wayne miller

Пікірлер

@trevorfurlotte Күн бұрын

Wow! What an insane amount of work! Well done!

@waynemiller6070 Күн бұрын

thanks

@ryanp1356 10 күн бұрын

I bet you're loving it

@waynemiller6070 10 күн бұрын

You're right about that. I am definitely loving it! Flew 6 flights yesterday. Very VERY good, Really suits the kind of flying I like to do. I set up 3 rates. Initially flew mostly mid rates until KE spins or crank shafts, which were high rates. Now I'm thinking high rates are more than enough, so next time out I will be taming the high rates but still allowing for 3D. And maybe add even more expo. So I would only fly on one rate. (Like Martin Pickering) ;) Thanks for checking Ryan

@ryanp1356 10 күн бұрын

How ya making out with the plane

@BayonasRCWorld 18 күн бұрын

Really nice work and love the video. I love your thinking and application process. Happy flying my friend

@waynemiller6070 18 күн бұрын

@@BayonasRCWorld after all of that. I'm finding I don't like the plane very much. It was probably great in its time, but there's so many better planes now that I don't like flying this one.

@waynemiller6070 18 күн бұрын

It's really my fault though. I made it too heavy.

@BayonasRCWorld 18 күн бұрын

@@waynemiller6070yeah it is not your light 3D type bipe even if built as per instruction and plans with weight range. It is a great sport flyer with basic Aerobatic maneuvers but not your today's 3D flyer if you know what I mean. Nonetheless it is a fun build and great everyday flyer.

@BayonasRCWorld 18 күн бұрын

@@waynemiller6070you did great regardless especially for this specific model.

@ryanp1356 24 күн бұрын

Also I don't recommend plugging the ec connector to the xd. Use the same connector

@waynemiller6070 24 күн бұрын

Thanks again. My friend made me a 2 inch adapter with a spark arresting XT90, which I also use on my other laser.

@ryanp1356 24 күн бұрын

The second lead is for telemetry

@waynemiller6070 24 күн бұрын

Thank you. That's interesting. You mean like for ESC temp, Battery temp or voltage? I'm using an NX8 TX and an AR620. But I understand there is limited telemetry on the AR620 if you know how to get it. My buddy said the extra wire could be for additional power. I'm still pretty new to this electric stuff.

@ryanp1356 23 күн бұрын

@@waynemiller6070 I think so. I typically don't do telemetry. I like to keep things simple lol

@ryanp1356 23 күн бұрын

Doesn't give any more power. I do know that

@thenerdoligist1292 26 күн бұрын

Nice work! Thanks for the video. The best tool I have found for scratch building is a 3D printer. Solves the motor mount, battery hatch and cowl dilemma perfectly. I use On Shape modeling software that is free and lots of KZfaq tutorials are available. I’m in the middle of building a 1M version of the Ultimate Bipe

@waynemiller6070 26 күн бұрын

I can see how a 3-D printer would have worked really well. I could have used it for the cowl and the battery hatch. I'm sure there's a learning curve too in printing stuff, but I can see that the results may have been more professional for sure.

@thenerdoligist1292 26 күн бұрын

@@waynemiller6070 your plane looks excellent! Printing the “normal “ PLA is very easy. The design software takes a little time but I use it all the time to make things for the home too.

@waynemiller6070 Ай бұрын

Special thanks to my sister for all her support, and for recording the flight. Kudos to Megan Phillips from Brian Phillips RC. She takes such consistently remarkable flying footage while most of our footage is pretty much unusable.

@LouCosmeRC-ov2ol Ай бұрын

oh noooooooooo! wow such a nice plane. That's a shame.

@moshevidalyt 2 ай бұрын

It worked. Great video. Thanks Wayne!!!

@denisplamondon7391 2 ай бұрын

What’s the part number

@daleyashiro9695 2 ай бұрын

Wayne, thank you for this video. I had the same error code. You saved me over $1000,00. A local plumbing company wanted to charge me $1000,00 to replace the duel venture part. I was able to purchase the part for $85.00 and have it shipped directly to my door. It took me less than 45 minutes from start to finish. Thanks

@waynemiller6070 2 ай бұрын

KZfaq at its best!

@KathleenHelms-nq1vk 2 ай бұрын

To fast. I heard one you can actually hear all the words.

@waynemiller6070 2 ай бұрын

Fair point . Especially as I get older, that tempo seems too fast for me too these days. 🚔

@kellicrawford9751 3 ай бұрын

Hi there. After the tech replaces the dual Venturi, does he have to input a test sequence? Or does he just turn the unit back on and the test sequence will automatically run?

@waynemiller6070 3 ай бұрын

It must've automatically run. Once he turned it back on the code no longer flashed. I found it kind of strange that he not only did not even unplug the unit, he didn't even turn the gas off.

@kellicrawford9751 3 ай бұрын

@@waynemiller6070 thanks for your help!

@boxerpop82 3 ай бұрын

Repaired a good bit of these but never had to replace the ventruri. Wonder what caused it to go bad. You think it's worth getting a combustion analyzer to diagnose the error code 3

@waynemiller6070 3 ай бұрын

I don't know how much diagnosis was really necessary. Most of it was trying to figure out if you could avoid repairing or replacing the dual venture. But at 75 bucks for the part and a half an hour for the labor. Just get it done.

@waynemiller6070 3 ай бұрын

I don't know what a code 03 is.

@Albany1226 4 ай бұрын

How do you test the dual Venturi before ordering to make sure it’s actually defective? Can you post that video?

@Albany1226 4 ай бұрын

I’m getting an e012 code - replaced the flame rod cleaned air filter. Heard this code can be associated with this part

@waynemiller6070 4 ай бұрын

@@Albany1226 I believe that's the code I was getting as well. If it can be a few other things, and most of them were related to the venturing tube. the venturing tube was like 75 bucks. And installation is free if you just follow the video. It might be the easiest fix.

@waynemiller6070 4 ай бұрын

I paid the HVAC company 150 bucks to come out and tell me what I already knew. I was thinking they would have something like that on their truck and fix it that day. When they said they were gonna have to order it, that's what I said I'll order it myself because I knew it was gonna cost more to order from them. I did pay them again to replace it, and if there had been a video like this showing me how to do it, I would've done that myself too. Hope this helps. Good luck

@gladejustglade 4 ай бұрын

Very enjoyable! Nice work.

@waynemiller6070 4 ай бұрын

Thanks for checking it out Glade.

@madatthesky7588 4 ай бұрын

Great video, Wayne! This project came together very well and the video and narration are top notch as always! Thanks for sharing!

@waynemiller6070 4 ай бұрын

Thanks again!

@zlajatube 4 ай бұрын

bravo, the sound is perfect... the trouble with adjusting the HD500x sound directly in the mixing board brought me here and now I can see that it can be adjusted, the question is still how? :)

@waynemiller6070 4 ай бұрын

Do you have an HD 500 X? If you do I will share a patch with you that will allow you to play your guitar through one chain, plug your mic into the mic input through another chain and run your backing tracks into the CD input.

@FranksModelAviationWorkshop 4 ай бұрын

I’ve never own any electric planes. Have a few electric helis, but all the equipment came with the kit. Converting to electric confuses the brain, so I’ve been converting from glo to gas. Cool vid! !

@waynemiller6070 4 ай бұрын

Thanks

@propgear123 5 ай бұрын

Awesome stuff Wayne very cool bud 🔥🔥🔥👌🏼

@tamarabradshaw4799 6 ай бұрын

Cool cover Mark Farner is Grand Funk!

@waynemiller6070 6 ай бұрын

Thanks. One of my favorites since I was a kid.

@drav8r5651 6 ай бұрын

how is the vertical performance with this power package? would you be able to hover and do other 3D maneuvers? Very nice video. I have an old U Can Do that I would like to covert.

@waynemiller6070 6 ай бұрын

Vertical is really good. Control surfaces on my plane are a little lacking. I bought some larger servo arms. But I haven't installed them yet. It should give me more throw. It will definitely hover as far as power goes but I wasn't good enough last year to be able to hover for very long. This year will be better.

@waynemiller6070 6 ай бұрын

I might actually replace the servos themselves to get stronger and faster control surfaces. Hopefully it will 3-D better then. To be honest, it was one of the early "3-D" models. But there are planes today that are far superior as far as 3-D performance.

@waynemiller6070 7 ай бұрын

I'll explain the conversation. A couple of weeks prior to this Robert was on the phone with Navien making sure all of the preliminary tests were done. He was on hold for a couple of hours. Knowing that it could take that long he got on hold with them at my job because he was going to need to call them on his next job and he wanted to get in the queue ahead of time to save time.

@user-bo4wd6jf4t 7 ай бұрын

Maybe explain what you are doing

@waynemiller6070 7 ай бұрын

If you read the description, you'll see that we are replacing the dual venturi. There were a couple of items on the old one that needed to be swapped over to the new one.

@Bill-uc8mx 8 ай бұрын

Thank you so much!!!

@waynemiller6070 8 ай бұрын

Sure. Sounds like this helped in someway. 👍🏻

@waynemiller6070 10 ай бұрын

DEWENWILS Was kind enough to send us a replacement transformer in a timely manner. Their customer support simply needed information to determine that the problem was something that would be resolved with a transformer replacement. This video was simply a demonstration of the issues we were having so DEWENWILS could see the issue. We thank them for the prompt attention.

@waynemiller6070 10 ай бұрын

I've been thinking about making this video for a long time since it seems every time I go there I DON'T find what I'm looking for. LOL

@RC-Air 10 ай бұрын

Excellent work on this video! This is a keeper!

@waynemiller6070 10 ай бұрын

A friend of mine came over the other night and we got into real flight evolution and replaced the motor in the u can do with an electric one. The flies pretty close to the real model. If I figure out how to offer a downloadable version on the forums, I will let you know.

@omkarmore1704 11 ай бұрын

the voice over is soo good man 👌

@omkarmore1704 11 ай бұрын

beautiful

@madatthesky7588 Жыл бұрын

Fantastic video sir! The narration and description of everything was wonderful. Would definitely watch more videos like this! BEAUTIFUL plane!

@waynemiller6070 Жыл бұрын

Thanks madatthesky, I finally documented something. 😁

@TheRockinDonkey Жыл бұрын

Who knew George Lucas could jam?

@waynemiller6070 Жыл бұрын

Ha. I can see that.

@biancamoore413 Жыл бұрын

👏😃👍🏽🔥🎸💨 you were so good so good

@stevehunley1987 Жыл бұрын

Great video Wayne. We just got one of these and we are having one issue: the rudder and nose wheel are not aligned on ours so when we taxi it veers to the right. Is there a way to loosen the nose wheel mechanism and trim it so it's straight? Thanks.

@waynemiller6070 Жыл бұрын

Hi Steve, Yes, center the servo so the rudder is straight. The servo arm has two sides. One goes to the rudder and one to the nose wheel. Loosen the screw holding the pushrod going to the nose wheel. Straighten the nose wheel and re-tighten the screw. Hope that helps.

@stevehunley1987 Жыл бұрын

Thanks Wayne. Will try that.

@deborahhewitt6101 Жыл бұрын

I love it!!!! Great stuff ❤

@antalkatona7872 Жыл бұрын

Great like always!! 👏👏👏

@boostismagic Жыл бұрын

You had ONE job, Wayne!

@waynemiller6070 Жыл бұрын

HA! You're telling me.

@hans1970 Жыл бұрын

4:17 💥 really nice!!