Replacing Supercharger Pulley Bearing On Mercedes SL55 AMG m113k

Рет қаралды 1,303

4 ай бұрын

In this video I replace my SL55 AMG superchargers pulley bearing. As you can see very easy job just need the tools.
24mm socker
www.amazon.com/Capri-Tools-Un...
Snap ring piler
www.amazon.com/Channellock-92...
Press
www.harborfreight.com/12-ton-...
Bearing
eBay
www.ebay.com/p/1327171449

Пікірлер: 21

@stevenlee92833 4 ай бұрын

Use the old bearing to press the new bearing in, when pressing in a bearing you want to press on the outside race which doesn't put any pressure on the bearings or cage (you're not missing balls from the bearing, the cage just melted and flung itself out) just trying to help as I've been a mechanic for over 20 years, I've seen people use a bfh and wood to do this job, you did much better 😀 nice car and nice dog, thanks for the video

@TheoCook 4 ай бұрын

Totally agree. I did this the other day with a press. I cut up my old bearing and only used the outer ring only to push it down. I used an angle grinder to cut it up. The outer ring has cuts in it so it comes out no problem afterwards.

@robertlambert5299 4 ай бұрын

When I installed my SC bearing. I pressed the old bearing out of the pulley. Then froze the new bearing in the freezer and heated the pulley in a toaster oven. The bearing literally fell into the pulley with no pushing of a press. Easiest install ever.

@OatesSteve 4 ай бұрын

Thanks for the info.

@Nd_72 4 ай бұрын

happy to help the main goal is getting more people working on the m113k and m112k. that way more people might mod them

@KG-hq2vt 3 ай бұрын

Great vid thanks. As others have said, pressing on the inner race could damage the new bearing

@robertosousa8150 4 ай бұрын

Good vid!

@Nd_72 4 ай бұрын

thank you sir

@pfoxhound 4 ай бұрын

Nice 💯

@pyric 4 ай бұрын

I gotta check my bearing my car started making a noise when the blower engages towards the end of the year.

@Nd_72 4 ай бұрын

let me know if it is your bearing

@65JTM 4 ай бұрын

Always good info Adam. Have you changed the SC oil in either the SLK32 or SL55?

@Nd_72 4 ай бұрын

yes on the c32 but I need to on the sl55 might do a video on it

@yolo-cars 4 ай бұрын

Thank you for this video! Please tell if you have to lubricate the bearing prior to pressing it into the pulley?

@Nd_72 4 ай бұрын

just a little

@yolo-cars 4 ай бұрын

@@Nd_72 Thank you. I wonder what liquid or grease is used to lubricate it? PS: cooling the bearing is a great tip!

@NY-pq4dr 4 ай бұрын

Unrelated question… I have an ‘06 SL55 (bone stock) and has that pesky ticking noise coming from the driver’s side. Since you have a ton of experience with these what would you suggest? I was going to try an engine flush and switch to amsoil 5w40.

@Nd_72 4 ай бұрын

is it from the purg valve or the Motor