Hi curtis I am a little bit concern about the back ground music if it can tune down a bit Thanks.

Hi Curtis, can you help me out! My 2013 vw beetle doesn't have keys and I have 2 to program them. My scanner is not capable of doing it, can you send me a link or an email with all the accessories and scanner that I might need in order to complete this task please? My car is dead and is in stole mode "dealer said this" the dealer wants to replace all the keys, dashboard module, and door locks in order to get it running again. I'll rather purchase all this equipment and do it myself. Thank you

hello sir, can i replace ECU on a FBS4 mercedes using AUTEL?

Hi Curtis,i have bmw 1 series 2007 i just add the key car can start but remote not work i try to get another key also remote doesn't work can you help me?

Don't you copy any data from the original ECU to be written into the donor ?

"VIN number" is a redundant oxymoron; VIN is an acronym for Vehicle Identification Number; you are saying Vehicle Identification Number Number. It's an informative video, though.

Awesome! Get these in all the time w dreaded judder code. Just watched yer vid & performed the procedure on a 16 altima & worked!

Good day mate. I'm looking to buy a used car in Europe. The problem is that most cars there have fake mileage. I don't know which car yet. If you can tell me which scanner ( which can I buy In Australia ) , can read the right mileage from the largest number of the cars. Thanks.

learning to use the tools and running into weird unforeseen issues is why more people don’t do this work. its respectable to help with the aftermarket tools, but what we really need are more robust right to repair legislation at the federal level.

Perhaps you need to be NASTF certified in order for this function to work?

Hi Curtis, how I can download/ obtain ODIS software and how can I purchase VAG gateway access ? Please help me. Thank you

I have as MS 906 Pro and am needing to do this on a 2008 Dodge Magnum. I cannot find where I can do this on the tool. Can you point me in the right direction.

Hello curtis, I have an audi A6 2016 with all.keys lost.Inhave an IM508 and I have two questions. Will i need an active licencse to attain this task? What is the value in ohms of the resistor i will use for reading the bcm? waiting for your reply.

For the 2021 Toyota Not locksmith license it's called NAstF You would have to have a physical location with 3 plus million dollars insurance business license + locksmith license and other things I'm not sure because I'm working for a shop but I have access to it I actually have a video on a LSID Ford That multiple locksmiths couldn't do so I made a video how to do it using AUTEL JVCI AND PC on my channel

cool thanks for sharing!! now would see we can get new model like 2018 & up for Used Multiple BCM module like ford fusion etc

A couple of weeks ago, we swapped the ram promaster 2500 van 2023 into a box truck ram pro master 3500 of 2017. Absolutely everything (engine, transmission, wiring, everything) Only one blind mirror sensor was missing. After 60 miles, there was first an error on the battery and then absolutely all the errors on the dashboard, including the transmission. The dealer station said that it was the missing blind mirror sensor. What do you think about this?

Great job, thanks for sharing!

Hello, do i need the autel j2534 for this?

Any idea where we can obtain one of these crystal quartz components? I broke one, getting it off. Programmed the keys successfully, but buggered it. Need a new one Any ideas?

Thanks for video! What about MaxiCOM Ultra?, if I'm wrong please correct me that difference between Maxisys Ultra only in VCMI.

Top presentation. I just have one question. How do I check via OBD to see if key was previously "Jailbroken"? Thank you Curtis.

Could you ask Autel not to sell their IMMO tools on Amazon so the world can be a better place?

U can do keys by the OBD on Land Rover as long as the alarm isn’t active and the kvm isn’t locked and it’s random some come locked some don’t so I’ve seen even a 2022 Land Rover u can do by OBD

and the same by im608 pro?

First in kurdestan

Thanks for sharing, information about the equipment please

Read ecu data, open hex and load the file, search the existing vin and modify it to the new one, save file, write saved file back into ecu, install ecu back in the car, move on to the next job. Sometimes, people make it more complicated than it is. Also, have the option of emailing the file out and have vin changed, then write it back. Vin is also stored in multiple places and needs to be changed there also, or you will have 2 vins. Your customer has 2 powerful tools, but if he lacks the experience on the im608, you should have helped him with im608 because not everyone can afford to have 2 most expensive autel tools. By the way, great job. I appreciate your videos 👍.

hi how to see real mileage on jaguar/ land rover sdd ?

I have had few requests about saab. I know those need new remotes with codes, and some of them going thru volvo but don't see vehicle coverage on autel website 😮.

When performing AKL on many mark's / models how to find which remote frequency to use? MB using 3 frequencies, USA 315, EU 433, 868.

IM 608 doesn't do scn coding.

Very Informative

After a certain year u have to scn code the module to change the vin which is what u did with the ultra the IM608 also could of done it if u know how to scn code with it

Q bueno q ya regreso

Are we ever going to be able to pay for subscription monthly .like a monthly payment instead of having to buy it all at once?

Is there anyway to buy subscription for my ms919 monthly?

I hope you’re still answering questions about this code. 2016 Nissan Juke has this code and the common symptoms. What are the chances of me finding an independent mechanic with that computer and they can resolve the problem as explained in this video? Thanks in advance for your response!

What about 2018?

You where talking about downgrade the SW, do you mean , the IM608 SW? 🤔 If so, why didn't Autel just updated with a newer SW, that could do all of the jobs, instead of go back to older SW? 🤔

Καλημερα Curtis!!!!

And any suggestion for the third-party provider?

Great video thank you so much! Would you say CAS4/+’s safe by OBD? Done it 10s of times by Xhorse, but Autel US phone support says it’s risky using Autel’s software. Your business management subscription sounds great, though if it includes a yearly im608 subscription, how many months of subscribing to your service qualifies to receive it? Also I’d love to hear what customer management softwares you’d recommend, loosing return business isn’t cool indeed.

Are u sure even if u get the same ecu autel will change the vin because I had a 2009 f150 a few weeks ago where the only way I could change the vin was with ids autel or any of my other 25 tools wouldn’t do it and I have yet to see the virgin ecu options for the Lexus rx300 yes u can write a key on bench but to virgin ecu I had to manually ff the whole eeprom autel didn’t have the option to do it for me maybe they recently updated and it has it now thanks just trying to help and give out good info. And for Toyota it is a dynamic code so it will change with every ignition cycle why not use the Toyota 30pin cable no need to remove smart box just plug into it and then u can back up immo and not need this code that’s how I do it haven’t had one I can’t do yet even did a 2023

Thanks for sharing ❤️

First

Plz reply I have this dodge ram changed everything and moudles but couldn't cranking with push start button

Good job thanks Sir can I program BCM of dodge Ram 2017 to use with Autal mexys J2534 programming device?

So i own a Autel 908s pro elite which is above what your reviewing, along with the $1200 yearly subscription!! And the XTool is hands down better. In every way shape and form. And the subscription price is very fair. The performance is unmatched im sorry but your autel bias. AUTEL HAS HORRIBLE CUSTOMER SERVICE. AND XTOOL COMES WITH 3 YEARS!!!