Ballistic Products Inc

Пікірлер

@tomfisher47 Ай бұрын

Just arrived it's terrible

@ballisticproductsinc1934 Ай бұрын

We apologize that the product didn’t meet your expectations. Your feedback is valuable to us, and we appreciate your patience. Please reach out to our customer service team at 763-494-9237. We would be more than happy to assist you in finding a solution. Thank you for choosing Ballistic Products!

@johnhubbard6262 6 ай бұрын

Wow that Makita drill was an antique at the time of this video. Been team blue since they first came out, put that one on the wall when you upgrade it - Love it.

@DOWNFORLIFE954 8 ай бұрын

and you dont need vise i just hold it by hand

@DOWNFORLIFE954 8 ай бұрын

i timed him in video. 6 seconds spin drill to generate heat. and 5 seconds with pressure to roll the crimp over hull.

@DOWNFORLIFE954 8 ай бұрын

for everyone that is questioning direction. clockwise. and you need to practice. the pressure and timing needed to spin to generate heat and then more pressure to roll the crimp has to be exact. it takes practice. half ones i did come out great but if i dont time it perfectly the crimp comes out bad

@eduffy4937 8 ай бұрын

When loading .410 bore, when wouldca guy benefit from a 6pt crimp? Also when is an 8pt crimp best?

@ballisticproductsinc1934 Ай бұрын

The standard crimp for .410 is 6 pt. Unfortunately, with the very small dimensions of a .410 hull it is very nearly impossible to get a satisfactory 8 pt. crimp. We strongly recommend going with the 6 pt. in .410 (and 28ga) as it is much easier to form and save you time and frustration. Thanks for your comment!

@eduffy4937 Ай бұрын

@@ballisticproductsinc1934 excellent info. Thank you. Just trying to not have to buy every gizmo and gadget out there if ultimately it goes unused in the end

@eduffy4937 8 ай бұрын

How mec still provides presses with thier garbage crimp starter is beyond me....this thing is a god send for .410 hulls that are new

@toronadogofast7868 Жыл бұрын

It looks like there is a black one on the ponsness/warren beside it. How about you tell use the thread size a Pitch?

@FirearmOutfitters Жыл бұрын

I have a MEC600 .410 3” and I run this without the spring. The spring or a nut. Just the wing nut.

@badboytommy187 Жыл бұрын

Looks so flimsy

@johnanderson186 Жыл бұрын

👍👍

@sleeperno1215 Жыл бұрын

Just got one for my 12 gauge BP loads. Love it.

@FAA-DPE Жыл бұрын

Wow, he makes that look easy and foolproof. It ain't... I've found plastics used in import straight walled hulls just don't work well with this technique. Could just be me, but I feel it's in the plastics formulation.

@Oldmanwithagoldpan Жыл бұрын

Ya'll are missing out on an awesome source of advertising by neglecting this channel and not keeping fresh videos coming.

@guardianminifarm8005 2 жыл бұрын

Excellent

@guardianminifarm8005 2 жыл бұрын

Thanks

@twitchyrats5252 2 жыл бұрын

Goodness, 5 years and not a single comment?!

@zoneverter8537 2 жыл бұрын

Great Video !! Please keep making more such informative videos. I recently did a KEF Q150 Bookshelf speakers review on my channel. link for your suggestions and to learn from you, kzfaq.info/get/bejne/f8ejl9mdqbTeeqs.html

@kwkstar 2 жыл бұрын

I 3D printed a trimmer using a hobby knife for the blade!

@hoyt1198 2 жыл бұрын

Which is best for loading duck hunting loads the 6 or 8 crimper?

@toronadogofast7868 Жыл бұрын

All of the loading data and major manufacturers us 6 point crimps any time loading #6 and larger shot.

@pz1269 2 жыл бұрын

It looks like I'm doing the same thing with the drill but my hulls aren't rolling but twisting because of the heat generated. Can anyone help?

@ronaldfutch508 3 жыл бұрын

A drill press would seem to make a more strait roll crimp than would a hand held drill which could have a tendency to wobble.

@MesoTroniK 3 жыл бұрын

What length of barrel was this fired from?

@withoutfurtheradoforever 3 жыл бұрын

Your written instructions for roll crimping new hulls says counter-clockwise. Is the same crimp tool used, just running backwards?

@rachelgee7894 3 жыл бұрын

I made some American Flag and Don’t Tread On Me overshot cards. I’d love for you to print them and try them out. They turned out pretty sweet in my husband’s shells 👍 www.etsy.com/listing/902133326/overshot-cards-for-shotshell-reloading

@nancybarnes29 3 жыл бұрын

thank you dave and greg, you know i use a lot of your products, and i am always reassured that i am not alone when i hear a pithy comment from "the crummedgon". keep those loads comming and the phesants keep falling. robert & nancy @holland brook preserve. do a video on the importance of patterning your gun and load. not enough "sportsmen" do this, especially the young ones these days and its so very important.

@blueduck9409 3 жыл бұрын

Good video, now only if any products were actually available for purchase from BPI ..... 🤨

@abdulrehmanchoudhari4645 3 жыл бұрын

Please send me one

@pacanis 4 жыл бұрын

You would think the maker of the product would give you some information on shell prep/length.

@ryanripley8449 3 жыл бұрын

Yes yes chastise a company because you are too lazy to do your homework. Makes perfect sense

@Newtire Жыл бұрын

Any tips on distance between card or slug and top of hull. One person mentioned to do your homework but I can't find the teacher.

@johnreynolds6499 4 жыл бұрын

Pump up the volume!

@giggergigger1 4 жыл бұрын

Very boring presentation

@mohamedfaroukbalouli7809 4 жыл бұрын

Does it crimp all gauges?

@douglaswynn1391 4 жыл бұрын

Volume is worse than the "Hull Vise" video. I somehow mist how to measure or are their measurements on the device? Do you cut below the folds? I am giving this a thumbs down even though I like many of your products.

@douglaswynn1391 4 жыл бұрын

Gave you thumbs p even though the volume was poor. Probably sold one!

@douglaswynn1391 4 жыл бұрын

Sorry not 'p' rather up.

@douglaswynn1391 4 жыл бұрын

The volume is very low. Not my device how can we improve it. Just received a catalog and on the front cover it says "New Look Hull Vise" so I was searching for information or an updated video.

@edwardporter5905 4 жыл бұрын

Wow that guy is horriable.

@dalroache 5 жыл бұрын

sorry I still don't get it you attach something to a drill is it a special tool you need to make the crimping action please explain I am sorry if I sound dumb I am a guy from UK were not allowed things like you are in your country so I get my information and enjoyment from watching you guys I am learning slowly the other thing I'm picking up and learning about was a thing called a gas check I still not sure exactly but I know its to do with bullet because of high pressures etc.... have a great day stay blessed .....all way from the uk

@andrewlabarbera4534 5 ай бұрын

A roll crimper is a tool sold by Ballistic , I think around 20 some odd dollars

@MsPedross 5 жыл бұрын

Heey Ballistic products inc!! You could make an lead free copper version of load!

@caltick 6 жыл бұрын

Honestly I haven't done roll crimping but I did make a gizmo which might help some. This video is of my Hull trimmer. Nice video! kzfaq.info/get/bejne/fL6CfryduZfZm6c.html

@robertjordan8282 6 жыл бұрын

LOUDER PLEASE!

@weitzfc1 6 жыл бұрын

I use it on paper hulls , and plastic .

@gutbucket260 5 жыл бұрын

I use it on salami and summer sausage.

@douglaswynn1391 4 жыл бұрын

Well @@gutbucket260 how does it work? What length is your summer sausage?

@MrAutochamber 6 жыл бұрын

I am really new to this and I just bought a Taurus Judge public defender I want to re-load for. I am going to buy your tool for sure but what are you using for your clear card at the end of the crimp ?

@rooster3019 7 жыл бұрын

You say to run the drill CLOCKWISE, but your printed manual, "Slug Loading & Field Application" says "making sure the tool is turning counter-clockwise". Refer to page 21 left column, #5, second and third line. I have always use clockwise, but then again never got great results with your older crimper (the short one) in 16ga. Doing 12ga slugs now with your newest crimper.

@PresidentofAntifa 7 жыл бұрын

you think that this crimper would work on coin rolls?

@withoutfurtheradoforever 3 жыл бұрын

I posed the same question, just now. His example in the video is turning clockwise. The tech sheet I found on their website refers to spinning counter-clockwise with new hulls. It doesn't look like they monitor the comments section on KZfaq, however. Did you ever get an answer?

@rooster3019 3 жыл бұрын

@@withoutfurtheradoforever No reply. Experience has me rolling new and reloads hulls CLOCKWISE.

@tkarlmann 7 жыл бұрын

Other than the clear cover, you did not mention any reasons to do this. If I own a progressive press, this operation would slow my production rate to a crawl. What's the advantage?

@hisechapman1165 7 жыл бұрын

I'm interested in it because I don't load a lot and have a basic Lee Load All for loading target loads. I want to handload a limited number of slug rounds for hunting. I'll use the Lee to seat the slug and use something like this to crimp it.

@rooster3019 7 жыл бұрын

Even with a single stage, roll crimping off the press will slow progress to a snail's pace. Some people roll crimp because they think it looks "neat" or different than their friends' products. Some roll crimp cold weather hunting rounds because they think they get better ignition. Some roll crimp because it leaves more room in the hull for charge, wad, and load. Some people load for chambers that are of older dimensions, shorter than 2 3/4" and it takes quite some modifiacion to the crimp start station and crimp finish station on a press to accomodate that. I use roll crimps for the flatter metplat slugs for some of the above reasons. I load my target and shot payload rounds with pie crimps.

@Loot7425 8 жыл бұрын

Would this work on a lee shot shell press?

@Loot7425 8 жыл бұрын

Will this work with a Lee precision II shot shell reloader?

@anthonychavez3742 8 жыл бұрын

I like it.

@BubbaRountreeOutdoors 8 жыл бұрын

There you are Jonathan! It's nice to see you doing some vids my friend!! Wade

Ең жақсы KZfaq

Пікірлер