@@GrampyCampy no we do not. We don’t use cheap hardware and we don’t short cut on firmware. You get what you pay for. For us we would rather cost more and create a good product then be cheap and offer a bad product.

@@ElJugoSb then that feature doesn’t work. The radio and the rest of the features will all work normal.

@@nickyrat we reposted it with the music changed. The music is only messing up on certain devices for what ever reason. The link is in the description

@@Thir_D_Three press the RST button on the face of the radio with a paper clip

@@LinksWellInc First off.. Dammage, never knew that was there! Always in the drivers seat and didn't see it. I was pressing and holding all the soft buttons trying to do that very thing. Thank you, It worked. I will respond to tech support. Much appreciated.

@@Thir_D_Three no problem.

@@corpzghostt4200 yes it does

@@brimariesmiles yes it does.

@@LinksWellInc thanks! Just had a recent install but it wasn’t completed, so I’m shopping around for other authorized places to finish it and wanted to be sure to ask for the CD player as well. Thank you!

@@mickeycook569 check the different source gain controls in the radio settings.

@@Marshall421 you can check www.Americanmuscle.com they may have some old stock of them. We do not manufacture this anymore. We only make our 12” T-Style for the Mustang now.

@@Boogra possibly but I would use a USB dongle one. The Bluetooth on the radios main job is handless calling and streaming. Not to be controlled.

@@LinksWellInc Awesome idea. Thanks, man. I had the Linkswell 5 for my Jeep and sent it back and am getting ready to have the 6 installed. Very excited about that upgrade. Did you guys ever have any report skipping when listening to music (this was on the 5 for me, and pretty much every song), where the song would seem to miss a half second or so once in a while?

@@Boogra so depends what. Wireless CarPlay actually has a big issue with WiFi interference on every radio. Factory included. It’s an issues with the tech currently.

@@LinksWellInc That was the reason why I returned it - that and the fact that the reseller wasn't factory authorized, so it made me nervous. I'm getting the 6 now from a really great guy in Nashville. He states that the processor is better and that the whole movement of the pages and apps is much much smoother.

@@parkerj7461 it adjust the SUB RCA preout. It will not adjust any factory subwoofer.

@@jamesthrow4863 jump on our website and use the chat icon to email our techs. Ask for a different version the app. Since the video some of the newer Gen radios the app crashes and needs a special one

@@robinparker99 so we actually do not sell anything on Amazon or to the retail public. If there is a shop selling our products on Amazon it is not us. So what they sell has nothing to do with us outside of us selling them the product. What they buy from us and sell we do not decide. You can reach out to www.adcmobile.com they are one of our biggest online dealers. They will sell you the product and give you the customer support the Amazon shops never do.

@@AlexHuston-kr4nt so understand our techs primary job is not retail customer support, but are here first for our authorized dealers. If you need help your authorized dealer is your source for help first. If they need help in helping you out guys are ready for them. So if you are after getting support quickly you need your contact your selling dealer. We have email/chat help to try and grab the few we can but our tech team is not nearly big enough to help all end users and our dealer techs will always be helped first. We help/train our dealers so if their customers have any issues they can assist quickly, and in person. When we train a tech we train them to help multiple end users, when we help an end user we have to help all of them. For us to do this we would have to triple our team and so price for our products. This is the best way for all involved. Our team will respond when they can (also as long as the email actually went through, they get lost inside the website system sometimes) or hit up your dealer.

@@z-zociety-family4045 nothing for that older super duties. There are to many variables we wouldn’t be able to produce one radio it would take multiple. It would also cost us a ton to develop due to the trucks no longer being manufactured. At this point the overhead is way more than we can justify.

@@chavito2483 completely different function and look. But if you prefer that route Velcro away.

@@chocoescobar777 is it our radio? If so what Generation is it?

@@aaronmccoy5323 probably not. Most of the 2024 trucks have the new dash. If it’s the new dash it will not work.

@@MohammadHarisMania is this our radio? Or is this a different manufacture’s radio?

Its your radio, are there any settings that i have to change, all works well, even static wallpaper remains save, but only live wallaper from a third party app reverts back to default radio's wallpaper after fast boot (sleep mode ON)

@@MohammadHarisMania run the latest APP and MCU updates. There was an update way back that fixed the live background retention

@@LinksWellInc alrighty maybe its the software issue ill update you on it shortly 👍

@@LinksWellInc just wanted to comfirm that you 're also refering to a gen 6 not xl?

@@Rileypbbcc so not wirelessly because the phones keep locking it down. But if you use our HDMI input adapter. You can plug your phone in using the appropriate HDMI adapter and then mirror your phone that way. 95% of the time casting though isn’t necessary because you can just install the app on the radio itself and run it native on the radio apart from your phone.

@@arctodus5811 available now. Just need to contact one of our Authorized Dealers.

@@Tobz.X what Gen radio. What make model vehicle? What protocol is it set to?

@@aloysiusssali4204 so long as the dash is the same as the one in the video. It should yes.

@@johnmcginty515 so if it’s a 2010 that isn’t our radio. We don’t make one for that model vehicle. So unfortunately we wouldn’t be able to help get it going. You need to contact the manufacturer of the radio.

@@TheLaughlin82 couple things. Try what I mention in the video. Make sure “Factory Amp” is turned off in System Settings.

​@LinksWellInc factory amp is off. I've gone thru all your videos. And every setting I can find. Max volume on this radio is 40 and with it all the way up and my doors open in the quiet country I can barely hear the music. 😢 so driving down the road sucks barely hearing it and the forbid I roll down a window it's a fail

​@@LinksWellIncok wierd thing just happened. I turned my radio down to 26 and Major clear volume...I'm so confused going back up to 40 volume decreases.

@@TheLaughlin82 so go to “Car Settings” in there is the factory amp settings. Adjust the volume and gains in there. See if that gets you more volume.

@@MarkTMueller I would try first letting the DSR one try before you change it. If you want to try better signal use our TOSLYNk output to the DSP.

@@melvinroberts9263 if you jump on our website there is a find a retailer tab. You just input your zipcode and it will list out our authorized dealers closest to you.

@@RockyBalboa-f3b yep the 3 toggles become button that are set around the screen just like the hazards. The only toggle we do not have is the exhaust one for the high end Cobras.

@@parkerj7461 so how is the signal to the amp connected? What amp is it? If you have the gains too high on the amp it will often produce white noise or static sounds.

@LinksWellInc it was hooked up to the pre outs on radio itself but the static noise was even worse so it's hooked up to a line output converter. And it's a deaf bonce 4 channel amp

@@parkerj7461 so I have never heard of that brand of amp. I would try adjusting the amps gains and see if you can get the noise down.

I have the same issue

@@tzaromega2317 so it could be that the factory amp eq is messed up. Did you flatten the EQ on the factory radio before removing it?

@@xtsmbayi3028 unfortunately no. Only left hand drive Ranger.

@@mellokevt1669 we have 3 Radio options on our website for the Ranger. Generation 6 www.linkswellinc.com/products/radios/t-style-radio/the-t-style-radio/generation-6/2018-up-ford-ranger-generation-6-t-style-radio/ Generation 5 www.linkswellinc.com/products/radios/t-style-radio/the-t-style-radio/gen-5/2018-up-ford-ranger-generation-5-t-style-radio/ T-Style LITE www.linkswellinc.com/products/radios/t-style-radio/t-style-lite/2018-up-ford-ranger-t-style-lite/

@@gabeharper9793 because it can’t. The communication between the radio and cluster is not able to be retained with our radio.

@@matthewkorinchak6725 what radio do you have? What Generation is it?

@@LinksWellInc LINKSWELL Gen IV T-Style 12.1 Inch Radio for a 2015 tundra

@@matthewkorinchak6725 that is why. Wireless is only for Gen 5.

@@LinksWellInc okay thank you.

Just email me. I don’t know why the chat isn’t live. [email protected].

@@LinksWellInc email sent.

@@johnclaude9468 same. Responded. Best of luck. You should be good to go now.

I have responded to many as well. Contact Automobility. They are our Canadian Distributor. They can connect you with a dealer up there.

They are Android based yes. You can see some of the Android features in some of our other videos. So we have a distributor in Canada by the name of Automobility. If you contact them they could check for the closest dealer to you.

So you would contact your authorized dealer. They are your support and we are theirs.

You can purchase from any of our Authorized Dealers. To find a local one use the find a retailer tab on our website www.linkswellinc.com. As for installing yourself that depends on your ability to work on a car. We have an install video on our channel.

Try again, sometimes a mistype happens or the chat program losses the email and it never makes it to the techs. I would try once more

So are you doing that through CarPlay/Android Auto or Bluetooth?

@@LinksWellInc I believe android auto

No. We don’t retain any of the factory SYNC or radio parts. Doing that would limit the features we could add and leave us vulnerable to issues caused when Ford updates the SYNC. So to prevent issues, control quality, and add features SYNC is removed.

No. We don’t retain any of the factory SYNC or radio parts. Doing that would limit the features we could add and leave us vulnerable to issues caused when Ford updates the SYNC. So to prevent issues, control quality, and add features SYNC is removed.

From any of our Authorized Dealers. To find one you can use the find a retailer tab on our website. www.linkswellinc.com

If you want to mirror you need to get the HDMI adapter and use the HDMI in

ZLYNK is not our app. It’s a 3rd party company’s app that we purchase and use. We have no control over any updates.

@@LinksWellInc So, what does that mean? I didn't get the update directly from them. And it'll work

@@stephensfida7816 it means the ZLyNK update for the hardware on our radio will be different then the update for a radio with different hardware. Since they are their own company all we can do is give reports of issues and wait on them for updates. We have no control over when.

@LinksWellInc You know guys. I love your radio, but it would be nice to be able to update key components and software of the radio. Is there any way you can reach out to these people? And get them to send you the update for the appropriate radio. Thank you.

@@stephensfida7816 so that is what we do. Apologies if I am not being clear on it. That is what I am trying to communicate. With the .34 version we have reported to them the issues we have with it. We continue to ask for an update to address the connection issues and what not, but we can’t do more than press them because it isn’t our update to create. So over the couple years working with them we have moved from .16-.34. So updates have come out as phone updates shift. Eventually this will be the same as we step past .34. But we have no control on the time line for that.

Steering wheel controls yes. Where does the cross traffic alert show up? Cluster or dash?

XLT center cluster

@@markcope9853 should stay the same

So it’s just the way AT&T network works. It’s going to be a pain. We have a few processes that you can try to get it to work. If you email the tech’s using the chat icon in the website. They can get you the little tech sheets we have if you want to try.

So our contact email is only for dealers looking to talk becoming a dealer. So that email if you sent anything tech support it will not get to techs. In the website in the lower right corner is a pop up Chat icon. Use that during business hours and it goes straight to the tech team.