Very interesting video. This is more friendly than using the Spreadsheet workbench. Thanks!
@SatyajitRoy20489 күн бұрын
You are the best !
@davidwhiteford493610 күн бұрын
Sir, I would like to encourage you to continue making Ondsel tutorials. Your presentation is technically sound, and your workflow is rational and easy to follow, as is your speech. I'm new to Ondsel and CAD overall, thus I'm presently lacking the basics. However, I can compartmentalize your logical tutorials and incorporate as I get up to speed with the basics. Thank you for taking the time to share your knowledge with others!!
@robertagnarp750217 күн бұрын
”Please don’t hang me for that” 😂😂😂
@pavelperina762919 күн бұрын
Uh. I tried to design board for similar SBC. First I measured it and made model in OpenSCAD. Then it took me 40 minutes to make hollow box, basically two subtracted rectangles that I can use for sketches. I had to start with sketch->pad->sketch->pocket rather than using walls with thickness or cube that cannot be modified at all. Then I tried to make four 6x6mm stands in the corner with fillet on inner corner and align that to walls. This took me like 3 hours, I don't know why. Then holes and I realized screw holes and pocket are different object :-(. Ports were easy but I moved openscad model to intersect walls and did not used binders. After watching this video 8 hours later, many things are clear and I know I can do them better, but learning curve is ... difficult. For example I was not even to turn on shadows, my view is slightly broken (some triangles have weird shading) and when I closely followed adding the lid, it breaks vertical edges 2mm below the top unlike in this video. Plus it's worse and there are some issues I cannot fix, my base plane is showing at weird random angle, once I broke object by separating plane, I have some issues with cyclic dependencies and it's always something, I feel like if I spend something like one hour on model, it breaks. For example slice create two overlapping 3d models. Undo does not have operation name so it's hard to get back.
@samgrainger155422 күн бұрын
Wow, this is huge!
@yahbluez426326 күн бұрын
Thank you!
@astrospacenomy14127 күн бұрын
wow i really appreciate this tutorial, i have learnt a lot. I just want to note, if you are using 0.21.2 when using the shortcuts there is no shift, it is just the letter.
@leroycasterline1122Ай бұрын
At about 7:00, you set the cube's color to orange. I can't get this to work in FC 0.22.38001 or Ondsel 2024.2.38021 - the shape just remains gray. Could this be caused by a preference setting? Or perhaps it's a regression.
@g3i0rАй бұрын
You said that VariableSets can be used to store values across files. How does that work? Isn't a VariableSet stored inside of a FCStd file?
@ingenieromecanicoproАй бұрын
What KDE theme do you use?
@OficineRoboticaАй бұрын
I use the classic breeze theme , just with a different panel arrangement. On top I have "Application titlebar" and global menu plasmoids
@TheMegaturkАй бұрын
Have you used Personal Preference Packs to save your configurations?@@OficineRobotica
@indigo0086Ай бұрын
given the updates to freecad with .22 and 1.0 coming, and with some of the yet to be merged features of linkstage, which do you think you'll be working with more: Ondsel, 0.22dev/1.0, or linkstage?
@OficineRoboticaАй бұрын
I'm plan on using Ondsel/FreeCAD going forward, as functionalities are being actively ported over from Linkstage.
@SkyliptorАй бұрын
It's great to have you back, the video's great as always.
@jjdawg9918Ай бұрын
OMG! that ticking sound in the background
@OficineRoboticaАй бұрын
Yes, you are right, it was a issue with the background music audio level being way to low thus in some cases only the snares are popping out . I'll correct that in the next videos
@layer7ioАй бұрын
I found this to be an excellent introduction tutorial into Ondsel ES / FreeCAD. Thank you for your hard work!
@hanswurst9866Ай бұрын
finally a new video!
@marcus3dАй бұрын
Why have a separate entity like CubeProperties with variables instead of just naming the relevant constraints and refer to them directly, or if it's some property then refer to that directly??
@OficineRoboticaАй бұрын
Var sets are not only about Property.Length or Integer. VarSet can store properties like Color, Link etc etc so they offer a centralized place where to modify values across file/files. Also, imagine handing out your complex file to a customer that want's to make on the fly modifications. Intuitive naming of variables in a VarSet can make this operation a breeze instead of explaining where to hunt for all the values. Also, VarSets can be used headless. That extends to the freecad file format and would be a whole tutorial in itself
@marcus3dАй бұрын
@@OficineRobotica Good points.
@haysoos123Ай бұрын
So this is pretty much a replacement for Dynamic Data? Really great that there’s a built-in solution now.
@AnthonyClayАй бұрын
I've needed this so badly! I've actually had a really hard time dealing with variables to be shared across models (without resorting to multipart) in other CAD software. Usually, my go-to was to use excel spreadsheets to drive a design - but that had strange limitations. This looks basically like multpart, but does seem intuitive to use. Support for integer lists seem to indicate that configurations might be a *really* nice! I'm excited to try this out! Also: *finally* a linux CAD suite that's (maybe) ready for prime-time! I know freeCAD has been here a minute, but I just ...couldn't take the interface/breakage. Recent updates to Ondsel make me feel like it's (maybe) time to dive in - tutorials like this go a long way! Thank you!
@oddlytimbotwillison6296Ай бұрын
That is handy. I can see a case both for variable sets, and for spreadsheet/alias. I can imagine a scenario where it is just easier to see all parameters in a single sheet and be able to navigate them without a lot of GUI clicking, plus the ability to use cells for notes or related information.
@norsenomadАй бұрын
Great video! I found this very useful. Please make more videos using Ondsel ES - its UI and workflow is on another level, the best next step forward for struggling FreeCAD beginners. Thank you for all the useful tips and good explanations, so far, and all time and effort you must put into your quality videos. Cheers!
@Gumball_WАй бұрын
You can have pretty much the same UI if you apply OpenLight theme and a few non-default settings (like a tree overlay and TabBar workbench selector) to FreeCAD 0.22 dev (to be released as 1.0). Most features, including VarSets, are also available upstream.
@iboysvenАй бұрын
Looks way better than the spreadsheets prevously used :) Is this a freecad or ondsel exclusive feature?
@OficineRoboticaАй бұрын
This feature is present in FreeCAD 0.22 dev also
@jc84comАй бұрын
I do like the variable sets. Very impressive way to setup the document over sheets
@Improvement_ggАй бұрын
I think you’re the best channel of freecad you helped me a lot
@daomingjinАй бұрын
but the way people from finland speak so slowly and with their accent makes the video drag on. Not that i don't mind the accent, but i feel like the video is going way too slow as if i'm being talked to incredibly slow on purpose because someone assumes i'm retarded. LOL. good info though.
Ай бұрын
Nice to see you again. Thanks!
@noanyobiseniss7462Ай бұрын
Just tried to watch this but that background ambient you added is making it hard to understand with your accent.
@SianaGearzАй бұрын
Please don't install Glass, it's proper hell. I have spent ages losing my mind why i can't click on the left third of the screen. The concept might be OK but it's so unfinished as to better not be used and it's abandoned for 4 years. I forgot i have Glass and there's no obvious way to configure it, not when you forgot you have it.
@MrPhenix19902 ай бұрын
I try to follow the Tools section but I get no line when creating a subshapebinder from the 2 points of the sketches. What am I missing?
@ravizvisualization2 ай бұрын
Thanks for this video
@ravizvisualization3 ай бұрын
This channel deserves 1 million subscribers
@ravizvisualization3 ай бұрын
For me this is the biggest and best freeCAD channel in the world
@ravizvisualization3 ай бұрын
Why is this not the official version of FreeCAD yet? You have fantastically changed the whole concept of using this program
@kylequinn19633 ай бұрын
I love the Realthunder branch, too bad it constantly crashes on my machine.
@OficineRobotica3 ай бұрын
Have you tried the release from here? github.com/realthunder/FreeCAD/releases What os are you on?
@kylequinn19633 ай бұрын
My god I wish I could figure out why RealThunders link stage 3 branch keeps crashing on me, it's so much better than the main branch.
@ronin21673 ай бұрын
Where is this to download?
@ravizvisualization4 ай бұрын
Once again I recognize this as the largest freeCAD school in the world
@ravizvisualization4 ай бұрын
Thanks for this video again
@ravizvisualization4 ай бұрын
You are today the best channel in the world on FreeCAD!!!
@ravizvisualization4 ай бұрын
Thanks for this video!!!
@ravizvisualization4 ай бұрын
Thanks for this video!!!
@quentinplisson21004 ай бұрын
Hello, I'm trying to customize the workbench list in FreeCAD Link Stable 2024.03.17 to remove workbench I don't use. For for this version I don't have a 'Workbench' section in 'Preferences' and no 'Workbench' tab in 'Customize'. So for this version I can't find how to activate or deactivate workbench Could someone using the latest version of FreeCAD Link help me?
@asd-fw7yb4 ай бұрын
SUPER!! Danke!....🙂👌👍
@rupantaradhikary65804 ай бұрын
This tutorial is really underrated.
@mikhail_z4 ай бұрын
I wonder if it is possible to add geometries to the existing exports
@rubiquemaso4125 ай бұрын
WTF? Begin the tutorial with instructions to DELETE freecad folders? ARE YOU SURE? What about to rename or move them instead? Lots of users are not "advanced" so much and they accidentally can delete their working configs because of trying some customization from youtube... Aaaargh!
@user-vz6gu3pb7f5 ай бұрын
Hi, thanks i really appreciate the way your are explained , thanks a lot for your this video , it really helping many of us , and i would like ask you that "how can we set or make tool bar area Overlay or background transparent , so that we can bit more space to watch our model " "and " bottom banner size to reduce and top banner size" expecting positive response thanks
@inge-brian5 ай бұрын
Is there a way to configure the Linkstage branch so that the interface looks like this on Windows?
@user-bp4ed4vq8g5 ай бұрын
Minha máquina é Windows e eu não estou conseguindo instalar esse tema, versão 0.21.2. O que pode esta acontecendo?
@1809JN5 ай бұрын
Hi, I'M impressed by your tutorials and still learning esprecially with RT make my first drawings. I'm I bit experienced with freecad 0.21 and have question and hope you can help me. I downloaded RT but I didn't get fixed th option of the tree structure shown on the sketch surface on the left side. How do you fix it there where can I find the option? Thanks in advance.