Bafang motors have been changing what the customers can do to their programing. More motor manfacturing companies are doing this, One problem it solves motors heat up. also bearings wearing out to soon.

The bolts that hold the rack to the van. The bolts are rectangle and they go in at 12 oclock and with a quarter turn lock in place.

@frederickv.9300 I meant the screw on the plastic arm at the front does it stay in the liner or do you break it of ,sorry if I seam thick

You just leave it in place. @@anthonyworthington6495

@@frederickv.9300 thanks,have a good day🙏

I’d love to know I’m about to replicate this video

Just came in from, giving the van a wash. and gave me a chance to get a good look at the panels One year and nothing has moved. Everything looks exactly as when I installed the panels on the roof. Where the panels are level with the rails. No one even notices I have solar panels. I usually have to tell someone before they know.

I applied Silicone to all the anchor points and no leaks down into the interior.

I did the electric 12v system in the winter. Cost of the 12v system was 1200 to 1500 dollars. In the spring, I started the build and finished in the fall. I spent my time mainly waiting for parts and pieces for the build and another 1500 dollars for the rest of the build.

roof rack used? great video on awning. i have awning but cant find roofrack for transit connect :)

Did you watch the video? I have a headliner too. The video works around that.

Sorry not sure

One person can easily set it up and take it down. Fast.

Where would I be able to purchase this ?

Never had a problem get the caps in but had to undo one whole side to caulk the connectors. Then they where a problem removing them. I burred the caps up doing that.

Try to use a heat gun to soften the cap. Should make the cap more flexible.

Yes , BigBattery has SB-175 Anderson connector cables available to run these in series.

Try pressing plus and minus button at the same time. You can always google your display for info.

No cover. It was wasted place. My bed goes in front of that door. So I rarely use that door.

I did a video on this system in my van now. Not greatly detailed but does show this system in my van. kzfaq.info/get/bejne/m8Cgopmaz8C2oIU.html

At that time, I was only using the power station for emergency power at my house, like I said in the video. Which I only had to use once this past winter. I had a 110v 20amp charger to charge it up. I have the power station in my mini-van now and using a solar controller with a couple of 120 watt portable panels to charge it. A lot of people are buying the Jackerys and the other portable power stations,. just showing a different option.

10-1/4"x 9/16" Manufacturer ‏ : ‎ Hiwinn ..... www.amazon.com/dp/B08TQL3G87?psc=1&ref=ppx_yo2_dt_b_product_details

Try 8306 but you can checkout kzfaq.info/get/bejne/aLeVm9yI2rramKc.html ... for more you can reach out to magnum bikes support team with the exact bike model and year purchased [email protected]

This video shows that some companies will limit the speed in the Display and sometimes that is easy to change in the Advance Settings. Every company's display is different I have seen cutting the limiter wire work on a hub motor but will not work on a Mid drive motor . THE ONLY WAY IS NEVER .... THE ONLY WAY.

Sorry that is not available.

@@frederickv.9300 thank you.

Download the manual (free) ismacs.net/newhome/new-home-sewing-machine-manuals.html Servicing-See the complete Sewing book by Jack Miller and Bill Boltin. There are about 15 pages specific to New Home and Free Westinghouse ALB models.

Wilson Camp across the tracks and behind old Logan East End JR. High. Where Pride Is now.

I was not using the internal battery. I did get water there, turned it upside and drained it. Took the leaf blower to the bike. Cleaned the chain and lube. Bafang motors are rated IP65, which means they’re heavily water-resistant Three days later took the bike on a 78 mile 3 day trip. No problems

that was a quick splash,you could blaze through that much water full power,just dry the bike with a towel or something when your done and dont make a habit of it,any water in the motor is bad.

Only used this system once this winter for emergency power at my house. I had a 110v 20amp charger to charge it up. I have the power station in my van now. I will connect it up to a 300 watt solar panel. Now I just finishing up the wiring.

@@frederickv.9300 im about to connect mine this week! I have a bit bigger setup, with a 3000 watt inverter. Can you share some pictures with me of it laid out in van? Bus bars-charge controller-inverter

Using the same batteries, 2-170 big battery batteries

@@hmdmachineHall Put pic on your post on DIY RV Solar Systems FB group

Worked with Rick at Elkins and Logan. Quite a character.

🇨🇦 Kelly God Bless, it’s A Wonderful Experience to have your Family history being in joyed by others?

Glad you think so!

All of the solar connections are in the van. That red knob is a on and off switch. Just have to connect Solar controller to the positive and negative buss bars. This winter I am using a AC charger for the batteries when needed. Already had one power outage where I got to use the power station.

@@frederickv.9300 Sounds good this looks like something I would really use, thanks for the info.

This video shows what is possible, inside the some displays. Every display is a little different, so the buttons to push will probably be different.

From the solar controller first two wires goes solar panels and next two wires, positive to 50 amp breaker and then to positive bus bar and negative wire to negative bus bar.

Thank You! @@frederickv.9300