This is the best fence job i've ever seen and i've seen a few
@wintercoder668715 сағат бұрын
I've never had to scrape off dry concrete from the back of a mixer... because I always remember to put that first 1-2 gallons of water in before the first bag of cement.
@OakleysDIYHomeRenovation10115 сағат бұрын
Did that and still had the same issue.
@sebastjansslavitis3898Күн бұрын
if long life is your main goal why don't use metal pipes? sometimes at scrapyard you can get them for cheap. I have fence like that with my neighbor, its been there all my life (35 years), wood has been changed multiple times, but posts still solid (of course I don't know where he got them, maybe they made from some special metal)
@KISSGreatestFanКүн бұрын
Thanks!
@OakleysDIYHomeRenovation10115 сағат бұрын
Thank you, glad you liked it. Thank you for watching.
@timothyconnecticut1910Күн бұрын
I think the water is creating a suction, making it more difficult.
@christopherhanrahan1171Күн бұрын
I agree it does look nice. That being said, I hope you don't live anywhere where it freezes. That poured block gives the ground a lot to grab onto and when the ground freezes it can heave the post.
@philbuck3652 күн бұрын
Also you can coat tar on your posts were they contact the concrete . I like to use a 2x6 form it’s stiffer less flexing strips better& gives a bit more Heights which helps to keep the grass from growing underneath the fence from one side to the other
@philbuck3652 күн бұрын
I am a concrete formwork, carpenter. What works for me is to put some form release oil on your forms before you pour . and then I wait till the next day after the pour to strip them. and they don’t stick due to the oil.
@OakleysDIYHomeRenovation101Күн бұрын
Yeah I was lazy and didn't do that but on all the other pours I put vegetable oil on the forms and it works pretty good. Thanks for watching.
@salempoor6783 күн бұрын
Waste Of Time
@SparkyBangers3 күн бұрын
You can’t rein electrical conduit at that depth
@pottsch3 күн бұрын
No doubt this guy is an engineer by trade
@OakleysDIYHomeRenovation1012 күн бұрын
No but probably should have been. Thanks for watching.
@lindamcneely3 күн бұрын
I bought some spray pain in cans and hopefully I can tape it off so that I won't have to remove the door. will sand it but will not use primer. don't think I need it with the spray can paints. will see what happens. nice job.
@OakleysDIYHomeRenovation1012 күн бұрын
Sounds great!
@ceedub73743 күн бұрын
In theory thats nice. However the ground in my part of the country if full of rocks and I cant go 2 feet in digging without hitting them.
@OakleysDIYHomeRenovation1012 күн бұрын
very true and that would suck to dig in. Thanks for watching.
@Zeric12 күн бұрын
Yea, that wouldn't do a thing where I live either. People posting stuff like this really should say what type of soil their "method" is designed for, as trenching is situational, not universal. Fortunately I skipped ahead and didn't waste too much time on this video that is irrelevant for my area.
@the_cursor3 күн бұрын
16:33 - You got them black panthers roaming around so that's why you need that extra strong fence.
@kaizer-7773 күн бұрын
Can't they be refilled?
@jameswest30213 күн бұрын
My yellow wood lasted about 4 years in clay. I'm thinking DIY fiberglass, rebar and concrete post
@AlexAutrey4 күн бұрын
Dang almost perfect work wish you had used a metal post bracket on top of the concrete so the wood won’t rot because that’s going to be a nightmare to dig up again for someone.
@phaZe04 күн бұрын
Looks beautiful. I'd say better than a lot of professionals. Great job
@OakleysDIYHomeRenovation1013 күн бұрын
Thank you, and I would agree based on the couple neighbors that have had "professionals" replace there fence. Thanks for watching.
@pierred36324 күн бұрын
I work with wood even protected types they all start to show decay after 10 years or so for a lifetime fence nothing beats a nice heavy gauge frost fence now they got the white ones who looks way better than wood after just a few years , especialy at the insane price off any wood products
@carnold.knowledge4 күн бұрын
A few things to keep in mind: 1. The only way to see if a filter is causing too much airflow restriction is measuring your static pressure with manometer. 2. A new filter might not restrict too much airflow, but as they get clogged with particles, often the higher MERV rating ones can restrict flow more quickly. 3. The primary purpose of filters is to protect the equipment, but using a Fiberglass filter as recommended by some HVAC guys, can allow more dust to accumulate in your system. So it's a balance between too little filtration/high airflow and too much filtration/low airflow. 4. If you can, using a 2" or 4" filter of a given MERV rating, will provide more airflow than a 1" filter. This is difficult for those with 1" ceiling return filter setups. 5. I have gone with a MERV 5 to 8, until I can get my manometer in place and do some testing. Seems like a reasonable balance. 6. If you really want clean air for health reasons, consider a dedicated room air filter system (the Swiss make some very effective ones, but are expensive).
@mr.e70224 күн бұрын
It works on operating valves, what about burnt out valves or valves stuck open or the valve is buried deep or there is excessive traffic noise? A hundred bucks for a it? Why not have a person just flick on and off at the controller?
@jgrmtnjgrmtn39545 күн бұрын
Too hard
@Grggeorge5 күн бұрын
Well when the posts rot you got more problems good thought but bad work
@davidpereira2105 күн бұрын
Can you show how you set the 4x4s on the concrete square
@OakleysDIYHomeRenovation1014 күн бұрын
kzfaq.info/get/bejne/Z7-epZuJx57IqWw.html Thanks for watching.
@Grggeorge5 күн бұрын
Well that last looks like you need to pay someone to demo it out and do it right
@dylanharris59755 күн бұрын
I'm planning on using mine for a carburetor air box on my bike when it's empty🤙
@davepane73065 күн бұрын
I guess everyone is different in where they choose to prioritize their time and/or money. Seems like this project was pretty personal for you and your past experiences.
@scoho20006 күн бұрын
This tool is more than $200! Cost less and easier to rent the trenching machine.
@Scott.Farkus6 күн бұрын
I like the fence, and the idea of building things to last; the HOA is a deal breaker though.
@OakleysDIYHomeRenovation1015 күн бұрын
Thank you, yeah unfortunately where I am in Texas unless you are out in the country 99% of it is HOA. Thanks for watching
@galenmoore-ly6in6 күн бұрын
Yup I'm anal, ocd,over the top 😊 nice work don't find quality much anymore these day's
@sov198719876 күн бұрын
This is rhe kinda diy that i prefer just to watch 😂😂😂
@gregfaris69597 күн бұрын
You could also teach a fifth-grader how to draw a simple map that indicates where all the things are at the time they're installed. Matter of fact, that would be a very good thing to teach a fifth-grader!
@GeorgeWashingtonLaserMusket7 күн бұрын
This is absurd, it's insanely over built; frankly it's kinda impractical. It's beautiful never change you wonderful madman. I know what I'm doing if I ever own land now!
@troycadotte7 күн бұрын
Are you shutting off the water to do this?
@OakleysDIYHomeRenovation1016 күн бұрын
yes
@JerryD98B7 күн бұрын
He has too much time on His hands … 😅
@rodgerrabbit29558 күн бұрын
You gonna paint wearing them black clothes....?
@lasancemcclain33399 күн бұрын
Great Job!! 💯💪😇
@OakleysDIYHomeRenovation1018 күн бұрын
Thank you, thanks for watching.
@plandl19 күн бұрын
Thats why i build manifolds to keep the valves next to each other
@gilly02289 күн бұрын
put all the pickets up then snap a sting line....
@gilly02289 күн бұрын
2 buh 4
@gilly02289 күн бұрын
could have rounded the edges
@MichalK_Photo9 күн бұрын
the reinforcement is too large in relation to the hole in the ground (or hole too small). The concrete should cover them by at least 2 cm around them. Yours probably touches the ground below.
@thebordernow10 күн бұрын
First time I've watched this guy. Although he self-professed being Anal and OCD, I appreciated his attention to detail, and wanting to do things as perfectly as possible (but he was willing to accept it when it wasn't, which is a healthy and admirable work ethic). One question: What the heck is that giant stack of lumber for at 9:08 ?? Is it his fence pickets? Still seems like too much for what's shown built in the video unless he's doing both sides and then has more fencing to do...
@OakleysDIYHomeRenovation1019 күн бұрын
That is the pallet of pickets I am going to use. Thanks for watching.
@ml311010 күн бұрын
Nice job! That looks brand new. ❤
@OakleysDIYHomeRenovation1019 күн бұрын
Thank you, it still looks pretty good after a year also. Thanks for watching.
@emptyhooks10 күн бұрын
This reminds me of doing projects with my dad. His attention to detail / striving for perfection used to drive me crazy. I'd always want to get the job done and move on to something more fun but nowadays I appreciate the "ocd" like tendencies and all that I learned back then. I learned a lot from this video as well. Thanks.
@OakleysDIYHomeRenovation1019 күн бұрын
Glad to hear you learned something from your dad and this video. Thanks for watching.
@allguard00110 күн бұрын
DIY man after my own heart! Great job, brother! If it’s worth doing, it’s worth doing right.
@OakleysDIYHomeRenovation1019 күн бұрын
You got that right! Thanks for watching.
@parranoya10010 күн бұрын
What would you do if you had to build a section of fence on the property line strong enough to withstand the neighbors 3 story tall clumping bamboo when the wind blows it?
@OakleysDIYHomeRenovation1019 күн бұрын
Have my top rail at the same height at the top of the pickets. Thanks for watching.
@DennisFahlstrom10 күн бұрын
Presumably, you’re going to fill in the sides with dirt so all that concern about the appearance of the sides is wasted worry.
@kayakdog12110 күн бұрын
I Wonder if this would be useful in burying 12 inches of hardware cloth along my property line to keep moles from burrowing in from my neighbors yard. They always seem to come from that direction and close enough to the surface that their tunnels raise the grass up.
@OakleysDIYHomeRenovation10110 күн бұрын
I believe moles are eating the grubs in the dirt, try putting something on the lawn that kills the grubs, I know it isn't your yard but if it gets rid of the moles might be worth the few bucks. Thanks for watching.
@shang0h10 күн бұрын
I feel like this video is something a lot of DIYers need to see. The feeling is that as an amateur you're somehow ruining or devaluing the house as we learn on the go, but if you're concerned enough to worry about it (enough to watch someone put rebar in fence post footings!) then seeing how shoddy these "starter" houses are built, our over the top efforts sealing and protecting our little projects installing outdoor outlets and the like are probably actually reducing air gaps, straightening drywall, putting in blocking and insulation that actually fits the span and making our homes more protected than they came. Thanks for making this, I could listen to you talk about paying money and getting crap for it for a full hour.
@OakleysDIYHomeRenovation10110 күн бұрын
Thank you, It amazed me at how crappy these houses were being built but they are BRAND NEW. Thanks for watching.