@@happyjellyfish2008 thank you so much for your encouraging words and thanks for stopping by. He IS THE MESSAGE!! Ranger

Thanks for stopping by and taking the time to leave a comment. I hope you all the best. Ranger Sprocket

Goodnight sweetheart…Ranger

@@Project_38 😘

Thanks for stopping by and subbing.. Have a terrific day. Ranger

I will truly look it up. Thanks for the comment and for stopping by. Ranger Sprocket

Thank you.🙏 ☺️

I’m scratching my head… why don’t the non-electric work on the cook top? Seems like if it’d heat a skillet, it’d heat a kettle. Thank you so much for stopping by, I look forward to the discussion. Ranger Sprocket

@Project_38 I don't totally understand it. Induction stove will not heat certain cookware. Something about needing a magnetic type of cookware. I was bummed out. I want to do more research on it. Maybe I need a different stove top percolator? Def need to research it.

@@mstanley97 oic, I didn’t know you had induction, that explains everything. Electric or non, they still produce the best Joe around. Ranger

Amen! My wife got me on that one. I ask her to go make coffee and she told me it’s the man’s job. When I disagreed, she told me it’s in the Bible. I said, “I’m well rehearsed in the scripture and I’ve never read that”; she opened the Bible and began pointing to the top of the page, Hebrews… I got up and made coffee. Thanks for sharing, Ranger Sprocket

I agree with you on taste. It’s like nothing else. -Ranger-

Thank you for stopping by and making a comment. I read and reply to every one. Also, thanks for subscribing!! Ranger Sprocket

What does the salt do? Please elaborate… Thanks for stopping by. Ranger Sprocket

@@Project_38 it makes your coffee salty

@@kurtrussell5228 bahaha 🤣….

Thank you so much, it’s an often occurrence around the fort. It’s slow, but so with it. Ranger Sprocket

Strongly recommend… Ranger Sprocket

I appreciate your thoughts and your review. I’ve honestly not had any issues with mine. Perhaps you’ve done this already, but have you put it on level 3 and tried to tighten them a bit, before reversing… just a thought. Thank you for stopping by, Ranger Sprocket

All seems to be going well, for now. It’ll be a long process. I hope all is well with you. Ranger Sprocket

I sure can. I’ll upload some pump-ops in a few days. Thanks for stopping by.

Thank you so much, for stopping by. It means a lot to know there’s folks still interested in the message. It’s life changing. Thanks for subbing, Ranger Sprocket

I suppose. I’ve always done it this way and we are definitely creatures of habit. Give it a try and let me know how yours turns out. Ranger Sprocket

@@Project_38 I'm going to here soon. I have the spray cans, just need to find the time. Yours looked pretty good though.

@@Project_38 so I just painted my AR using my own method. You are a wise man, and I am the fool. . . Looks like I'll be removing spray paint from my Magpul sights soon😂

@@brianfischer5609 a little bit of lacquer thinner will go a long way. Please post some pictures, I’d love to see your rig. Ranger

I appreciate your decision. At the end of the day, we have to trust the tools in our own shops. Thanks for stopping by. Ranger

@lucindamcmurry4928 Thank you so much. I’m doing good, and feeling better each day. Thank your for stopping by, and we hope to see you and Doc soon. Ranger Sprocket

I’m not familiar with ultra torque. Please elaborate. Ranger

@@Project_38 Hercules makes a 1/2” high torque and a 1/2” ultra torque impact. The ultra torque can’t be beat for the price. To get an impact wrench that has more power you have to pay twice as much and you only get 10% more torque. KZfaq channels like shop tool reviews has the Hercules taking off bolts set to 2000 ft lbs. Mr Subaru smashed it with a tractor, dragged it through the dirt and poured water all over and it still did its job. Another good Hercules is the impact driver, the Torque test channel has Hercules rated above Milwaukee, DeWalt and everyone else. The Hercules hammer drill is also a great buy. Unfortunately the mid torque Hercules and 12v line are not as good as the competition. But I invested into the platform because of the ultra torque and impact driver.

@@DustbowlMic thank you for the clarification. I’ll be taking a look at what you described. Ranger Sprocket

Thanks for stopping by and for your questions. The paint I used had primer in it. Either way, primer is not necessary. After you paint your rifle, or whatever you paint, handling it and rubbing against your gear will cause it to wear off. No worries though, quick touch ups are easy. Ranger Sprocket

@@Project_38 Thanks! You did a good job. I’ve now watched every single video on YT of people painting their rifles. You get something different from everyone. I’m gonna start with my old Red Ryder BB gun first!

@42WasTheAnswer just do it.

Hey, I really appreciate your comments. Jesus is the reason for all I do. He’s why I sing, why I teach, why I preach. I’m just a simple man, with a deep desire to see the lost find the Savior. Also, my contact information can be found in the about me page. Ranger Sprocket.

I had a similar issue at first also. I also found that the lugs were so tight I had to use a 4’ cheater pipe to break them. I do not trust any garage/tire shop to do any wheel work. They always over tighten. We’re still using ours, almost daily without any problems. I hope it get better for ya. Thanks for stopping by, Ranger Sprocket.

Shop probably did too much ugga duggas😂

Thank you for stopping by the channel. Ranger

I have a couple Ryobi tools on the day job. In a commercial setting, we haven’t seen them hold up to the multiple charges per day and the demands “aka abuse” of all day use. We’ll definitely see how the Hercules holds up over time. Thank you for stopping by and the insight you provided. Ranger Sprocket

Thank your for stopping by. And may God bless you too. Ranger

I think they’re winning me over, too

Thank you so much. I appreciate the prayers. God is so good. Ranger.

Absolutely! One Savior, crucified, risen and coming again. Thank you for stopping by, Ranger Sprocket

@256NATO, I have several that have been painted for 15 years or longer. The one in the video, has only been painted since the video. If it’s done properly, it’ll last. Ranger Sprocket

I’ll get it done. Stay tuned.

Thank you so much. Grab some rattle cans and get to spraying.

​@Project_38 ive painted 4 of mine since this comment lol

Add some photos. I’m interested is seeing your work.

Amen!! It truly the Good News. Thanks for stopping by. Ranger Sprocket

Thank you so much. Your words encourage me. Thank for stopping by, Ranger Sprocket

I’ve also used NP before, and model car paint. In the end, any type of paint will work. I’d be interested to see your results, if you have pics… Ranger Sprocket

😅

@bsedrick78, it’s always a pleasure.

Lol

I only have the 1/2” and so far is been very surprising. Lug nuts, caliper brackets, ball joint and upper control arm bolts from several vehicles. I used it for the steering shaft on an F-150. So far, it’s a keeper. I’m considering getting the larger one Hercules offers and by what you say, perhaps the 1/4” also. Anyway, seems like it to be handy on smaller things, like caliper guide pin bolts, oil pan bolts or other simpler vehicle maintenance. Thank you for you comment and for stopping by. Ranger Sprocket

@@Project_38 im glad it working out for sure, i tried using it on lugs on my mazda 3 and it didnt work at all, what i did do was get another 1/4 and swap the anvil so i made my own 3/8 impact and thats my go to from now on.

@Mr19860823 Initially, mine struggled with lug nuts. That being said, I also had to use a breaker-bar with a cheater pipe to break’em loose. Everything that has been torqued to spec., hasn’t been an issue. I’m not perfect, but I always torque my lug nuts. Mostly because I’ve been on the side of the road and the supplies lug wrench wasn’t sufficient to break them loose. I had to call in reinforcements… I’d be interested to see your swap video on the anvil swap… Ranger

Is that one that is 1/4 brushless with the 5 year warranty?

150ft lb on the car,holy cow that's a lot on a car

Thank you so much. You be blessed, too. Ranger Sprocket

Thank you, I’m trying. Ranger Sprocket

Lol

@treywashburn8859 that’s even better. I’m sure it will be abused.

Bought mine in early January it's ok but there is no way it puts out 500 Foot pounds out BREAK AWAY TQ

@@THEBEARDEDTOOLGUY I agree. There has been a couple times I’ve had to grab the breaker bar. Advertised in laboratory testing and real life are two different environments.

@0987_ There’s none other name among men…

Awesome, I hope you get to make it. Please send me some pictures when they’re done. Merry Christmas, in advanced Ranger Sprocket

Thanks for stopping by my channel. Ranger Sprocket