Did you have to replace the rubber hanger bushings?
@xsquatchx25355 ай бұрын
Thanks for not showing how to do the wiring 👎🏻🤦🏻
@oskaraho6 ай бұрын
Old intake rev: 0:19 New intake rev: 1:06
@quadradoonline46639 ай бұрын
How have he done the wirering?
@zokusharuuku10919 ай бұрын
Hold up whats that wing lip on top of your wing?? That looks sick! Also I replaced the whole exhaust on my mini by disconnecting the header while i was doing the clutch and it took maybe 10 minutes to get the whole thing off.
@CaiPrice10 ай бұрын
I want your car
@florianmarx388511 ай бұрын
Is it legal in Germany?
@stephensheard438811 ай бұрын
Hi and thanks for these videos they have helped me as ive recently purchased the same car in black eyed purple do you still have the car, and did you keep the white wing mirror covers possibly? thanks
@MarkJohnMorris Жыл бұрын
How long did this take to change? Thinking about changing mine when I change the intercooler, thanks.
@joheewrx5278 Жыл бұрын
Where did you get those seats and pedals?
@BIGGESTSLIPKNOTFAN1 Жыл бұрын
Why did you remove the underside of the bonnet scoop?
@adrianwynne4236 Жыл бұрын
So do I 😂 they look awful!
@CheckeredPony Жыл бұрын
bro your steering wheel is on the wrong side XD
@minimanadam Жыл бұрын
Omg it's loud..I just got one for my aero mini.. it was between this and pacesetter. I had pacesetter one time before abd hated it's drone but loved it performance
@jorelbaker3261 Жыл бұрын
Nice vid thanks for posting. Im gonna look for a grill now and hopefully install mine before I do the headlights and the handles.
@EndlessXConcertgoers88 Жыл бұрын
any issues passing smog?
@owenasmr.m2743 Жыл бұрын
Cheers from america mate
@ericbg2358 Жыл бұрын
Which one is it? The catback race or de sport?
@allantetreault5312 Жыл бұрын
Very simple install! Thanks!
@osh241 Жыл бұрын
lol, this was me until I invested in an impact driver! Good stuff bro
@hugogonzalez39032 жыл бұрын
Was this catless?
@ironmantooltime2 жыл бұрын
Heh poster don't bother responding to the comments numnutts! 👍
@Nays332 жыл бұрын
How does your shift knob stay flush with your shift boot?
@joshuachristiansen26262 жыл бұрын
There are shift boot retainers you can buy. Like from grimmspeed
@TheRedgtv20002 жыл бұрын
Where you able to shot your bonnet without any restriction?
@charlesmurithi4132 жыл бұрын
hey bro got Subaru Impreza 2005,can it fit?
@joshuachristiansen26262 жыл бұрын
05-07 is pretty much the same car. id imagine itll fit. Just need to sort out the wiring
@MajinManGTZ2 жыл бұрын
@@joshuachristiansen2626 correction 2003-2007
@garrydean65442 жыл бұрын
Does this exhaust drone on the highway??
@RoSsMiLlEr082 жыл бұрын
yes, almost unbearable in my opinion
@BigArch65642 жыл бұрын
Cracking honest vlog buddy and thanks for sharing!
@richardsmith79402 жыл бұрын
I fit a set of these just yesterday. I used the flimsy little nuts off the original grill. They kind of cut there own thread on the locating dowel type plastic pin things
@bitlikethat2 жыл бұрын
Love how u didn’t buy the stereo first 😂 crack up as
@MACcER342 жыл бұрын
Thinking about doing the same
@jorrenvandergrift17903 жыл бұрын
So you can just screw them off the top one's? Because other yt pulled them off with a lot of pressure what made the bolts break. Do you put back the old bolts that you removed to make sure the new grill stays on?
@danisevandermeij8612 жыл бұрын
I have exactly the same question 🤔
@christianninsananda96262 жыл бұрын
They can all be unscrewed, but some need a little pressure (from a pry tool) to get started. And you need to save and screw them back on the new grille.
@bravoskyline3 жыл бұрын
Is 163 or 170 HP??
@NewtonInDaHouseYo3 жыл бұрын
Hey man, check out the R90 and R112 style wheels. They are perfect for the R53.
@japandrej2 жыл бұрын
haha nice comment, I actually have R90 for the summer and R112 for winter setup. definitely favourite OEM wheels.
@psycho33443 жыл бұрын
Sound better standard?!?!?!?!
@jamieharwood54293 жыл бұрын
whats happening?
@liamstowell89673 жыл бұрын
I’ve just fitted a new rear bumper trim on the car today I’m hoping it doesn’t do the same to me as it did to Jordan as I bought the car off him
@MoraTilRobin Жыл бұрын
@@liamstowell8967 Late answer, but did it melt again? I have just purchased a malian exhaust and i'm afraid that it's going to happen to me too...
@liamstowell8967 Жыл бұрын
@@MoraTilRobin hi bud I lowered it in the end as it wasn’t sitting right but now have a full miltek system on the car
@andrea_jdm_zanon3 жыл бұрын
Is this the 163hp or 170hp?
@akenosan2 жыл бұрын
170.
@jariol3 жыл бұрын
Now that's what I call an honest video
@princenyc92713 жыл бұрын
use the pipe from a jack next time
@bolld3 жыл бұрын
What in is the display?
@simonthiboutot67013 жыл бұрын
i think you foggot the battery cover ? lol
@fetos43093 жыл бұрын
Hi thats twin box system? Thanks.
@sleepercell99263 жыл бұрын
That Malian exhaust is a truly horrible thing. I bet you regret buying that thing now right?
@ironmantooltime2 жыл бұрын
Only the race one, the standard is ok no?
@sleepercell99262 жыл бұрын
@@ironmantooltime Standard Malin is better but its still a long way from being good. I cheaped out and bought a Hornet one from the off and after a day of driving it I regretted it. Went for a resonated Scorpion in the end and have been as pleased as punch. The car sounds top quality. Its better quality than the Miltek. Direnza exhaust comes in third I think. After that its very hit and miss. The cheap ebay stuff gives you exactly what you pay for unfortunately.
@ironmantooltime2 жыл бұрын
@@sleepercell9926 we'll see all the reviews are they're good except the race one is way too loud (which of course it would be considering the size of the silencers). What don't you like, looks like a copy of the miltek, all tig welded...
@sleepercell99262 жыл бұрын
@@ironmantooltime well the quality of the Malian is a bit iffy. Its chinese made from what I know. The fitment is not great either. If you use standard rubbers you end up fouling the rear valance, you have to use the hangers with multiple holes to get it to sit right. I'm not trying to be snobbish but a British hand made exhaust is always going to be better quality than one where the company buys and stamps their brand name on it. Take a look at them before you buy is my advice. Miltek is probably closet to the official JCW exhaust sound, the Scorpion makes a more raspy sound but still sounds nice.
@ironmantooltime2 жыл бұрын
@@sleepercell9926 yea figured was probably a chinese copy of the miltek. Its a pre facelift as well so will need some adjustment. This guys one melted the rear valance... want to avoid that if possible 😬 I'm hoping is better than the stock eurocarparts job the garage was going to fit, and for less. There is a blonde on youtube fitted this one and it seemed ok..
@BradMintun3 жыл бұрын
I felt the part about 3 hours to remove 2 bolts in my soul.
@angelamichelleperez3 жыл бұрын
Does the replacement bring the bolts. I need to change mine but whoever owned my mini before me put some sort of putty to hold the original grill instead of bolts
@rallyman36093 жыл бұрын
Hello , where do you get the longer rear spoiler ? The black part .
@EssexSilvering3 жыл бұрын
Sounds good, well done ... I would of heated those cat bolts with the Mapp gas and undone them. Love the popping!!
@teddycorvette3 жыл бұрын
WD40?
@ironmantooltime2 жыл бұрын
@@teddycorvette won't break rust will need heat or a grinder 😎