No video
WPL C24-1. RES V3 sound kit.
Рет қаралды 2,958
Күн бұрынFitting the wpl res v3 sound kit to the C24-1. For some reason once fitted, the sound cuts out when increasing speed. I haven't discovered why yet.
☆☆One mistake I made talking about the control board was the Extra Cable, I said it was for adding a winch etc. It's actually for adding an external ESC, sorry for the incorrect info. The winch can be connected on the pins next to the steering servo connection on the board.☆☆
@CLAUDIOSRC9529 2 жыл бұрын
💯💯💯 magnifik truck my dear friend
@jgc0064 3 жыл бұрын
You have to add a104 hz diode between a and b on the motor and another 104 between positive or neg to the case of the motor. It’s getting interference. Also route the speaker away from any power wire/source. Hope this helps!
@syahmihobby8963 3 жыл бұрын
My sound speaker always problem.. how about yours?
@GP-RC 3 жыл бұрын
I'm waiting on a replacement res v3 board coming from wpl. I will post an update when it arrives, hopefully it will be ok.
@jgc0064 3 жыл бұрын
My speaker has been bad too since brand new from WPL and I have the 104 ohm resistor on the motor and it still cuts out and sounds horrible.
@rosidahabuchik8786 3 жыл бұрын
Hey...what version are you using
@rosidahabuchik8786 3 жыл бұрын
Petrol...or ..diesel,
@GP-RC 3 жыл бұрын
Hi, I'm using the petrol version.
@rosidahabuchik8786 3 жыл бұрын
@@GP-RC Ok thank you vmuch
Rc remote control adventure
Рет қаралды 15 М.
RC Models and Mods
Рет қаралды 14 М.
TopRC | Мастерская радиоуправляемых моделей
Рет қаралды 12 М.
The Higher You Crawl, The Further You'll Fall
Рет қаралды 18 М.
TopRC | Мастерская радиоуправляемых моделей
Рет қаралды 19 М.
EdwardRC Car
Рет қаралды 58 М.