Hercules 20v, 1/2" Compact Impact Wrench

Рет қаралды 7,156

Күн бұрын

On today's video, we review and demonstrate the Hercules 20v 1/2" Compact Impact Wrench, from Harbor Freight. For $74.00, is it worth the hype...

Пікірлер: 55

@northernwelshman4549 4 ай бұрын

I resemble your remarks. I bought the 1/2 1500 And here to tell I’m impressed trough and trough for a 1/3 of $ as the comp. Upper control arm bushing bolts5/8”(limited access) with 219,000 miles of Wisconsin rust, 6 point wrench against the frame and my new mistress had smoke rollin filings flying while banshees screamed and still she clicked and still she turned! My new love in life.

@Project_38 4 ай бұрын

Lol

@ssmith3711 2 ай бұрын

Came for the review of the compact impact. Subscribed because of the gospel. Keep up the good work brother

@Project_38 2 ай бұрын

Thank you so much, for stopping by. It means a lot to know there’s folks still interested in the message. It’s life changing. Thanks for subbing, Ranger Sprocket

@stevereese9945 3 ай бұрын

I bought the big 1/2 inch model in Paintsville and can rotate my tires on my 3/4 ton truck and only use 1 bar of battery. Very impressed with Hercules. Since then i bought the 3/8 impact and the cordless grinder. Can’t go wrong with Hercules

@Project_38 3 ай бұрын

I think they’re winning me over, too

@bass305-HCCA 3 ай бұрын

Great video sir. God bless you. 🙏🏻

@Project_38 3 ай бұрын

Thank your for stopping by. And may God bless you too. Ranger

@nacetucker4939 5 ай бұрын

Love ya Chanel keep it up

@Project_38 5 ай бұрын

Thank you, I’m trying. Ranger Sprocket

@nnannaokoroji8451 4 ай бұрын

Amen! Remain BLESSED!

@Project_38 4 ай бұрын

Thank you so much. You be blessed, too. Ranger Sprocket

@bsedrick78 4 ай бұрын

God bless you brother.Thanks for the video.

@bsedrick78 4 ай бұрын

😅

@Project_38 4 ай бұрын

@bsedrick78, it’s always a pleasure.

@emmcee476 2 ай бұрын

I'm happy with my Hercules impact driver and 1/2 High Torque impact wrench. Both have the 5a battery. However, this 1/2 compact impact wrench is not very strong. Tried it and returned it the next day when it struggled to take off lugs on some cars. I ended up purchasing the Dewalt DCF891 Mid Torque (800ft/lb) with the 5a Powerstack battery which is as strong as the feedback all around says. If it continues to perform this good, the Hercules High Torque will come out only for certain tasks

@Project_38 2 ай бұрын

I appreciate your decision. At the end of the day, we have to trust the tools in our own shops. Thanks for stopping by. Ranger

@jonatis01 3 ай бұрын

Came for the tool review, stayed for the Gospel! God bless!

@Project_38 3 ай бұрын

Amen!! It truly the Good News. Thanks for stopping by. Ranger Sprocket

@workingcountry1776 3 ай бұрын

$99 for charger and battery w/ "free" tool from a list, this is one. God bless

@Project_38 3 ай бұрын

Thank you for stopping by the channel. Ranger

@ab75901 2 ай бұрын

Good video I’ve been looking at trying one of these since my 6+ year old kobalt stuff is getting old and starting to give the death flash and stops working so time to try a different brand, I’m not a mechanic so no need to buy milwaukee again after mine were stolen just looking for tools to get the job done and seems like the compact 1/2 will do that I’m pretty sure it has more power then my old 3/8 kobalt that has worked for years lol

@Project_38 2 ай бұрын

Currently, I have a 09 F-150 in my shop. The only bolt I haven’t been able to break with the Hercules was the crankshaft/harmonic balancer bolt. That rascal is tight. I’m very pleased with its performance. I also understand that it’s 1/2” drive cordless and there are limitations. I don’t have an air compressor at my home shop yet, and I’ve never really been into noisy air tools. Ranger

@ab75901 2 ай бұрын

@@Project_38 thanks for the reply that’s good to hear nothing I work on is really super tight the old 3/8 kobalt usually works but it’s wore out and aggravating having to stop and remove battery after it just starts flashing but after 6+ years I got my money back out of it so time to try something new lol thanks again for the reply back

@BitterMedicineNoSugar Ай бұрын

Amen brother

@Project_38 Ай бұрын

Thanks for stopping by and subbing.. Have a terrific day. Ranger

@MechanicsHome 23 күн бұрын

so great

@Project_38 22 күн бұрын

Thanks for stopping by and taking the time to leave a comment. I hope you all the best. Ranger Sprocket

@quinton01 3 ай бұрын

Thank you and God bless! The Lord wants a relationship with all us and wants to save us!

@Project_38 3 ай бұрын

Absolutely! One Savior, crucified, risen and coming again. Thank you for stopping by, Ranger Sprocket

@munsell2010 2 ай бұрын

The Hercules ultra torque is awesome. Outside of that it’s a hit or miss. But most of the time still a better value than the competition.

@Project_38 2 ай бұрын

I’m not familiar with ultra torque. Please elaborate. Ranger

@munsell2010 2 ай бұрын

@@Project_38 Hercules makes a 1/2” high torque and a 1/2” ultra torque impact. The ultra torque can’t be beat for the price. To get an impact wrench that has more power you have to pay twice as much and you only get 10% more torque. KZfaq channels like shop tool reviews has the Hercules taking off bolts set to 2000 ft lbs. Mr Subaru smashed it with a tractor, dragged it through the dirt and poured water all over and it still did its job. Another good Hercules is the impact driver, the Torque test channel has Hercules rated above Milwaukee, DeWalt and everyone else. The Hercules hammer drill is also a great buy. Unfortunately the mid torque Hercules and 12v line are not as good as the competition. But I invested into the platform because of the ultra torque and impact driver.

@Project_38 2 ай бұрын

@@munsell2010 thank you for the clarification. I’ll be taking a look at what you described. Ranger Sprocket

@n6nvr 3 ай бұрын

I checked these out on sale and unfortunately after two medium size batteries and a charger, it was cheaper to get a Ryobi because I already have plenty of Ryobi batteries and chargers.

@Project_38 3 ай бұрын

I have a couple Ryobi tools on the day job. In a commercial setting, we haven’t seen them hold up to the multiple charges per day and the demands “aka abuse” of all day use. We’ll definitely see how the Hercules holds up over time. Thank you for stopping by and the insight you provided. Ranger Sprocket

@treywashburn8859 5 ай бұрын

You have a 5 year warranty on the tool and 3 years on the battery

@Project_38 5 ай бұрын

@treywashburn8859 that’s even better. I’m sure it will be abused.

@THEBEARDEDTOOLGUY 5 ай бұрын

Bought mine in early January it's ok but there is no way it puts out 500 Foot pounds out BREAK AWAY TQ

@Project_38 5 ай бұрын

@@THEBEARDEDTOOLGUY I agree. There has been a couple times I’ve had to grab the breaker bar. Advertised in laboratory testing and real life are two different environments.

@alaind831 Ай бұрын

must be hit and miss as I can't loosen lug nuts on my car which I hand torques to 129ft/lb just weeks ago - clearly nowwhere the rated 500 ft/pd or the 300 max rating on the site... I'm not alone as other video show hand tightening to 100lb and not able to loosen even with a full 5A battery. maybe I got a lemon.

@Project_38 Ай бұрын

I appreciate your thoughts and your review. I’ve honestly not had any issues with mine. Perhaps you’ve done this already, but have you put it on level 3 and tried to tighten them a bit, before reversing… just a thought. Thank you for stopping by, Ranger Sprocket

@breastmeatonly 5 ай бұрын

Hercucheese

@Project_38 5 ай бұрын

Lol

@terrihunt522 3 ай бұрын

Just bought this, very disappointed, won’t even loosen lug nuts on my Honda accord

@Project_38 3 ай бұрын

I had a similar issue at first also. I also found that the lugs were so tight I had to use a 4’ cheater pipe to break them. I do not trust any garage/tire shop to do any wheel work. They always over tighten. We’re still using ours, almost daily without any problems. I hope it get better for ya. Thanks for stopping by, Ranger Sprocket.

@Korean_Jesus Ай бұрын

Shop probably did too much ugga duggas😂

@Mr19860823 4 ай бұрын

i didnt like mine, the 1/4 has more power

@Project_38 4 ай бұрын

I only have the 1/2” and so far is been very surprising. Lug nuts, caliper brackets, ball joint and upper control arm bolts from several vehicles. I used it for the steering shaft on an F-150. So far, it’s a keeper. I’m considering getting the larger one Hercules offers and by what you say, perhaps the 1/4” also. Anyway, seems like it to be handy on smaller things, like caliper guide pin bolts, oil pan bolts or other simpler vehicle maintenance. Thank you for you comment and for stopping by. Ranger Sprocket

@Mr19860823 4 ай бұрын

@@Project_38 im glad it working out for sure, i tried using it on lugs on my mazda 3 and it didnt work at all, what i did do was get another 1/4 and swap the anvil so i made my own 3/8 impact and thats my go to from now on.

@Project_38 4 ай бұрын

@Mr19860823 Initially, mine struggled with lug nuts. That being said, I also had to use a breaker-bar with a cheater pipe to break’em loose. Everything that has been torqued to spec., hasn’t been an issue. I’m not perfect, but I always torque my lug nuts. Mostly because I’ve been on the side of the road and the supplies lug wrench wasn’t sufficient to break them loose. I had to call in reinforcements… I’d be interested to see your swap video on the anvil swap… Ranger

@jsully4074 4 ай бұрын

Is that one that is 1/4 brushless with the 5 year warranty?

@williamrogers8299 4 ай бұрын

150ft lb on the car,holy cow that's a lot on a car