Awesome walkthrough! tyfs

You say it only cost about $150, but the Johnson kit you bought is listed at $205 on Amazon. I'm thinking you meant $350.

Someone give this man "Best KZfaq Video for 2024 award". Thanks for the info

I kept my cutter , set screws, dies / taps / easy outs for my valve grinder & borers .

Ingeneous solution, if u havent gotta chain saw...

I have this strap wrench and I can't really find any info on it. Do you know when it was made?

I'm impressed that your torti can stay in the shop while you're running all those tools.

Wow! I always enjoy watching beautiful, elegant machines like this getting cleaned up and fully restored, ready to fill someone's eye and ready to get back to work! And thanks for the history lesson! Excellent work!

😊 yes I want to sharpen and bring back to life my mom's and grandma's old fabric scissors

Like Hudsons Bay Blanket..nice..

Mr. Wig did it..i saw it..😮

Very nice job. Mine is due soon. My 900 series does not have the cowl or speed reducer. Mine is in china red enamel that i don't really like. I am not a fan of that black either. But anyways, i have a Metabo keyless chuck, and friend let me tell you... It's the bees knees. You deserve a 🍺 🍻

Germany has water heated towel bars that also heat the room.

92 degree 😮😮😮 its a farrenheight lol 😂😂😂😂

So far, so good. I love your content.

I have the opposite problem, my lock will not spin on the first time it extends. I have to do a half turn to let it loosen or release and the. Spin it or else someone can walk up and unlock the door right behind me. What is the fix for that? Thanks!

Thank you!!! Great video and detailed explanation …10 minutes ago, I thought ours broke and we were going to have to go in and out of the garage until I got a replacement… pulled up this video and 3 minutes later i fixed the issue!

Just use your video to air my lock. I was all set to go out and buy a replacement but now I don’t need to very grateful for this helpful information. Keep up the good work.

Really good work love it

Well Done 10X

Testing on paper is easy. try to test on polyester cloth !

what was the mirror for in these old boxes?

I say right on all the time. I'm 68. Kids love it. Lol Cool video

Which Tap-Handle did you use?

Does this method not leave stain on body and clothes?

After a a few yrs of searching for the production table I found one and was able to get it today locally. Prestin condition, no drill marks on the machined surface. Stoked to own one in near perfect condition! It will look deluxe on my WT 900 floor model. And yes black and silver (polished metal) go very well together

Do the tapping blocks come in different sizes for different taps? Seems inconvenient to carry a bunch of tapping blocks on a job tho

That IS good finish, I used it for years on hardwood floors.

First timer on this channel. The way you talk and your voice remind me of Alan Watts. Thank you for the thorough explanation

Thanks for the tip. I will try on my small disc sander.

So your door is less than 1/2" thick? Or you're not using a 2x4 for the bottom and top plate? 3.5" wide 2x4. Turn the studs, each stud is 1.5" thick. So you have a .5" gap... 🤔

Thank you! I’m saving this video for when the lock malfunctions again, because once they mess up, it always happens again.

Putting a waterproof membrane over a waterproof membrane, that’s overkill

How can I truly get a "drop" of the thin CA without it flowing more onto the joint?

NO! looks great but heat kills cable. I had a cable brake and a friend that worked construction looked at it and said it had been heated. I said yeah I cut the frayed end off with a torch. he said that's why it broke and made me cut it off about 10 feet up the cable with an angle grinder. never use heat on a cable or wire rope.

Thank you been running into same issue on my 96 jeep gc zj with the 5.2 been getting left w oil pressure after driving for a bit at idle so wanted to check to see if its a common issue im going to try this

Bottom line is, Kerdi is not waterproof. That's because the thinset used to assemble the pan is not waterproof. So, SOME Kerdi showers fail. Hydroban over deck mud is seamless. And waaay less expensive.

I have a slightly different model and determined that I only needed to change my battery. Still, the video was immensely helpful. Many thanks!!!

I'm 2 years late to the party, but let me ask you this. Would you say your experiment was worth it for it's dehumidificaton effect only, ignoring cooling all together.

I do indeed took me back to 93-94

Thanks for the tip Jon !

What a beautifully over-engineered sled. I'm definitely going to apply some of that to mine.

Followed this just brilliant guide thank you!

This is the video I was looking for a week ago! Thank you!

15 minutes ago I was using steel wool on my Walker Turner Belt/Disc Driver series sander and thought afterwards that I should coat it with something. Then I come inside for lunch, go to youtube while eating my lunch, and your video pops-up! Amazing!

If I’m running railing cable, one end is crimped, how can I use this to cut the other end? There is no cut to use the drill. Do I cut extra then apply this method to the other end? That’s 2 cuts. What am I not seeing?

Nicely done. What I'm really confused by at the moment is how to build the closing jamb. Seems so simple, but I see nothing about it online anywhere. You have a more streamlined look instead of a traditional kit, which is exactly the look I'm going for. Love your black trim detail around the edge as well. Would love a little clarity regarding the jamb details if you have the time. Thank you.

I love the big disc sanders for both wood and metal projects.

Link in description for the Zirconia discs and wax 🙌 Right On! 👍

Cool tip if you're using adhesive sandpaper. There are also tacky adhesives you can spray on to non-adhesive ones, allowing for easy removal and reapplication without damaging it.