I ordered it through Toucan Hobby on Amazon and I'm sure all taxes etc were included in the price, I didn't have to pay anything else after ordering.
@barryfenwick609Ай бұрын
can I ask you if you had to pay import duties or VAT on the 1/14 RC HYDRAULIC WHEEL LOADER how easy was it to by?
@barryfenwick609Ай бұрын
any problems yet?
@GP-RCАй бұрын
I haven't encountered any yet. Happy with it so far.
@barryfenwick609Ай бұрын
@@GP-RC Can I ask where you got it and did you have to pay import duty or VAT?
@GP-RCАй бұрын
TOUCAN RC HOBBY Mt Model Hydraulic Fork for 1/14 Wa480 Remote Control Loader Accessories (Black-Yellow(with Battery and Charger)) amzn.eu/d/gQ9iE9k
@GP-RCАй бұрын
I ordered it through Toucan Hobby on Amazon and I'm sure all taxes etc were included in the price, I didn't have to pay anything else after ordering.
@barryfenwick609Ай бұрын
@@GP-RC thank you
@petevannuys56422 ай бұрын
How do replace front upper hydraulic telescopic rod ?
@GP-RC2 ай бұрын
I haven't delved that far into it, but it looks like you would have to strip down the front end which is something I haven't done. Sorry I'm not much help on this but there should be strip down videos out there.
@petevannuys56422 ай бұрын
The servos is not rotating in other ways but rotating one way only ?
@GP-RC2 ай бұрын
I found a stripdown video which will help you get the part out, I hope it helps. kzfaq.info/get/bejne/nrZ7lsxknuCUd6c.htmlsi=lEc0dEfRHk-PlFIZ
@petevannuys56422 ай бұрын
@@GP-RC not found any upper hydraulic system in shopping platforms !
Where did u get the operator for the front loader and how did u put him in there? Nice video
@GP-RC6 ай бұрын
Hi, the figure is from Bruder, they have a wide selection of 1/16 scale figures. Just search "Bruder Figures" and you should get plenty of results. To get the figure inside, you have to take the top sections and the Cab off to get access.
@grantmuddiman59816 ай бұрын
They look good value nice little video
@kumarpuri77526 ай бұрын
Wow well done thanks for sharing
@markconnors32697 ай бұрын
Just got mine 👍🏻 Don’t suppose you have a build video of the straps
@GP-RC7 ай бұрын
Sorry Mark, mine came assembled.
@markconnors32697 ай бұрын
@@GP-RC thanks mate found a video bit fiddly but getting there 🫣
@markbarnett44357 ай бұрын
Congratulations on your first hydraulic machine 👏 , something to be proud of there mate. Cheers 🍻
@markbarnett44357 ай бұрын
Congrats 👏
@nafex37408 ай бұрын
Nice one buddy 👍
@jims19958 ай бұрын
So glad I ran across this video I had just purchased this TR 212 top race truck knowing what its capabilities was because I had bought it one time before and gave it to my grandson for her birthday. How about the second tr212 to try to upgrade and just received it yesterday it just so happens that I also had recently purchased the very same inexpensive transporter that you are using in the video to upgrade this made for pavement only truck. Like you said if a person wants a decent RC vehicle you have to do what you can and use your imagination sometimes to upgrade and at least get proportional controls thanks for the idea great video
@rc-diy78649 ай бұрын
Wow, good job 👍
@shukrishafie30629 ай бұрын
hi,where i can buy tyre like you?tyre upgrade 1583
@GP-RC9 ай бұрын
Hi, I've just checked and the company that I got mine from no longer stocks them. I'm unaware of where else you could get some.
@rcscalecrawlerdenisan980610 ай бұрын
Bonjour ou avez trouvé l adaptateur rapide pour le seau ? Bonne journée
@GP-RC10 ай бұрын
Hi, I got it from AliExpress. Just found this amazing item on AliExpress. Check it out! £12.00 75%OFF | Huina 1583 Loader Quick Hitch Connector Bucket Changer Full Metal For 583 Wheel Loader a.aliexpress.com/_EHfMKO3
@StreetPete10 ай бұрын
Is there a forum anywhere where i can discuss huina kit? I've just bought an excavator and have a few questions.
@GP-RC10 ай бұрын
One of the better places is on facebook, these guys modify huina equipment all the time. facebook.com/profile.php?id=100071708044958
@rcplaytime10 ай бұрын
thats fricking awesome 👌 love it mate 👍
@rcplaytime10 ай бұрын
flipping heck mate thats super cool 😎 wow 👍👍
@The-Warm-voice135911 ай бұрын
Turn it on the pump but slow no need more He will give you more power keep the mix button on with pump running
@GP-RC11 ай бұрын
Thanks for that, my first time with a hydraulic machine, will take me a little while to get used to it. All advice welcomed 👍
@The-Warm-voice135911 ай бұрын
@@GP-RC 🤣🤣 yeah i feel that 2 ..my first time with Hydro that was in 2019 with my monster JDM Earth mover 870k i was happy in same time i didn't have enough experience How to make pump on demand And How to open the pressure for more power But i learned that 2 years later 🤣🤣🤣
@The-Warm-voice135911 ай бұрын
Congrats bud its beautiful komat`su wa480 loader from Toucan Hobby excellent choose 👍😊 so no issuse or leak or glitch from the Hydro pump
@GP-RC11 ай бұрын
I've had no issues so far, I hope that continues 🙂.
@The-Warm-voice135911 ай бұрын
@@GP-RC yeah👍.. my friend have one its cool no problems with it do not worry when you buy from Toucan Hobby Oliver he have great Goods ..Anyway Good luck with your big guy i wish i see more videos for him ...Cheers🍺
@CLAUDIOSRC952911 ай бұрын
@rickiejones922911 ай бұрын
The middle bar for tilting the bucket, where did you get it, and how much longer is it compared to the original one?
@GP-RC11 ай бұрын
Hi Rickie, It's from Magom. It's about 7mm longer but makes a big difference. magomhrc.com/en/catalogue/1860-cylinder-clamping-kit-huina-583-arm.html
@bangsiagian_id Жыл бұрын
Hi, how install beacon light in huina 1573...?
@GP-RC Жыл бұрын
I have taken out all stock electronics and replaced with hobby grade. Using a 6 channel flysky radio and receiver my beacon is plugged directly into channel 6.
@bangsiagian_id Жыл бұрын
@@GP-RC thanks for information friend 🙏
@CLAUDIOSRC9529 Жыл бұрын
nice
@rcconstructionmoorey4142 Жыл бұрын
Nice work mate , new Australian subscriber 🇦🇺
@fietchialastri4075 Жыл бұрын
Nice job
@jock_thedefender Жыл бұрын
Love hearing a fellow scot in the hobby!
@jordijagamen8068 Жыл бұрын
What is the price and possibility of delivery to Belgium
@GP-RC Жыл бұрын
Hi, you will have to ask the company that question sorry, I have no affiliation with them. Search for Astec Models on facebook.
@TeriWilde Жыл бұрын
they look spot on!!
@Daytonafox1 Жыл бұрын
These look ace. How long are they please?
@GP-RC Жыл бұрын
Hi Mark, the length of the strap part is 37cm or 14½ inches and the ratchet part is 6.5cm or 2½ inches.
@GP-RC Жыл бұрын
The ratchet measurement is when it's fully open and layed flat, hope that helps.
@Daytonafox1 Жыл бұрын
@@GP-RC Thank you very much for reply. That's very helpful
@rickiejones922911 ай бұрын
Glad you posted, I’ll be buying those soon enough.
@thqp Жыл бұрын
Thank you for this comparison. I was looking at buying tamiya 14 scale wheels for my truck, while measuring realized that the HUINA's tire's are far FAR smaller than the tamiya tires. I think the Huina is closer to 1:16 or maybe even 1:18 scale,
@GP-RC Жыл бұрын
Hi, thanks for watching, glad it was of some use to you 👍
@danimccarron8413 Жыл бұрын
Cheers
@GP-RC Жыл бұрын
Not sure where you're from but Amazon uk have the hooks. Dilwe RC Car Trailer Buckle,RC Trailer Metal Towing Buckle RC Tow Hooks D Shackles Upgrade Parts for 1/10 RC Crawler(Black) amzn.eu/d/ijSNCyM
@thatsmyrc Жыл бұрын
Nice mods mate like the tires everything is a nice improvement over stock
@danimccarron8413 Жыл бұрын
Where did you get hooks for the bucket
@thatsmyrc Жыл бұрын
Wuehbox sells them
@GP-RC Жыл бұрын
I think I got those from aliexpress, they are 1/10 scale.
@GP-RC Жыл бұрын
I think I got those from aliexpress, they are 1/10 scale.
@PouPhal Жыл бұрын
Hoina 1583 Model how much Sir?
@nicolasberthon1788 Жыл бұрын
Bonsoir. Very good the modifications 👍😉. Nicolas from France
@lorrainedimmock40962 жыл бұрын
Nice mods, there is a replacement mother board by Wuhlbox, Germany, which will give you full proportional control, at around £40, bringing it into hobby grade, from toy grade....using your existing transmitter..
@GP-RC2 жыл бұрын
Thanks Lorraine, Funny you should say that, I've just fitted the v4 board from Wuhlbox, it does make a massive difference 👍
@CLAUDIOSRC95292 жыл бұрын
💯💯💯 magnifik truck my dear friend
@rcplaytime2 жыл бұрын
Like what you done with it,i need to do something about the steering speed on mine,its painfully slow👍😀subscribed 😀👍👍
@CLAUDIOSRC95292 жыл бұрын
and i have a 3d printer and i don't know how to work with it because i'm just an old donkey and old don't learn lol
@CLAUDIOSRC95292 жыл бұрын
cool
@CLAUDIOSRC95292 жыл бұрын
cool
@CLAUDIOSRC95292 жыл бұрын
kzfaq.infoUgkxQoR2vD8Gn1AQpKyY0R4LfmGW8XQ_hz1-
@CLAUDIOSRC95292 жыл бұрын
nice modification
@jgminiaturas83192 жыл бұрын
Brasil🚜👏👏
@ulisesabundez93992 жыл бұрын
Hi, nice video, I like it, I have 2 dump trucks Huina and I’m thinking to modify them, question, are you using the same control and receiver?
@GP-RC2 жыл бұрын
Thank you, I'm using a Flysky FS-GT5 transmitter & receiver, 6 channel.
@kafinah63592 жыл бұрын
👍👍👍
@gabrielpichardo14922 жыл бұрын
If you drop the mounting point level to right below the wpl chassis rails the lifting capacity should increase tenfold. The steeper your mounting angle 📐 the more lifting power you get. Tye best case scenario would be bracing the steel chassis right behind the cab and mount the base there and the top of the piston hooked right to the front of the dump body that would be a perfect 90* degrees angle , that would be 100% lifting capacity from the cylinder