Really nice! I just acquired a Yanmar YM187D that I am going through rehabbing. Our tractors are very similar. Mine has the 3 cylinder. I am wondering about your radiator. Can you tell me if it has 2 smaller outlet pipes, ( one smaller for the drain-plug, and one smaller one that goes back to the engine bottom?) of course there is the larger one down low as well. I'm looking to replace mine with a new one and I had heard that the JD 650's were the same.

essentially it's the same thing as my rarely driven 74 square body!... Yes, I still want a Humvee

you placed it in overdrive not drive

Springfield is great, what’s even better is they made a slight let larger version called the “hellcat pro” with a 15 rd mag that also fits and works flawlessly with the normal hellcat

So its just a military version of a C/K 3500 1 ton?

Takes A LOT of power to run a jet drive. Think about it this way. If you had a 10’ boat with a propped 90hp engine on it that weighed 500lbs + driver/rider it would be mind blowing fast like scary, never want to open it up fast lol. Easy 80mph right now. Any time there’s a jet involved take the HP rating and cut 30-50% off for the equivalent propped HP. So by you mentioning a 20hp gain felt like 5-10%, it’s probably pretty accurate.

You should really look up the Doha Agreement.

I replaced my springs with lighter ones and got rid of my military Goodyear tries . I replaced my tires with super swampers iroks with no run flats and the ride is way better !

Sooooooo. Hmmwv or Jeep?

The messed up part is he had to reshoot to hide information from people with bad intentions. Meanwhile, the people truly interested in this video would never harm him even if we had his social security number and current credit cards.

That seems achievable. $10-13 for entry and another $8 to spend along the way to bring it up to par.

So it’s a really cool piece of crap, and like any old vehicle you better have money before you start.

What is the name of the part?

your filming was weak. didn't even show the finished connections behind the dog house

If it was originally a dually, then it would have to be a 350. The 250’s didn’t come with a dual wheel rear end.

Nice project!

I just bought a Humvee with that cluster in it. Any chance you know of an online source for the installation instructions you got? I want to look over mine and just make sure it’s good. Plus I’d like to see what’s involved in getting the turn signals to show. I didn’t even know that was a thing.

I totally wanna buy one of these hummves. How much work is really required in these trucks? Engine problems, modifications, mantince stuff, ext... yes full extremely detailed video! Please!

I found it odd that you refused to say what blow by is. I'm sure you have your reasons, but I don't know what they are. Engine blow-by is when combustion air and fuel leak through the piston rings into the crankcase, usually due to worn piston rings or a damaged cylinder wall. Check for it by removing the oil fill cap while the engine is running. Smoke coming out like it's an exhaust pipe equals blow by. I think I explained it faster than the time you spent saying you weren't going to explain it. Glad to help. 🙂

Here’s the thing dropping $6k on a jet ski for entertainment isn’t really in my best interest

It’s half of 2024. It’s no longer high end 😭

do you have experience with cooling issues on the 6.5l NA HMMWV? Water pump testing, flushing, etc?

Can you do this on 6.2?

We move everything from nw AM General's from Mishawaka, IN to chop shop at the government contractor at Tucson, AZ. My advice is if you can see the underside on a flatbed truck or lift to check wear, lube points, suspension joints, etc. I've got a unit on board right now that's leaking 3 types of fluid on a 700 mile haul out from Ogden to Bell, CA. Any truck driver with a flatbed or stepdeck tractor trailer can deliver. Ramps are a must if the buyer can't provide. As a commercial driver, I use this formula to meet my personal margin. Example: Milage ÷ ave fuel economy (5.5) x average trip fuel price x3 Current trip: 729÷5.5x4x3= $1590.55. This is the lowest possible margin the driver could do it for without taking a loss AND before a third party broker starts adding his percentage.

Get a diesel coolant heater …..also checkout camo tek for a replacement glow plug controller.

oooooo i want to daily one so bad, but they are expensive to get. My budget is only 6500 at the moment XD *crying internally*(im also okay with a barely running no roof beater to build off of). Super clean build man, im insanely jealous.

I did this mod just like you did with 1/8 turn and I’m getting a slight hint of black smoke when the pedal is down to the floor is yours doing this too?

I had a great experience, My truck came as described, started right up with fresh batteries. I won my Bid on June 5, transported to my door on June 13, received SF97 on June 20, had plates on it on June 25. 10/10 would buy more vehicles if I had the room

21k is still a whole lot when you can't finance it, and you need to do all the work yourself - what about all the tools and equipment?

Thanks for the truth about turning up the pump.. My pump has seen better days. So i will be having it rebuilt by Pensacola Diesel soon... I will be talking to them about turning it up slightly...As we here at FULLFORCE MARINE use our Humvee in our work.. Our Humvee is called into duty often...

Fix it so you don't have to this this guy is a moron

Just fix the damn thing

Most are not turbo. This idiot doesn't know much. Dont listen to him. Does not no what he's talking about. Probably doesn't know Dakota

Have u had ur sparks check engine come on the screen and loose powers then it go away and run fine then come back on again

Nice find…just picked up a 2003 M1097A2 2Door with Truck Body from GovPlanet and made it Street Legal in California thanks to the crew at Dirt Legal. Like to connect. By the way my truck only has 2,711 miles on it…pulled it out of Doyle, CA.

I'm inquiring about a solid truck for driving around town and to haul some home improvement items. My budget cannot afford a Ford Raptor. What about a key ignition so someone doesn't drive off with it? -North Texas.

I like the gun but the holster shoukdbt come out when you draw. Maybe look into a kydex hokster with a hook on bottom and top would help the draw with hokster staying in pocket. Great gun tho

how do you insure it, i could not get insurance for one!!!!!!!!!!!!!!!!!

All of these things would be an improvement over my CJ5

Thank You :)

I don't mean to sound like a pick-ass, but the American flag in your garage is not displayed correctly. The canton (the blue field with the stars) should be on the observers left. In other words, you should flip it around. I commend you for displaying our flag but there it should be done properly. Good luck to you.

do you have the foot pegs on that

How’s the fan for the aio mounted? Is it pulling air into the case or out?

Thanks for the great video. I'm in the St Louis area, too. Can I reach out to ask you about the whole registration process? I'm going to pick mine up next weekend.

Ypur my hero, How can I show you my H2?

I am here in 2024 and i will buy this case, thanks for uploading ....

I would say you go to Afghanistan and with a couple of grand you buy one chosen from hundreds left behind by our troops (courtesy of sleepy Joe) with shipment and everything you probably spend 6-8 grand including airfare and end up with a top of the line Humvee. (Don't show your US passport though)

This vehicle is majestic but has too many flaws, floor is not flat, not enough space for luxury seatings, no fine interior like jeep wrangler or ford bronco etc. All vehicle came and gone but this still people buy as H1 or Hmmwe. Unfortunately no any company came forward to mend these flaws.

Nice !!!

Make more of these