Used a de-scaler on mine cleaned it out a treat. 🛀🚿👍

I use slow radius bends and the black 15mm polyplumb pipe inserts as clip spacers. Then slowly slip the climaflex lagging over. Never use the well expensive condensate pro, rip off is an understatement.

great video mate as always not sure that new powerhead has sorted it though as it didn't work until you put the HW on as well 🤔 did you try HW only then CH only? i find that sometimes it will work OK if you do it in a certain sequence which will fool you i reckon you might be back there ☹️

I tried the edge and quickly went back to to turbo 😂

More great content. So glad you didn’t have to wrestle the boiler off the wall to sort the leak. Easy to edit out a mistake nice to see it left in. It is the real world. Mistakes are made it’s how you sort it that’s makes a professional. Thanks for filming all the best Pete 👍

Great plumbing videos mate. Really enjoyable.

Great video Dan! I feel your pain!

Handy tip ,Next time, mark cables before removing from old boiler , it would have been quicker and neater to replace back to wiring centre. no junction box required then . you had the 5 core on your van aswell . But as you say you were having a bad day.

Great stuff, think I would have called my dad in if it had been me , but you sorted it yourself in tend. 👍

Top job Dan

The port valve was working my Arse 😂, Danny Boy had an absolute c**t of a day, What could go wrong did go wrong 😂😂 😎👍🤜

I hate them inserts can be a right pain. Made it look easy Dan❤

Motorised valve takes a few seconds to turn the cam before it hits the microswitch, but I'm sure you know that and it's just red mist. Happens to us all 😂

How much did you charge system boiler swap

I always struggle to get armaflex looking neat. Have to use it at work but at least it's behind a void😂

As always brilliant video, everyone has a bad day and you’re not afraid to admit it, van still looks good especially in the wet 😂 It’s one of the few things I hate about my van the warning bings n bongs, I know it’s in park/door is open/handbrake is on I’m not stupid, If I’m watching a video with a Ford in it the wife will say is that a Ford I heard the chimes 😂. In other news I can drive tomorrow that’s 6 weeks since the knee replacement 🥳

Excellent as always, I use wago connectors they are very good 👍 kind regards and take care matey 😃😃👍👍

I had a nightmare with press fittings last week 😂 maybe it's a cursed month for them. I had an arguement with someone over the right way round for filling loop valves. He was adamant the check valve didn't matter which pipe it went on 😂

Hi Dan. Looks like timber kit house. Up here in Scotland the majority of new houses built have been timber kit for the last 30 years or so. Initially it was 100mm timber stud fully insulated with vapour barrier and plasterboard on the inside. OSB with building paper on the cavity side, cavity and brick or rendered block as an outside skin. Modern kits are now typically 150mm stud fully insulated. Some also have additional insulation on the inside of the stud before the plasterboard. We rarely have inside block skin now. Soil pipe sleeve is a no no though. Good video

Tidy job .

Am glad you managed to get to the press coupling without taking the boiler off I could feel your pain watching it leak

Looks nice and neat

I always use the condensate pro lagging it's so much better than clmaflex although of course its more expensive Love your content b t w it's good to see

Bad day there Dan, all good in the end though.

🤘😎🤘🫖☕️🍪🎥👍👍🇬🇧

😮😮What a pain in the 💩tter😂😂

Don’t waste your time listening to customers diagnosis

Sounds like youll be back for pressure issues 😂😂😂😂

Filter looks tight to get the magnet out! Love your content you put out, you show it how it is.

First class job 👌

Crackin vid Dan, good to see you do an install.. wiring is a nightmare, I never get me mind around it and I’m just watching 😮

Thanks

I use the condensate pro lagging. It looks very good.

Wow wow wow. Everyone talking about the job you do. Anyone noticed the the improvements and levelling up in the video production? Well done with whole intro segment DAN. You are definitely going in the right direction keep it up brother

AS ALWAYS, APPRECIATE ALL THE SUPPORT FROM YOU LOT! If you haven’t subscribed… why not? It’s freeeeeeeeeee❤❤❤

That house may have been clad with bricks at a later date. Maybe that's why the soil pipe sleeve was added?

Only reform will stop the madness and killing in the UK

First ! LFG !

Mate, not sure if my eyes are playing tricks on me, but does it say Chirag on the back of that cistern?? 😂😂😂

probably bits of plastic from the Worcester boiler which can't be flushed

On the edge syphon mate, below the c clip on the plunger, check under the plastic washer to see if there is an o ring missing? Seems like the syphon is breathing air as soon as it passes there

Those Dudley syphons you have to take the rubber washer off the side and fit it inside on the plastic near the spring and you will always get full flush mate

Worked at BG for years never worked on a bog till I set up on my own, had some absolute howlers too mate 😂 It’s all learning 🥴

I binned of TD syphons. Way too expensive. Love the viva parts now.

Just wondering.... what length are your copper pipes from the suppliers. Here in ireland they come 5.5m long..

More great content thanks for filming. Maybe ear defenders when silicone gun comes out customer may get the idea don’t really want to be chatting nonsense to you 😂. Great to show the jobs that don’t always go plan and take longer than expected. Try not to let it stress you put it on the bill and move onto the next job when your done. All the best Pete 👍

Why is it that garden taps never end up straight? No matter how much PTFE I put on, it never ends up tight in the right position.

The life of a plumber eh.. Some days you feel like your a master of your craft.. then the next your cursing and contemplating a career change to stacking shelves in tescos. Just like golf.. this trade is like a cruel mistress.. the highs are high but boy the crap days suck... Keep going Dan👍🏾

The Junior suffered from poor APS positioning. Melting tubes that restrict the flue airway. PCB resistors and relay issues. Plus the blue transformer. Fan has to be spotless too, runs on fast, then slow. Check for flame lift at burner. The twin pass heat exchanger is, by far the worst job you will ever attempt on one of these.

Use viva mate you can’t go wrong