Did you ever figure out how to change the radio in the aristo, I have the same model. Had it for 2 weeks and I need to upgrade it.
@brandonrigsby08Күн бұрын
I'm bringing my 2016 wrx to you guys real soon!
@tommykentnerКүн бұрын
Just give us a call and set up an appointment.
@donchai7619 күн бұрын
where are you guys located?
@tommykentner9 күн бұрын
Clarksville Tennessee
@spdcrzy11 күн бұрын
This is one of THE only videos I've ever seen of someone working on the front diff of an R35. Questions I have: Does the left front axle go through the oil pan, or is that an optical illusion? Can the transfer case be angled in such a way that the front driveshaft is not so low relative to the engine output shaft? Can the drivetrain be lengthened so that a dry sump engine could, theoretically, be placed behind AND as low as the front drivetrain assembly (including the front diff)? And, if that was possible, could it be possible to swap the drivetrain and harness to a different suspension concept and chassis entirely but retain all the control modules?
@tommykentner7 күн бұрын
The axle does go through the oil pan and you can get the front differential out with the engine hanging.
@spdcrzy7 күн бұрын
@@tommykentner I feel like this isn't discussed often enough - it's a highly uncommon practice as far as I'm aware.
@tommykentner7 күн бұрын
@@spdcrzy it is! A few big shops have set the cars up as rear wheel drive to make them go faster.
@spdcrzy7 күн бұрын
@@tommykentner this I know. My question is, is it possible to (theoretically) use just the drivetrain bits but create a true front-midship AWD platform with the engine and oil pan completely behind the front axles?
@spencermoore658815 күн бұрын
Any videos with this yet? Stuck on this or a 35-1050
@tommykentner15 күн бұрын
We are going with the G40-1150 get the car back from wrap next week so we should be hearing it soon. 👊😎
@MikeSorrell-lp7zf16 күн бұрын
why...some one stole my cat with a saws all.sounded better than this.its a Forester....why annoy the animals in the woods where it belongs.id want it whisper quite.and yes I own a Forester.
@tommykentner15 күн бұрын
😂 some people like it loud!
@nonayounes475316 күн бұрын
r35 is real godzille
@tommykentner16 күн бұрын
R32 is the OG Godzilla
@21sausage24Ай бұрын
Are you selling the 5? I'm interested
@tommykentnerАй бұрын
Not looking to sell but if it a good offer.
@21sausage24Ай бұрын
@@tommykentner i can do 38
@tommykentner29 күн бұрын
@21sausage24 let me think about that. I’ve ordered a few parts for it. Would you be interested in those to?
@21sausage2429 күн бұрын
@@tommykentnerwe can DM there
@tommykentner29 күн бұрын
Can you message on Instagram or Facebook?
@mchavez0130Ай бұрын
Brother, it’s been up and down for me with the ets pro, I was finally able to get it working but now Everytime I turn the car off and on it starts in manual mode, was this happening to you as well while you were figuring it out?
@tommykentner15 күн бұрын
We was fighting an issue of not getting any power to are because a fuse was removed. Did you get your issue resolved?
@patm8880Ай бұрын
were you able to put the Crash bar back on or the intercooler doesnt let you?
@tommykentnerАй бұрын
Yes I was with this Intercooler kit.
@brianstalter6569Ай бұрын
Shop always looks so clean!
@tommykentnerАй бұрын
I appreciate it brother! We put all of hard work into it. 👊😎
@josephjdm4877Ай бұрын
How you wired up speed sensor
@tommykentnerАй бұрын
IWire done the harness
@josephjdm4877Ай бұрын
@@tommykentner any kit you using or I wire
@tommykentnerАй бұрын
@@josephjdm4877 I think they do have a kit we just sent the whole harness in and they did the harness merge for us.
@robsonrissotrainerАй бұрын
Does the new dip stick give you a hard time to put it back? Mine about 3 inches before its fully back it gets stuck at the curve and I have to force it down slowly, just wondering if yours does the same
@tommykentnerАй бұрын
No I didn’t have any problems with it worked like oem.
@robsonrissotrainerАй бұрын
@@tommykentner nice, mine gets a little bit stuck at the bottom about 3 inches before getting all connected, right where it hit the curve, but then I force it down and it goes
@tommykentnerАй бұрын
@@robsonrissotrainer the tube might have got bent in shipping if your having trouble with it.
@dahlbacka4Ай бұрын
did it ever dyno? going same setup exactly
@dahlbacka4Ай бұрын
any issues?
@tommykentnerАй бұрын
Not yet waiting on getting the car wrapped and finished up built. Hopefully will have it running in a month or so.
@louiienation8497Ай бұрын
What power level did that G35-1050 max out at?
@tommykentnerАй бұрын
900 whp!
@louiienation8497Ай бұрын
@@tommykentner niceeeeeeee!!
@tommykentnerАй бұрын
@@louiienation8497 it a really good turbo!
@louiienation8497Ай бұрын
@@tommykentner I plan on using theT4 divided configuration of this turbo on my VQ37VHR (on my 370z) engine and hoping to squeeze out 900whp out of it as well. I’m glad to hear it’s an amazing turbo.
@Saness177Ай бұрын
If you comment supra or gtr your gay
@tommykentnerАй бұрын
👊😂
@untamedcollective5639Ай бұрын
If there any need to top up gear box oil? It’s not link right ?
@tommykentnerАй бұрын
If you get a new one from Nissan it comes full
@PromodZeusАй бұрын
are they 15x9 would those clear the R33 GTR Brembo's?
@tommykentnerАй бұрын
I don’t think they will clear brembo.
@pmlaaudio468Ай бұрын
I may have missed it in one of the comments in one of the videos lol but what oil do you recommend for the 2018 xt? Thank you
@tommykentnerАй бұрын
AMSOIL 5w30 signature, or Motul 5w40
@1986kojikoji2 ай бұрын
5 is better..
@tommykentner2 ай бұрын
I agree! 👊😎
@1986kojikoji2 ай бұрын
Rare steering wheel
@tommykentner2 ай бұрын
Is it?
@glennborek23592 ай бұрын
The OLD SBC ain’t going anywhere anytime soon
@tommykentner2 ай бұрын
Right! 👊😎
@Turbo_Tractors2 ай бұрын
What tyres mate? Cheers
@tommykentner2 ай бұрын
ET SS 255/50R15
@harleyreb90132 ай бұрын
I’ve lived in paint rock my whole life and I never knew they did a rally there I just thought it was for dirt bikes
@tommykentner2 ай бұрын
And the rally racing is really fun! And they have cars to rent! 👊😎
@Mcdonaldt0012 ай бұрын
Does A/C and everything function? I could hardly hear due to the wind noise? Torn between this and KPRO
@tommykentner2 ай бұрын
You just have to hook up the power and it will function like normal haltech is a lot better than kpro just take a little bit of setup. Look into humble performance videos on it.
@Mcdonaldt0012 ай бұрын
@@tommykentner Thanks I have watched some of their videos. That’s who I plan on taking the car to after I boost it. Luckily they are nearby
@tommykentner2 ай бұрын
@Mcdonaldt001 no problem! If you need anything just let me know! 👊😎
@Mcdonaldt0012 ай бұрын
@@tommykentner I thought the Elite 1500 had more than enough inputs and outputs for a stock car. But you said you need the expander box in order to run air conditioning? Did I hear that right
@tommykentner2 ай бұрын
@@Mcdonaldt001 it has enough input to do a/c just have to use one that not in uses.
@jacobbowles53892 ай бұрын
Betty White is looking like a new car 🔥
@tommykentner2 ай бұрын
Thanks brother! It clean up nice!
@noemuniz69862 ай бұрын
Wait, where is the part where you let us hear how it sounds?? Noooo all this time for that 😢
@tommykentner2 ай бұрын
Video coming soon 👊😎
@SutAdrian2 ай бұрын
Impresive ,what’s the spec Cams Turbo size Headwork Rods & pistons comp ratio Lots o questions I no but I run two r32 gtrs myself and build them myself so respect your work
@tommykentner2 ай бұрын
Tomei 264 cams All the head work shim less bucks port and polished It old fp 72 mm turbo Mainly rod and piston stock ratio Running 40psi Rb26
@victoriakentner65072 ай бұрын
I saw vr4 and thought you'd be showing my car 😂😂😂 I'm so glad Betty is back and she's FAST lol
@tommykentner2 ай бұрын
😂🤣 Hopefully in the next one! And you ain’t kidding Betty is running great!!! So glad to have her back on the streets! 👊😎
@gen3camry2 ай бұрын
Love this video! So many cars to see. Going to try to come out one day this week or next to hang out.
@tommykentner2 ай бұрын
I appreciate it brother! And let us know anyway look forward to hanging out! 👊😎
@PowerRageSTI2 ай бұрын
I be out there next week
@tommykentner2 ай бұрын
Roger that brother! 👊😎
@FierceMotorsports2 ай бұрын
Love me some Betty White ♥️♥️
@tommykentner2 ай бұрын
Thank you! 👊😎
@PowerRageSTI2 ай бұрын
I love it
@tommykentner2 ай бұрын
Thanks brother! 👊😎
@christopher-xv2lm2 ай бұрын
Something aint right man ive seen 600hp r32's more violent than this
@tommykentner2 ай бұрын
When the Rb26 is hang on for dear life you have to bring it soft to not crack the block.
@damnitdang2 ай бұрын
How smooth is the inside of those runner on the artec?
@tommykentner2 ай бұрын
It really smooth it flow cast will hopefully Dyno test it in a few months. 🤞
@damnitdang2 ай бұрын
@tommykentner nice, I'm really debating on this artec in t4 twin scroll top mount, or the spa cast top mount . I need to find out if it'll fit my chassy.
@tommykentner2 ай бұрын
@@damnitdang you can’t go wrong with the artec it a good exhaust manifold that will not give you problems.
@trevorod46712 ай бұрын
I had one of these before it was an absolute rocket! It Pissed off civic vtec and corolla 20 valve owners at the time. 😆
@tommykentner2 ай бұрын
They are super fun to drive and quick cars! 👊😎
@jacobbowles53892 ай бұрын
Very clean. Back to the dark side lol😂
@tommykentner2 ай бұрын
Right! Can’t go wrong with nice DSM
@jacobbowles53892 ай бұрын
@@tommykentner definitely and that one is so clean. I can’t wait to see it in person
@tommykentner2 ай бұрын
It super clean you might have to get you another DSM.
@PowerRageSTI2 ай бұрын
You sure did say I will never buy one again
@tommykentner2 ай бұрын
😂 you can’t take the DSM guy out of Adrian.
@PowerRageSTI2 ай бұрын
@@tommykentner right he knows it no matter how many other cars he gets
@tommykentner2 ай бұрын
@PowerRageSTI Right! 😂🤣
@MichaelSparks2 ай бұрын
Cool I don't guess I've ever seen one!
@tommykentner2 ай бұрын
Thanks Michael they are pretty rare!
@victoriakentner65072 ай бұрын
Very nice!
@tommykentner2 ай бұрын
Thank you! 👊🎃
@gen3camry2 ай бұрын
Holy crap the car looks to be in crazy good condition! I’m ready for a ride.
@tommykentner2 ай бұрын
Thanks brother! We going to get on haltech and take ya for a ride!
@TheSlimerider2 ай бұрын
i can not find the full breakdown on how to do this. do you guys have a step by step video?
@tommykentner2 ай бұрын
We don’t have a full step by step but you have to fully remove the harness and sent it to IWire.
@rylanscheig86153 ай бұрын
Crazy how well that car hooks for how little it weighs, the other car woulda for sure won if it could hook up, I’m sure Leroy is geared terrible but just for it to hook
@tommykentner3 ай бұрын
They got it working for sure!
@dgo91213 ай бұрын
Stock internals?
@tommykentner3 ай бұрын
Built Rb26 no brace
@fritopendejo19333 ай бұрын
What boost pressure were you targeting?
@tommykentner3 ай бұрын
28 PSI
@941fishing33 ай бұрын
I bet mullet will be running a flat 6 by Halloween
@tommykentner3 ай бұрын
Yep maybe 5! 👊😎
@andyross16343 ай бұрын
terrible video - maybe get a tripod?
@tommykentner3 ай бұрын
Thanks for watching!
@Owensti3 ай бұрын
Does any one know what pin on the ecu I need to ground to put the ecu in manual mode?
@tommykentner3 ай бұрын
We sent the harness to IWire I think they have a diagram on their website.