыл бұрын

What is allowing your FPV view to appear like a true flight screen?

@caymanhilldesigns453 3 жыл бұрын

iNav OSD "on screen display".

@sleepingbearffg5008 3 жыл бұрын

💪💪👊👊

@zatbr1 4 жыл бұрын

Planning to weld a Li-ion pack for my G2 Ranger, have you done this before. And do I need 3s 1p or 3s 2p? Just wondering. Suffolk is bit windy @ the mo. So it's fixing/building weather. 👍🏻

@chriswayman7240 4 жыл бұрын

zatbr1 from what I understand it really depends on how many amps you pull on cruise and takeoff

@zatbr1 4 жыл бұрын

@@chriswayman7240 I was more concerned with weight and CG. The cells I have are 20A so even a 3s 1P will be enough. I guess I will just make it and see🤷🏼‍♂️

@RagTheNutsOff 4 жыл бұрын

Yes, I have other videos on making li-on packs. Its dead easy. As for 1P or 2P, 2P is twice the capcity, IF the model can take it. If it can take more, consider 3P! Also it may be easier to go to 4S 2P for more power over 3S setup. Matt

@RagTheNutsOff 4 жыл бұрын

And max amps is a consideration, I'd not worry about it if it's just for 20 seconds at launch, normal cruise throttle to 75% is the area to be concerned about for current draw

@zatbr1 4 жыл бұрын

@@RagTheNutsOff thanx Mat. I repack power tool batteries so building the pack is easy. I did not consider the 4s yet. It all sounds good and I shall give it a go as soon as I can confirm that my esc and motor can handle it. Thus is going to be a interesting experiment. ( 3s 1p then 3s 2p then 4s 1p and depending on CG 4s 2p) thanx for the input. I shall get building and looks like summer is here for 3 days this week perhaps even make a comparison video on my Ranger G2 👍🏻

@kool-k-kel 4 жыл бұрын

Howdy Matt, great channel. Will this build hit under 250g? Cheers fella..

@kool-k-kel 4 жыл бұрын

@MAD GRUMPYMAN equipment dependant. But thx anway..

@kool-k-kel 4 жыл бұрын

@MAD GRUMPYMAN no worries fella, I have one myself. Looking forward to watching Matt's vid. I was having issues with power on small triblade prop on 3s, swapped to bigger included prop, better! Would like to try 2s li on and stay under 250. 👍

@kool-k-kel 4 жыл бұрын

@MAD GRUMPYMAN I agree, especially on the jump up to 25kg. We have something similar, I'm still unclear. UK btw