Thanks for the video. 8:41 My 100 year old (WWII) neighbor passed away earlier this year. His son gave me his Electro 12 that was outside and hasn't run in years. His has the hydraulic lift. It's in pretty rough shape, but the engine is free. The "electro" means solid state ignition? It has a "modern" looking coil on it. I'm going to look into the engine oil (I didn't see a dipstick) and hydro ATF level before cleaning the carb, working on starting it. The 12v + starter leads to directly to the key switch, i'd like to install a solenoid.

Damn jody sold da MN n thing

Where can you get the bottom plug for the tank

Inherited one it's a 63 teacher style tires size 6 12

Obviously you didn't fix it because you cut the video so who fixed it for you cause you didn't

you stupid that motor sounds like crap

Your video sucks

Awesome tractor! Looks incredible.

Awsome

followed your video to take apart an old Brute I got for free. Worked perfectly on that one too. Thanks

Helpful video. I used a NICE 1635 bearing .75 id x 1.75 of x .5" on an Ariens 924028. I've seen some parts say 1.625 OD but I believe that is incorrect

What is the gear assembly and where did you get it

They didn’t make a 62, 1963 was first yr

I just picked up a Wheel Horse 502 missing the engine and steering components. The transmission, all the metal shields, hood, fenders, seat, etc are there, but no engine or steering linkage. I was able to find some steering linkage parts on e-bay. Planning on putting one of those little single cylinder diesel engines on mine... What is the diameter of the steering wheel? I'm looking for an aftermarket wheel and wondering what the stock steering wheel diameter was...

17:12 I didn’t look thru all the comments, but at the noted time, when you released the auger lever it took quite a bit of time to stop spinning. Ideal time is less than 2 seconds. There is an auger brake in there and a procedure in the manual for adjusting the auger linkage/brake system to both provide both good activation and stoppage when the lever is released, if you’re interested.

Great video, I actually have the 69 wheel horse charger 12 with the wood grain. My dad got it when I was about 8 years old.

Do you have a model number

I really appreciate this video. It really help me out on my Cub Cadet 127 with the stuck relief valves. I’m back in business now thank you. 😊

I love mine my dad got me it and I rip it across the hills and it’s so fun!

Hey i got a question for you do you still have that tractor and if you do what's the serial number? I currently own the 10th T10 built and am trying to see if I can see if I can find the 11th one or 9th one or possibly how many were made.

Also known as GT52lxsi

I've got a really ugly Toro 2-cycle Commercial Mower. It was used by a Landscaping Company for 20 years. It was given to me as the Lady that owned it, left it outside for years. I got it running good but the metal gas tank is just full of rust. Someone took the Model number tag off so I have no idea what model I have?

You still have the 4514? I just picked one up today.

Hi do you still own this tractor? I was watching your video and at 3:15 into the video it shows the engine with two lines. The lower one is the gas line and other is a line above it connects to the air intake and goes around the back of the engine and down into the frame and goes somewhere. Do you know where this vacuum line actually goes? Mine fell off and I have no idea where it actually goes or potentially connect to. Any help would be greatly appreciated . !!!!!!!!!!

Nooty nooty you said shit !

Where can I get suspension parts

The thing I like most about that Ariens design is it's easy to modify a generic pulley to fit there and you can have an overdrive with very little work. :) I put a 50% overdrive on my old blower and it really threw the snow after that, lol.

i went from a polaris 700 to this. and im happy

I have an Arien and they are GARBAGE

Nice 446,got to love the Case Ingersolls!

Good to see a new vid from Titliest07!

Nice looking mower. Do you still have it? I just landed my own 420 but needs a little TLC. Where can I find a mower deck for it, and what should I expect to pay for one?

I have a Simplicity snow blower. It uses a plastic transmission. I would not purchase a Simplicity. I would purchase a Honda snowblower.

I learned, 50 years ago to steam clean any project before bringing it into the garage.

I wish they still made the shoots like this I have a newer 824. I like the older style better

who made the sears tractors?

The width is kind of an oddball thing on the 1390 Simplicity. The naming convention is normally horsepower then width; the 1060 is 10hp and 60cm wide (24 inches), the 1170 is 11hp and 70cm wide (28 inches), the 1280 is 12hp and 80cm wide (32 inches), but the 1390 is 13hp and 97cm wide (38~39 inches). Either way, it's pretty wide. I think they went back to inches on the next revision.

I should have purchased a simplicity regent over a john deere s100

This guy is either a moron or he has never used a snowblower before

👍👍👍

My Friend Butch Soriano Also Has The Same Chainsaw The Montgomery Wards 10 Inch To Go With The Mccullough Mini Mac 110 10 Inch Chainsaw His Mini Mac 110 The Bar Was Very Very Brown And Very Rusty Very Smokey. He Used The Montgomery Wards 10 Inch Chainsaw To Cut Big Logs For Firewood. Cut Down Some Trees And Even All The Way Down To The Stump. His Montgomery Wards 10 Inch Gas Chainsaw The Bar Was Also Very Very Brown And Very Rusty And Very Hard To Start Up And It Also Smokes A Lot Of 2-Stroke Blue Smoke Just Like The Mccullouch Mini Mac 110 10 Inch Gas Chainsaw.

Anybody out there that can teii me where i can get a pully for a ST724 drive pull on the auger

What does the truck side wiring look like? I have an older fisher plow and the solenoid clicks but the plow doesn’t move. It was working fine the just quit

I just bought a fixer upper ms360 for 50$ and it fires up and runs !

My dad has the same john deere only the headlights are diffrent they don't have the orange. He took the sides off because it had a temp problem with them on and right now it has a bad starter.

Just love to see these still alive. It is only a 10 and not a 12, but still amazing.

Tell me what is the diameter of a large pulley?

North shore snowblower king

Nice find. I was laughing at your comment(now I remember why I stopped doing KZfaq) as the bracket dropped. I felt the same way. Been working on a bunch of thees Tecumseh engines. I have good luck with the 15$ eBay carbs. Seems like almost everyone I’ve worked on these days has needed valve jobs. Exhaust valves just take a hammering.

Do you know what the capacity of the loader is rated for?