Why are we using hammers instead of gear pullers (flywheel) and not gapless rings?
@mickdabz2 күн бұрын
Dude why not run zinc all the time stuff is great for preventing wear just don't go over 1200ppm
@ShreeniwasPoudel2 күн бұрын
The link to the plans does not work. Can you please provide the plans. i really want to make this chair
@Mastermol4046 күн бұрын
Hi, that looks amazing. Wondering if you are planning to sell a few conversion kit? Cuz i would buy it
@MountainEagle7710 күн бұрын
I’ve watched dozens and dozens of videos on small engine building for mini bikes, and none of them teach better than this guy. Awesome video and explanation!
@timsimpson457910 күн бұрын
Exceptional informative information cutting short on what you know well and what you know others know better. Awesome stuff!
@sofiaf438711 күн бұрын
Hey should it be washed with warm or cold water please
@timm597014 күн бұрын
Whats the power increase on a build like this
@CaptainRon191315 күн бұрын
Engine not a motor
@SomethingAboutMaking5 күн бұрын
Ahh, you're one of those. 😉
@adambooth.realtor16 күн бұрын
"Some of us don't have friends." 😂Great Video! Thank you.
@sokoleski17 күн бұрын
Gorgeous 😻
@user-gl7fz7cp6r20 күн бұрын
можно бы было выкинуть коленвал и он бы пошел на ибей, хорошее колено даст тут больше всего ... классное видео! Вместо стандартных болтов головки можно использовать более крепкие и термостойкие, если это укладывается в регламент.))
@user-gl7fz7cp6r20 күн бұрын
Для проверки герметичности клапанов используют сжатый воздух и подают его на впус и выпуск наблюдая пузырьки воздуха в жидкости, так-же используют керосин он более текучий и проникающая способность выше, налитая просто так вода может ничего не показать из-за маслянной плёнки и тп.
@georgew.563923 күн бұрын
Bravo! You were very thorough. I can’t imagine what little secrets you were keeping. I’ll have to give that some thought. 😊
@danthurman907624 күн бұрын
Do you make it a stroker ?
@SomethingAboutMaking5 күн бұрын
No. We have to run stock stroke in our league.
@aresafonso667527 күн бұрын
This one time, at band camp
@deutsch420528 күн бұрын
What monitors are those?
@bvick42029 күн бұрын
why are you using a framing hammer and why arent you protecting the threads?
@SomethingAboutMaking5 күн бұрын
Because I'm not a professional but yet everything still worked out. So all is well.
@AsajordanАй бұрын
You should build me a go cart I’ll pay you how ever much you want
@SomethingAboutMaking5 күн бұрын
$2,000,000 + tax.
@MrPoohdudeАй бұрын
Baby
@millerkoldАй бұрын
Once I watched you hit that crank with no nut or tool for removing the flywheel I skipped. You can use the nut. You don't want to ruin the threads
@SomethingAboutMaking5 күн бұрын
thanks for skipping!
@iamchris7581Ай бұрын
Second person that I am aware of that can explain everything simply, not over-complicated, and not too boring.
@EpicFroggy2398Ай бұрын
how can i attach a bike gear to a 196cc honda gx engine
@JakefrcАй бұрын
If you didn’t skim your heads with a belt sander you probably wouldn’t have to run thicker gaskets. If you get them done on a mill you can probably get away with the thinner ones.
@koglioknowsАй бұрын
Love the Impala, my first car was a 68 Impala drove it for years and I miss it. Best of luck.
@bigbelconutАй бұрын
You don't use power tools to put it together, but you risk the chance screwing up the crank and bearings beating on it with a hammer to remove the flywheel, get a puller, or get a lead hammer.
@SomethingAboutMaking5 күн бұрын
ok
@b6983832Ай бұрын
You should have better control of your time and temperature during the developing step. One minute of extra time in developer means about pushing your film +1 stop (doubling the film speed). Pour faster (use a vessel enabling this - beaker, or bottles with a wider opening), and do not use time for washing your stuff when there is developer in the tank. You should immerse your tank in a water bath when not agitating. Wrong or inconsistent temperature means often color casts, or in worst cases, color crossover. Never use chemistry beyond its limits. It will produce bad quality negatives. Film is not cheap, but developers are not very expensive. This is a bad way to spare costs risking to ruin your film.
@jibguy2003Ай бұрын
Awesome ! Thanks.
@ErinIsBlueBlueАй бұрын
What are you doing here ??? With a motor ? It is crazy ! I can't stop thinking about where i'll find you now... You ruined my life.
@SomethingAboutMaking5 күн бұрын
aint the first life I've ruined.
@wiredforstereoАй бұрын
If you're gonna replace almost everything, why can't you just buy those things?
@SomethingAboutMaking5 күн бұрын
You can't buy this engine in a store. You have to find an engine builder to do it.
@wiredforstereo5 күн бұрын
@@SomethingAboutMaking This is exactly my question. Why not just buy it done already.
@SomethingAboutMaking5 күн бұрын
then I suppose the answer is I'd rather pay $2000 for everything and know how everything works so I can work on it myself than pay $4000 to an engine builder and have to take it back to him every time I need something done.
@jrogers1809Ай бұрын
When you’re all said and done building that engine, what is the total cost for all those upgraded parts? Including the engine purchase.
@SomethingAboutMaking5 күн бұрын
price is in the description.
@barenekid9695Ай бұрын
Waste of Time !
@SomethingAboutMaking5 күн бұрын
and yet you wasted more time writing a comment. get your shit together dude.
@nickloproАй бұрын
Amazing how to man! I just put out a 60 second short detailing how I develop black and white film at home. I know what you're thinking. "Oh a short, its probably some low effort video" But I spent over a month working on it. High effort for 60 seconds of content. Hope you can check it out my fellow film tuber!
@gwkdadАй бұрын
Grinding the block over the crank bearing!!!!
@SomethingAboutMaking5 күн бұрын
yep!
@ajarnolaf9034Ай бұрын
was that an acual can opener or a bottle opener @ 07:43? Thanks.
@SomethingAboutMaking5 күн бұрын
yes.
@dogdue45882 ай бұрын
Great video sir!
@dogdue45882 ай бұрын
Brass punch works also.
@dogdue45882 ай бұрын
Air gap.
@reforzar2 ай бұрын
I miss doing this. I wouldn’t wear gloves because I like the smell of the chemicals 😅
@jeffhart17912 ай бұрын
I'd love to find you at a craft show and I believe I am local to you
@mrsquirrel80792 ай бұрын
I have no friends.....glad i have hobbies like this!!!
@jordanlee26452 ай бұрын
Wait, so you can't install a separate stroked crankshaft because that's against the rules, but lengthening and increasing the compression is totally acceptable? That makes literally no sense 😂
@SomethingAboutMaking5 күн бұрын
I didn't make the rules.
@briandeel9802 ай бұрын
You should use alcohol instead of water to see if your valves are sealed
@Brokers712 ай бұрын
Such a beautiful car
@JonathanRansom2 ай бұрын
I don't plan on ever developing photos, but I still watched the whole thing.
@bytesizedengineeringАй бұрын
Me too
@Joao.victor.dev.2 ай бұрын
I'm from Brazil, very good congratulations 👏👏👏
@sgsax2 ай бұрын
Great no-nonsense tutorial. Thanks for sharing!
@smiffy54672 ай бұрын
A little tip David, don’t rewind your film all the way into the canister when you’ve finished shooting, that way you can cut the leader off and start off the spool in daylight before you put it in the bag (there is enough film to do this before the first frame)… I do all my films like this and never had an issues… After you agitate your tank give it a couple of taps on the work surface to dislodge any micro air bubbles from the film surface.. Great to see this content from your channel. 👍🇬🇧
@ouroesa2 ай бұрын
Instructions unclear. Water boiled at 100deg and wouldn't increase temp.
@smiffy54672 ай бұрын
He’s American and using Fahrenheit which is 212 degrees boiling point… His water is 38.9 degrees Celsius for all non Americans 😂
@b6983832Ай бұрын
+100°F is +37.8°C. This would be the standard temperature for C-41. For some reason, many simplified kits sold for hobbyists in the US market use a higher temperature with a slightly longer developing time. I don't know is this because of differences in chemistry, or is it because they assume people will do as this guy did in this video - letting the tank cool down on the table without immersing the tank in a water bath,