Hello! Do you know the weight of roof, trunk and hydraulic system of them?
@js-ce1zu20 сағат бұрын
Can’t find it using the link in description
@poncoolrideКүн бұрын
was looking at a complete AMG 32 engine with supercharger. I'd like to install in my 01 slk 320. It's a 6 speed manual. Will it bolt in with the flywheel and clutch assembly from my 320? l'm guessing I might be better off ditching the idea of using the stock ECU and going with a Holley terminator x or something similar? Love these videos ! Keep them coming! Thanks
@NelsonEnzo2 күн бұрын
Did you sell ir? Did you make money?
@Nd_722 күн бұрын
yes and yes
@NelsonEnzo2 күн бұрын
@@Nd_72 you should consider a video with information, that would be interesting.
@tooththrhr3 күн бұрын
You can literally add two more cylinders and make it a v10, just with windows xp
@donovanshroyer5 күн бұрын
Looking good man happy you got the no boost issue fixed, excited to see what’s next
@uzzle215 күн бұрын
Can you help with V tech tune? So i ordered the galleto cable. gonna install all the parts then flash it over. He sent me a file over
@Nd_723 күн бұрын
I give some info on the video I posted 2 days ago
@xxkai45xx485 күн бұрын
can you send ebay links or let me know what to look up to get my hands on a star diag system with developer mode ?!
@Nd_725 күн бұрын
I can try and find one
@xxkai45xx485 күн бұрын
@@Nd_72 Please do man even if you could just guide me as to what to search again when i try to search for mercedes star all i get is like four thousand dollar systems i cant find any for cheap and i cant find any old ones on the dell laptops
@xxkai45xx485 күн бұрын
i personally would be very grateful to you ive been a longtime subscriber and always like and comment your videos as well and share them with a few friends of mine !!!
@xxkai45xx483 күн бұрын
@@Nd_72 heck even if i bought yours off you i wouldnt mind !
@sumbochen25195 күн бұрын
Im going to delete it as well. If i ecu tune it out... do you think i can still pass smog test?
@Nd_725 күн бұрын
Not sure about smog test. We don’t have that by me
@zbolts13gaming446 күн бұрын
Could you explain how you installed the dowels a bit more in depth? I have a c32 AMG myself and I’m doing a clutch delete on my pulley very similar to yours very soon You mentioned building the pulley before install with the washer attached to the pulley. Do you put the dowels in the pulley first and leave a bit sticking out for the washer to fit on?
@Nd_725 күн бұрын
Yes they just drop in
@RealDougFields6 күн бұрын
This is more than a bit off script
@Nd_726 күн бұрын
lol and it is funnnnn
@kevingraham90546 күн бұрын
Thing art to fly.. how much it weigh?
@Nd_726 күн бұрын
2200 with me
@kevingraham90545 күн бұрын
@@Nd_72 😬 definitely going 9s 😂... Guy out here running 10s with one
@savostanivukovic98016 күн бұрын
It’s pretty pretty good 👍 So why SC clutch wasn’t engaging?
@Nd_726 күн бұрын
the harness had a few bad things. not sure what worked. but it did
@Kasi016 күн бұрын
Know where to look for the M112k?
@Nd_725 күн бұрын
U need a m112k motor.?
@Kasi015 күн бұрын
@@Nd_72I’m thinking about using one for my G320
@phil250516 күн бұрын
great👍
@Nd_726 күн бұрын
why thank you fans are what makes this all happen
@randumlystupid6 күн бұрын
I def enjoy watching these videos on the 320 I’m surprised more people don’t watch them, guess I’m seeing the early growth of the channel:)
@Nd_726 күн бұрын
Yes. I would like more views but it is what it is
@randumlystupid6 күн бұрын
@@Nd_72 people will come along, just keep doing what your doing I’m apart of it now👍🏻
@Kasi016 күн бұрын
Hey man, I love your channel. My G320’s engine blew up, and I’m looking to get myself another. The M112K seems pretty exciting, but I dont want to go too crazy. Whats the process of switching over to the supercharged version like?
@Nd_726 күн бұрын
So far not bad Very easy
@Kasi016 күн бұрын
@@Nd_72Sweet, what’ve you done? My main concern is the ECU/TCU, and getting everything to work in the G. Also, how much size does the supercharged add?
@Nd_726 күн бұрын
@@Kasi01 I made a full install on what is needed. Mainly ECU pulleys and a few other things
@Kasi016 күн бұрын
@@Nd_72Thanks!
@poncoolrideКүн бұрын
I was looking at a complete AMG 32 engine with supercharger. I'd like to install in my '01 slk 320. It's a 6 speed manual. Will it bolt in with the flywheel and clutch assembly from my 320? I'm guessing I might be better off ditching the idea of using the stock ECU and going with a Holley terminator x or something similar? Love these videos ! Keep them coming! Thanks
@TheYungwyld6 күн бұрын
How’d you get it to whine? Mine doesn’t whine.
@Nd_726 күн бұрын
No intake or hood lol lol
@fishingwithcritter6 күн бұрын
Going to need a cage soon
@Nd_726 күн бұрын
already talking and getting pricing
@fishingwithcritter6 күн бұрын
@@Nd_72 nice
@Nd_726 күн бұрын
@@fishingwithcritter owwww it will look cool
@JoshuaCrowder-w7q6 күн бұрын
You need the M112k ECU. swap over steering column module, EIS, ecu all together. You’ll also need a relay tapped into the body harness going into the ECU that’s also wired to your IC pump. The blower will not engage unless it sees that you have an IC pump and it is working. Just went through this when I kompressor swapped a 5.0 m113 wagon.
@Nd_726 күн бұрын
Already have the ECU and so and yesss the ic pump. Fixed it
@skater02846 күн бұрын
I always thought those superchargers only engaged if you really step on the gas. Otherwise they are not engaged. Just speaking out loud, I don’t really know.
@Nd_726 күн бұрын
yes they do and i was flooring it
@tobeybeckley7 күн бұрын
Hey ND, what scanner tool are you using to read codes thanks
@Nd_727 күн бұрын
star is the best
@tobeybeckley7 күн бұрын
@@Nd_72 do you have a link I can’t find it
@Nd_727 күн бұрын
@@tobeybeckley you need to look on eBay
@ilovetech7 күн бұрын
How can I get a hold of you
@Nd_727 күн бұрын
Instagram buffyclk500. why what do u need
@keeponcruisin78767 күн бұрын
I do. It's a yellow R170 SLK320 with a 6sp manual. It's great here in Florida. Why not put an external switch for magnets on the dash?
@Nd_727 күн бұрын
i want to get it running right or just go fixed pulley set up
@typ24867 күн бұрын
I vaguely remember hearing the TCU gives a signal to the ECU to engage the supercharger above idle.
@Nd_727 күн бұрын
will look into that
@dogkicker1007 күн бұрын
@@Nd_72 when mine wouldnt engage i put a new cam sensor was cheap enuff and another problem crossed off , and now it works fine the trans tcu isnt being used as i stuck a 6 speed manual in it also i cut the loom off as i didnt want the g/box plug hanging down in that area so i chopped it off sealed all the ends of many wires taped em all up
@donovanshroyer7 күн бұрын
Hey I’m in Kissimmee, my cousin wants to supercharge his c320 eventually, I would like to see the car and go for a ride when it’s all finished
@Nd_727 күн бұрын
We might be can do that then it is ready
@bobbysalinas48458 күн бұрын
My supercharger is doing almost the same thing it will not engage all the time, only when I'm in first gear, after its gone through the gears and I'm in 3rd or 4th and punch it, it will not engage. Very annoying
@Nd_727 күн бұрын
Do u have any mods or codes
@chrismessmer81827 күн бұрын
have you confirmed that your charge cooler pump is still working?
@Nd_727 күн бұрын
@@chrismessmer8182 yes I have
@chrismessmer81826 күн бұрын
@@Nd_72 my comment was to bobbysalinas4845 about his issue ....
@ml163548 күн бұрын
Скажите, вы протачивали уши на раме чтобы верхние рычаги наружу вышли?
@Nd_727 күн бұрын
no
@ml163547 күн бұрын
@@Nd_72 ну тогда у вас развал не правильный, нужно пропиливать чтобы диапазон регулировки верхних рычагов увеличить, иначе не выйдет выставить угол колёс
@michaeljorgensen44238 күн бұрын
How do you get to the hose attacked to the block?
@vastolordez84578 күн бұрын
Where did you get that custom supercharger name plate?
@Nd_727 күн бұрын
I have a guy who makes them If people want custom ones I can start getting them made. What do u want it to say
@EssentialMoneymaker8 күн бұрын
How do I get my lower control arm back on I seen u finished at the end but every time I put it back in place it goes on crooked and I can’t get the long bolt back in to tighten it down
@robertlambert52998 күн бұрын
Adam where did you get the badge?
@Nd_728 күн бұрын
custom made did u want one
@robertlambert52998 күн бұрын
@@Nd_72 it was interesting. Just wondered where you got it.
@thedoo7779 күн бұрын
Oh you don't have to do the pump until it's necessary
@Nd_728 күн бұрын
yes but you need to plug it up
@thedoo7779 күн бұрын
That is great More and more people are going to that More and more people are not afraid it works the only one I wouldn't recommend is the old man's mode if you want it the old man's mode I think you got to get go with the SL setup as opposed to coilovers most of us drive in a sport mode or the ABC mode That's just fine . I went to a suspension shop they charged me $659 , and I went with hiro coilovers, took it back to them once to have my height adjusted perfect
@thedoo7779 күн бұрын
Show us how to code it out
@Nd_728 күн бұрын
The video after shows how
@CLVannoy9 күн бұрын
I watched just to see you bud 10:00
@Nd_729 күн бұрын
why thank u
@xxkai45xx489 күн бұрын
hey adam how did you get ahold of that star diag system do you have devvelopper mode ? im looking at getting a system for my 2001 s55 and 2005 c55 amg but i cant find anything resonable i know your always getting good deals what kinda cables do you have for it ? any multiplexers
@Nd_729 күн бұрын
i got mine off ebay years ago
@Nd_728 күн бұрын
There is one for sale only 100
@xxkai45xx483 күн бұрын
@@Nd_72 please help me find one adam ! or at least give me keywords to look into it !
@nikogorniak42389 күн бұрын
Hi do you have to code it off after delete?
@Nd_729 күн бұрын
yes or get it done when u get a tune
@101skinnydipper9 күн бұрын
Your such a racer dude your living that 1320 life in “Mexico” lol
@Nd_729 күн бұрын
i will take that
@daworm389 күн бұрын
Time for a fixed pully
@Nd_729 күн бұрын
lol lo maybe I have a 70mm and a 65mm ready to go
@daworm389 күн бұрын
Lol then what are you waiting for.@@Nd_72
@DukeOfTwist10 күн бұрын
2nd & 3rd pass you where lined up way to the left out of the grove. I work at the drags and recently got a C32 love your content.
@Nd_7210 күн бұрын
Yes
@DukeOfTwist10 күн бұрын
@@Nd_72 I'll be doing twin turbos in the next few months
@Nd_729 күн бұрын
@@DukeOfTwist heck ya
@boosted30013 күн бұрын
hey, it's not the prettiest setup...but "form ever follows function"! I applaud you
@Nd_7212 күн бұрын
why thank you and it did work well
@jordanrivera424413 күн бұрын
You should use Velcro instead of double sided tape
@Unknownjuice814 күн бұрын
Can I do all the mods you got on this to my e 500
@Nd_7214 күн бұрын
yes
@Unknownjuice812 күн бұрын
@@Nd_72would u if u could find one for cheap get a w211 e500 and do the same stuff u did to the death cart and do it to a 5.0 na e500 and put it up against the e55 amg and see what it dose against a fully opened up m113 so like cat delete egr delete secondary airpump delete bigger throttle body and Nos with the setup to keep it from blowing and whatever I missed that u did to the death cart it’d be a lot of 5.0 m113 watches that’ll love to see what the mods and a tune can slowly do
@Nd_7210 күн бұрын
@@Unknownjuice8 maybe with a e500 4matic
@thetadaoness14 күн бұрын
I dont comment often, but i feel compelled to tell you that this is neither funny nor entertaining. I wish this had never come across my Shorts feed.
@Nd_7213 күн бұрын
lol
@SisuGirl14 күн бұрын
Men with too much time on their hands! 😂
@Nd_7214 күн бұрын
yes lol lol
@MrKearfull14 күн бұрын
I want that hood strut<3
@Nd_7214 күн бұрын
Ok make me a offer
@MrKearfull14 күн бұрын
@@Nd_72Does it fit c32?
@Nd_7214 күн бұрын
@@MrKearfull don’t think so
@MrKearfull14 күн бұрын
Hi love your videos. I got my self a 2001 C32 amg with 390.000km on it. Done a lot of worh with it and want to start preformence mod it soon. Do yo have a extra kit with a smaller kompressor pulley and a non slip belt kit or other m112k parts you want to sell to me? Greetings from North Norway . Keep doing what you're doing! I beleve you can make it big my man
@Nd_7214 күн бұрын
I might have a fixed 65mm pulley for sale
@michealcobia786915 күн бұрын
Did you blow him?
@lukeallen81115 күн бұрын
I had a silver ML55 and I did almost the exact same thing.