Those wet laps in the last session looked pretty good tbh. Did you change the caster to full caster? Because that is a very important change to make in the wet.
@Maksim-Naumov6 күн бұрын
And yeah thanks for the video, id you do not mind one tip: could you please also share the tightening torque of all bolts when you disassemble or assemble back? Thanks
@Maksim-Naumov6 күн бұрын
Hey, what do you do with the old fuel mixed with oli?
@Potato_boif110 күн бұрын
i really love your vlogs keep the good content up :))
@Racing_Milan9 күн бұрын
Thx mate!!!😁 New content will probably come soon I hope...
@BCrallyvideos10 күн бұрын
Love watching your vlogs mate.i hope some day I will get a chance to drive a rotax. Keep it up 👍🏻
@Racing_Milan9 күн бұрын
Thx bro! Really happy to hear that! If you put your mind to it, you will probably be able to drive a Rotax anytime soon!
@HHallRacing10 күн бұрын
Where do you mount your camera?
@Magnetroncentrifuge9 күн бұрын
i think on his chin
@Racing_Milan9 күн бұрын
Yes, I mount it on the chin of my helmet
@HHallRacing9 күн бұрын
@@Racing_Milan ah thank you
@sixtenallingersandgren667417 күн бұрын
Damn your driving is looking really good already! To be honest at this point (if you can afford it) i would try to buy an evo engine and start doing some races. I think you're driving is absoloutley good enough to start racing and in my experience you learn 5 times more on a race day than a test day. Keep it up man its nice to see people like you and red exions who are really dedicated and do alot on your own, i really relate to that tbh i do most of the stuff myself.
@bas952822 күн бұрын
Na 11 jaar kart ervaring is de beste tip die ik je kan geven is, ga trainen. Vooral opdrukken en nektrainingen. Je kan je dan veel beter concentreren en sneller verbeteren. Ook om beter in te kunnen halen en beter inzicht te krijgen, ga wedstrijden rijden. Hoeft niet gelijk een chrono of bnl, maar een kart4fun of een lokale clubrace ergens. Het kost geld, maar je leert net zoveel als 5 trainings dagen bij elkaar.
@tylersharp316525 күн бұрын
What helmet do you use?
@Racing_Milan24 күн бұрын
I use an LS2 helmet. Its actually a motor helmet, but I'm planning to buy a karting helmet soon, just for a bit more safety
@tylersharp316524 күн бұрын
@@Racing_Milan I use an arai Ck-6 and that’s one I would certainly recommend
@zhengracer13029 күн бұрын
hoezo heb je een ID engines pak?
@Racing_Milan28 күн бұрын
Ik werk bij ID Engines, dat pak zat op een paspop als voorbeeld, maar die paspop ging kapot en toen mocht ik dat pak hebben, echt heel blij mee
@TheSimRacingHub.29 күн бұрын
Kz when?
@Racing_Milan28 күн бұрын
As soon as the wallet is ready haha, hopefully one day though
@TheSimRacingHub.28 күн бұрын
@@Racing_Milan you can try the tilloson even if it is slower
@Racing_Milan26 күн бұрын
@@TheSimRacingHub. Mayby yes, but for now i'm trying to focus on my rotax as much as possible. Mayby it could be fun in the future though
@barryvertigan744929 күн бұрын
Well done mate I can tell yiu are very talented yiur self I am 9 and I do Waterswift restricted and how I see yiu driven it is absolute brillinat🎉
@Racing_Milan28 күн бұрын
Thanks mate, really happy to hear that!😁
@boop_vr1117 күн бұрын
@@Racing_Milan I am actually quite similar to you I think. I moved up from Honda to rotax and on my first day was the quickest on track!
@MH_Karting29 күн бұрын
if you had comentary on your videos it will be mutch better but good work keep it up!!
@Racing_Milan29 күн бұрын
Thx for the tip bro, really apreciate it!!😁💯
@MH_Karting29 күн бұрын
@@Racing_Milan ofc man wish you the best bro!
@Potato_boif129 күн бұрын
lovely content as usual really looking forwards to the next one
@Racing_Milan29 күн бұрын
Thanks man!! It is great to hear you enjoy watching it! Hopefully there will be a next one soon!
@lachlanjeffery8829 күн бұрын
really impressive driving wow, you could tell me youd been driving for multiple years and id believe you
@Racing_Milan29 күн бұрын
TYSM bro!!! These words really do a lot to me! Very happy to hear it!😁
@user-so4bn6wd3f29 күн бұрын
Ziet dr netjes uit
@Racing_Milan29 күн бұрын
Thxx
@HHallRacingАй бұрын
Great driving mate! Are you related to the Porsche Cup driver Dirk Schouten by any chance??
@Racing_Milan29 күн бұрын
Thanks man!! Haha, no unfortunately I'm not related to Dirk, also not to Bas... Would be quite cool though😅
@HHallRacing29 күн бұрын
@@Racing_Milan Do you mind if you give me any tips, as I am going into jnr Rotax off the back of a successful first season of corporate karting. It’s mainly racecraft and overtaking I need to work on, but any bit of advice would be great!
@Racing_Milan28 күн бұрын
@@HHallRacing Not really sure what tips I could give you on that... Simracing always helps, and just do a lot of research about it. Mayby you can check out Ryan Norberg's YT channel, he has some great tips when it comes to the driving!
@HHallRacing27 күн бұрын
@@Racing_Milan Yeah I spend most of my free time playing iRacing and watching karting onboards etc. Ryan Norbergs channel is great and I’ve found it really helpful. I guess it will just come with experience hopefully as I’m only 12 lol 😅
@rm19-racingchannel62Ай бұрын
Wat voor tandwiel overbrenging reed je daar? Lijkt erop dat je een 1000toeren mist in de top, ik zie hem niet boven de 13.100tmp komen (kan me vergissen) misschien een tandje groter gaan achter de volgende keer daar en kijken wat dat doet, dan heb je ook uit de bocht nog wat meer trekkracht. Motor lijkt wel belachelijk sterk te zijn en heel mooi te lopen! Vakwerk van Dennis van der Spoel. En mooi gereden kerel!
@jarnodols239829 күн бұрын
Hey ronnepon❤
@Racing_Milan29 күн бұрын
Ik reed 12:80, ik weet eig niet prc wat mijn max toeren waren, vgm 13.300, maar dan kom ik dus alsnog tekort... Zeker blij met de service van Dennis, heeft hij goed gedaan. Bedankt he!😁
@rm19-racingchannel6229 күн бұрын
@@Racing_Milan ik zou de volgende keer 12/82 proberen. Dat is een bezetting die aangeraden wordt daar. Denk dat je dat echt wat gaat brengen vooral met uitkomen van de bochten. En ben blij dat mijn advies om voor Dennis te kiezen je blij heeft gemaakt.
@rm19-racingchannel6229 күн бұрын
@@jarnodols2398 enne bink
@Racing_Milan28 күн бұрын
@@rm19-racingchannel62 Bedankt voor de tip! Volgende x op de Landsard miss ff proberen dan!
@kelvinator5088Ай бұрын
You're really talented bro, driving that thing as if you've done it your whole life. Super smooth and fast, good stuff!
@Racing_Milan29 күн бұрын
TYSM mate!! I am really happy to hear that and it means a lot to me!! Big thanks for your support bro!😁
@gielenw.9700Ай бұрын
How old is that kart, you should defenitely buy a LN kart
@gielenw.9700Ай бұрын
Very unfunctional working
@Laurent312Ай бұрын
How heavy is the bumper? We use to use simple green way back when :)
@Potato_boif1Ай бұрын
nice video love these vids keep them coming please
@Racing_MilanАй бұрын
I will! Thx for the support!!
@DanWalker97_Ай бұрын
Get some magnesium rims (mxj’s) you don’t really want to use the Aluminum silver wheels with slicks, most people only run them with wets on
@DanWalker97_Ай бұрын
I see you got black rims on there at the end haha, never mind 😄ignore me haha
@bo_bb1442Ай бұрын
Can't you just unplug the starter motor cable from the loom as opposed to unscrewing it from the solenoid?
@Racing_MilanАй бұрын
Mayby, I think that could be possible though. Good tip!
@Racing_MilanАй бұрын
Yes you can, I just didn't see the plug. Just found out how easy it is to unplug lol, some hours of my life wasted😅
@bo_bb1442Ай бұрын
@@Racing_Milan Glad I could help! 😄
@Barely_edit1nАй бұрын
Nice vid love your content btw
@Racing_MilanАй бұрын
Thx mate!! Really apreciate it!
@Tom563sАй бұрын
One question what Kind of Trailer do you use ? It Looks really good.
@Racing_Milan28 күн бұрын
Thxx, we just bought a normal trailer at first, but changed some things about it for the kart and tools/parts.
@Retiredatlast65Ай бұрын
Put some more air in the tires, or go to the next softer grade.
@nickguy831Ай бұрын
Just use a wooden wedge and hammer it in to get starter clutch off after heating it with a hot air gun!
@royeltimani8152Ай бұрын
Great Video Man! The edits and footage are great! Well done on the progress bro! 🔥
@Racing_MilanАй бұрын
Tysm bro! Really apreciate it!!😁
@Mack-parksАй бұрын
congrats brother
@pillow3627Ай бұрын
are you Dirk's brother?
@Racing_MilanАй бұрын
No haha, would be quite cool though...
@DanWalker97_Ай бұрын
Turn the idle screw to stop it from stalling when you stop
@Racing_MilanАй бұрын
Thx for the tip! Really apreciate it!
@MagnetroncentrifugeАй бұрын
Waar zie je eigenlijk je toerental? of doe je het op gevoel en geluid?
@Jasonracing16Ай бұрын
dat kan je zien op de laptimer
@Racing_MilanАй бұрын
Rechtsbovenin op mijn laptimer, maar er hoord alleen nog een nul achter. Dus 13.50 is eigenlijk 13.500 toeren
@MagnetroncentrifugeАй бұрын
zieke video!
@Racing_MilanАй бұрын
Thxx
@lachlanjeffery88Ай бұрын
wow the engine sounds so much better than your last video, before it sounded like it had a restrictor plate in stopping it from revving, now it sounds like its been freed up. Hope it feels as good as it sounds
@Racing_MilanАй бұрын
Yea, it really does! I am very happy with it!
@jamesvarneyracingАй бұрын
im starting my own youtube thing from Devon England. Just doing a few indoor tracks but hoping to get a rotax kart again too!
@Racing_MilanАй бұрын
That's great to hear! Driving a Rotax is really a lot of fun, and it's worth it, just know it can cost quite some money and mechanical service/knowlege. It is important that you buy a good engine, I would advise an Evo, even though a non-evo isn't bad as well. If you buy it second handed, I can also advice to maybe giving it a revision, because I made that mistake, and then my engine failed... Anyways, keep up the good work, you've got some great videos on your channel already!👍🏻
@RedExionsАй бұрын
Met inrijden mag je echt wel meer toeren maken. 10 minuten rijden, de eerste ronde tot 10k, dan een paar ronden daarna tot 11, dan 12 etc. Laatste paar rondjes gewoon volgasss. Leuke video weer!
@Racing_MilanАй бұрын
Weer een mooie tip, thx!😅 Had die 2e sessie tot 10.000 gedaan en de 3e opbouwend, dat is dan alsnog te langzaam dan denk. Maar goed, volgende x kan ik je tip weer mooi toepassen👍🏻
@jamesvarneyracingАй бұрын
what kart do you have
@Racing_MilanАй бұрын
An Exprit from 2019 I believe. With the Rotax Max Senior Non Evo
@jamesvarneyracingАй бұрын
great coverage, keep the videos coming
@Racing_MilanАй бұрын
Thx man! I'm trying to upload as much as I can!👍🏻
@rm19-racingchannel62Ай бұрын
Tevens, minder stuur bewegingen maken. Probeer zo weinig mogelijk aan dat stuur te hengsten, want dit kost allemaal snelheid, zodra die wielen niet recht staan ga je inleveren op snelheid.
@Racing_MilanАй бұрын
Ja, daar heb je zeker gelijk in. Ik probeerde het zo min mogelijk te houden, maar het lukte nog niet helemaal, misschien dat ik steeds net te hard wil... Maar wel weer bedankt voor je tip! Hopen dat ik er wat op kan verbeteren binnenkort!
@rm19-racingchannel62Ай бұрын
Prima stintjes, en motor klinkt mooi weer nu.
@Racing_MilanАй бұрын
Zeker, erg blij mee!
@JasgridАй бұрын
Hey nice video! You should keep uploading, I really enjoy your driving sessions
@Racing_MilanАй бұрын
Tysm, that's great to hear! I'm trying to upload some more content soon!
@davidjeal2626Ай бұрын
at 69 just got my 1st rotax too .. .amazing!!! huge smiles everytime i drive it. Have fun and good luck with yr racing
@zhengracer1302 ай бұрын
bro is redexions☠
@nickguy8312 ай бұрын
Blow the fuel thru!
@quentindierman93422 ай бұрын
Nice video! Last month I drove my rotax max for the first time at Karting des Fagnes at Belgium. I shared the same emotions, the insane power is so much fun. I laughed the exact same way once I felt the rpm's rising. I felt very connected to the kart, only in braking zones I was scared to lock up the rears and spin out. So I know what to work on. I started the day with a 1.10, and after 3 sessions I did a 1.01. My goal was to hit 1min or sub 1min. Still way of the pace but I was proud with how quick I was learning. Keep up the driving and great videos!
@Racing_Milan2 ай бұрын
Hey man! Tysm for the support!😁 For sure driving a rotax for the first time is so much fun! Great to hear you enjoyed it as much as I did, and you really improved on your driving then! Wish you the best, lets keep it up!!💯👊
@oren20002 ай бұрын
very nice for first time, are you related to dirk schouten by any chance?
@Racing_Milan2 ай бұрын
Thxx! I am not related to Dirk, would be quite cool though