Thanks for your video it really helps God bless you and your family and friends
@jarretwaldman368512 күн бұрын
Truck looks sick 👊
@TheBlueGarage12 күн бұрын
Thanks man!
@user-rr1su5xd5j16 күн бұрын
What did you do for muffler delete?
@TheBlueGarage15 күн бұрын
I just took it into the local muffler shop and told them to cut the flapper valve and the muffler off, then added a straight pipe.
@RBUSA196920 күн бұрын
Amazing how similar your truck is to mine. Cool truck.
@MichaelHolder-j3r27 күн бұрын
Can you provide a link for the ReadyLift SST?
@TheBlueGarage23 күн бұрын
Yessir, it is in the description below.
@MichaelHolder-j3r27 күн бұрын
Can you provide a link for the ReadyLift SST?
@TheBlueGarage21 күн бұрын
It is in the description below. If that does not work, then I got it from Amazon “ReadyLift SST Trail Boss/AT4”
@buzzsaw634128 күн бұрын
Crap paint job
@TheBlueGarage23 күн бұрын
Thanks for your feedback 🤙🏻
@FloridaBoatRamps-8829 күн бұрын
How much are those!!!
@TheBlueGarage23 күн бұрын
Prices very, based on their current offers, but the link is in the description below.
@mach5jeepАй бұрын
How do they look at night? Are they backlit?
@TheBlueGarageАй бұрын
They look great, and, yes, they are backlit.
@nrxhavocАй бұрын
lmao that thing has the AC condensation drip on the ground already. not a big issue but highly annoying. bought a used 21' TB LT with a 5.3 (same truck) in March and its been doing the same since.
@robertmedina2973Ай бұрын
How much mpgs decrease you get out of the throttle response increasing ?
@TheBlueGarageАй бұрын
Honestly it just depends on how much you lay off the throttle. It didn’t make any change on its own.
@fernandocg7859Ай бұрын
beautiful lights,
@TheBlueGarageАй бұрын
Thank you! 🙏🏻
@SGTMarineАй бұрын
Thanks for making this video, it was a big help! I was able to install the switches in about 3 hours without any problems.
@TheBlueGarageАй бұрын
Nice, happy to help! You’re welcome, and Semper Fi!
@lbzmx213Ай бұрын
Do you know if a dual row light bar will fit or will the second row be blocked by the grill in essence making the second row useless? I’m going to be doing this modification no matter what but I’d like to do a dual row light bar if I can
@TheBlueGarageАй бұрын
I have seen pictures of people with the dual row, so I’m pretty sure it would work.
@elbassman416Ай бұрын
My last tire wont read 😢 any ideas how to fix ?
@TheBlueGarageАй бұрын
My guess would be that something is wrong with the sensor, assuming the others programmed just fine.
@elbassman416Ай бұрын
It finally worked thanks for the reply
@ThatWideZ712 ай бұрын
Is it big for a s23 Samsung
@TheBlueGarageАй бұрын
Great question, I honestly wouldn’t know.
@raraiza922 ай бұрын
What is your height for truck comparison?
@TheBlueGarage2 ай бұрын
Off the top of my head I don’t remember. I have since traded this truck in.
@WOLF-qq2cn2 ай бұрын
Mine show up tomorrow i think i got the wrong one i dont have that storage.
@TheBlueGarage2 ай бұрын
I guess now you need the storage?
@raydlr7252 ай бұрын
Lookin good bubba
@TheBlueGarage2 ай бұрын
Thank you!
@throttleNthunder23212 ай бұрын
With it full in the up position, do you still have views from the cameras on your third brake light?
@TheBlueGarage2 ай бұрын
Yes, it doesn’t block anything.
@Bruh-tq1df2 ай бұрын
Did you put on spacers or did it not need spacers to clear ball joints on upper control arm?
@TheBlueGarage2 ай бұрын
No spacers needed
@user-kw3yu8ni3z2 ай бұрын
Can you change the colors?
@TheBlueGarage2 ай бұрын
Yes, through the Opt7 app.
@dark-aludemon31692 ай бұрын
“Fitting” 😂
@TheBlueGarage2 ай бұрын
Haha I wish it were easy to come up with the words on the spot while recording. Still so strange talking to the camera at times. 😅
@garyallen52972 ай бұрын
Well you showed all the easy parts except how to get the switch on off button thru the firewall that’s the hardest part of the entire process
@TheBlueGarage2 ай бұрын
Use a coat hanger. Sorry I ran out of daylight that day. Should have waited for the next day to film it.
@chinito30943 ай бұрын
Did you ever consider smoked tail lights(Recon) instead of stock Red LED’s to flow with the rest of the truck’s black accents?
@TheBlueGarage3 ай бұрын
Early on I did, but never when with them. I might got that route on my ZR2. I have a video, installing those on my buddies Red Trail Boss, they looked incredible.
@TonyVerduci3 ай бұрын
Hey bud I bought a new 2021 Trailboss custom. To all your followers please check , Roof Rust in middle down to metal 5”x 5” not something you can see unless u looking down on it from a balcony which I did in May 2024. I’m getting rid of mine back to dealer
@TheBlueGarage3 ай бұрын
This is a new one to me. I have since moved on from this truck and upgraded to the ZR2. I’ve already had to use the manufacturer’s warranty for a rattling rear window. They replaced the entire thing for me.
@thomaswu58193 ай бұрын
My 2019 <60,000 mile silverado just blew the engine due to the valve train and most likely the DFM and valve mentioned on a lot of reddit posts, now im looking at the pulsar which is recommended by many. And due to the gm parts shortage, especially truck parts, i was without my truck for a good 3 months and only had a rush order because i contacted gm customer care and opened a BBB auto claim. Your video helped clear a lot of things up and thnx for the discount.
@TheBlueGarage3 ай бұрын
Sorry to hear that. It’s definitely worth it! I wish they made the Pulsar LT for my ZR2, hoping I don’t run into the same issue you had.
@xGR1MxREAPERx3 ай бұрын
Your truck has no idea what your getting. You have different tires so your miles and mpg in truck are completely wrong. You need to hand calculate. My truck once said 31.9 and calculating the actual it was 22.4 lol.. so dude check it with math don’t trust the truck especially when you have changed tire size and stuff as it uses stock sizes to calculation
@TheBlueGarage3 ай бұрын
This truck was calibrated with the Pulsar LT for both tire size and TPMS. I think a lot of this was a result of drafting behind a 26ft truck while moving cross country.
@BC_Hunter3 ай бұрын
Are there any shocks or coilovers that work with this 2” lift?
@TheBlueGarage3 ай бұрын
I am sure there is a coilover setup that replaces the stock 2” Trail Boss lift and also adds another 2”. I honestly didn’t look into it. I have that planned though in the future on my ZR2.
@kylebelcina3 ай бұрын
Where did u get the hood brackets?
@TheBlueGarage3 ай бұрын
It’s in the link in the description. They were meant for a Tacoma, but fit the Silverado perfectly.
@angelmn59004 ай бұрын
I barely bought a 2020 Chevy and they told me that it doesn't pass inspection. That's why it has an adapted. I need to disconnect it so that it can pass inspection.
@TheBlueGarage4 ай бұрын
Interesting, at least you can plug it back in after passing.
@danielbonner83094 ай бұрын
That looks real good!! I have a Custom in the same color. Ive been wanting to swap the grille out like yours . I love the Chevy script across the custom grille but hate the bare plastic look. What brand is those gloss pillars?
@TheBlueGarage4 ай бұрын
Thanks man! I appreciate it! But the pillars aren’t glossy, could just look that way in the photos and video.
@danielbonner83094 ай бұрын
@@TheBlueGarage I made this comment on a totally different video and somehow it went to this one. Weird . My bad. Your Truck is 🔥 though.
@TheBlueGarage4 ай бұрын
That is weird, thanks man!
@gregoler92114 ай бұрын
hi my name is greg how tall is your garage door your truck fits in or how many inch is your truck from the gound to top of the cab
@TheBlueGarage4 ай бұрын
Hey man, off the top of my head I don’t remember the height of either. I have since traded my truck in for a ZR2, and moved.
@raullazo94415 ай бұрын
Thanks !!
@TheBlueGarage5 ай бұрын
Anytime!
@scottgill11085 ай бұрын
Not sure if you have added wheel adapters at a later date but I did not see that you had in this video. Sick build but this is such a crucial low cost step that can’t be skipped. Start at the 5 minute mark of attached video for an excellent explanation. kzfaq.info/get/bejne/a76eqLR4mpO2mZ8.htmlsi=2TDG0JQmbm4bW3O6
@TheBlueGarage5 ай бұрын
Thanks for the tip, I had this setup for over a year before trading this truck. Never had a single issue with it.
@Hiltrljr5 ай бұрын
When I installed the brackets, the measurement between them is 31”. A traveller 30” is too short, I’ve got a lastfit on the way…hopefully it works
@TheBlueGarage5 ай бұрын
Interesting, I never got the exact measurement. But I am assuming that the 30” light bar from LASFIT accounts for the length of the light itself, not accounting for the 1/2 inch on either side. I could be wrong, but that’s the exact setup that I used here.
@michaelmancini57735 ай бұрын
I jumped the Silverado HD family after owning three in succession , went over to the Tundra family, because GM’s prices have become obscene, hope they go under
@TheBlueGarage5 ай бұрын
Pretty sure all companies have lost their mind on pricing, using COVID as an excuse.
@gerardonino1995 ай бұрын
Any issues hitting the UCA bump stop? If I go too fast on some bumps, mine will hit metal on metal
@TheBlueGarage5 ай бұрын
I have not. What size wheel and offset are you running?
@darrenwright48285 ай бұрын
Shorthand to the point is better ‼️👍
@JGLuxe5 ай бұрын
"This discount has reached its usage limit" :(!
@TheBlueGarage5 ай бұрын
Thanks for the heads up! Let me know if this works for ya, and if you need any other links. lddy.no/1j98q
@hdeazy5 ай бұрын
How lifted is your truck???
@TheBlueGarage5 ай бұрын
Stock 2” Trail Boss lift + ReadyLift SST 2” front & 1” rear
@reyleeq40365 ай бұрын
What offsets are the wheels? Looks like they poke out a little, but not too much. Looks good.
@TheBlueGarage5 ай бұрын
Thank you! They are a -12 offset
@Rip8895 ай бұрын
so sloppy and amateur
@TheBlueGarage5 ай бұрын
Thanks for your useless comment 👌🏻
@eddiemacagnone49755 ай бұрын
Looks great, thanks for sharing! To fit 35’s did you have to lift more than the standard TrailBoss leveling kit for the 35’s to fit? I’m interested in 35’s too on my TB but not sure if I’ll need an additional lift??
@TheBlueGarage5 ай бұрын
Thank you! I added the ReadyLift SST 2” in the front and 1” in the rear.
@krakadile6 ай бұрын
I cant wait to get the bottom cover with the five switches to connect auxiliary lights. Definitely a must have.
@TheBlueGarage5 ай бұрын
Thanks man, I have a video for that install as well.
@krakadile6 ай бұрын
Awesome job.The only thing I don't agree with is the way you put together those wires, but other than that, you make the best videos on you tube. Thank you for that.
@TheBlueGarage5 ай бұрын
I appreciate the supports, thanks man!
@kevinraabe38556 ай бұрын
What was the offset for your wheels
@TheBlueGarage6 ай бұрын
-12mm
@timweatherford13846 ай бұрын
Great video, would you be able to do a video of how to change out the interior dome lights on the truck? They are dim as well and would like to see how to remove them without breaking trim
@TheBlueGarage6 ай бұрын
Thank you! I might be able to down the road. Hoping to get back into making more content soon.
@johnnypina79006 ай бұрын
What’s the backspacing on those wheels? Any ideas if a 0 offset will still have poke? I want some poke but nothing crazy TIA
@TheBlueGarage6 ай бұрын
This setup is with a -12mm offset. I’m not sure if 0 will or not. I went with a little offset, didn’t want it to be too crazy.
@americacanwin6 ай бұрын
can’t find link for wheels and tires?
@TheBlueGarage6 ай бұрын
I just tried looking them up on their site, I don’t think they carry the Fuel Block 43’s anymore. 17x9 -12mm. But the tires are Nitto Ridge Grappler 35x12.50R17LT.