Bryant Sapp

Пікірлер

@ari1234. 7 күн бұрын

Bolt size

@mariotoledo3297 Ай бұрын

Dude I have the exact same color . Cannot find the color code anywhere in the car. Can you share it with me?

@xj_overlander 28 күн бұрын

PU7, sienna pearl. Should be on the door jam info. If you have a 00-01, it’s likely sienna pearl. If it’s any other year, it’s not PU7

@calebdickson8614 Ай бұрын

Bro drink some water, your voice is like sandpaper to my eardrums

@xj_overlander Ай бұрын

Glad to hear it

@lukefrei3202 3 ай бұрын

I tried getting hold of you on instagram about getting a shift boot bezel printed but never got an answer back. Any luck with being able to get one? Thanks

@smitty3644 3 ай бұрын

Hey man I’m not sure if you’re still active on here but I was curious if you’re still 3d printing the Jeep XJ manual shift bezels or if you’d be willing to sell the stl file so I could print one for my XJ

@MileytheJeepV2 4 ай бұрын

So i got all the parts needed from a guy selling them as a kit… i have the ecu and the harness for it but im confused on how to run said harness… i figured temporarily ill run my auto ecu with the manual till i figure that out

@david65711 4 ай бұрын

Thanks for the insight bud

@Limited_Driver 5 ай бұрын

I tried looking you up on Instagram, but I can't find you. how much do you 3d print your bezels for?

@desertadventures4221 5 ай бұрын

Nice video

@xj_overlander 5 ай бұрын

Thanks!

@gabrieltorres6569 5 ай бұрын

I did the turbos 4 times on different n54 cars and it always took me over 20 hours. Cant never keep up with the maintanaince

@xj_overlander 5 ай бұрын

Gotvha I see, I certainly don’t expect them to be easy to work on. But crossing my fingers that the maintenance is manageable

@MrTwitch37 5 ай бұрын

You said you were currently at 5 degrees on your pinion angle, is there a maximum tolerable degree or is it all up to if you get vibrations?

@xj_overlander 5 ай бұрын

I’ve found you can get away with about 8° on the pinion, assuming you have a SYE. But it’s probably more of a case by case situation. Ideally for a SYE, 2° for leaf setups or 0° for coil setups is where ya want to be.

@DrewH-zv9iz 5 ай бұрын

Enjoy the next 10k you drop on maintenance and upgrades. From a fellow 135i owner. You’ll never sell it!

@xj_overlander 5 ай бұрын

Oh I’m sure! I think it’ll be fun

@user-ph7jx2np2c 6 ай бұрын

Fix your picture quality. its at 360p

@xj_overlander 6 ай бұрын

It recorded at 4k. When you post a video to KZfaq, any video, it’ll post at lowest quality then raise over the first hour to full quality. Only way to resolve this is by posting and scheduling it, which isn’t necessary

@abrahambarkhordar5572 6 ай бұрын

Thanks man I have so many questions

@xj_overlander 6 ай бұрын

What questions do you got?

@WAEMIDIV 6 ай бұрын

I like how you saved this one until Mickey entered the public domain so Disney couldn't sue you for $75,000,000

@xj_overlander 6 ай бұрын

Yeah you got me figured out

@mazen101s8 6 ай бұрын

Does having these bad bushings make the jeep vibrate ate 60 miles?

@xj_overlander 6 ай бұрын

Well if you feel a steering wheel shimmy, maybe. But if you’re talking about the entire jeep vibrating, it’s more likely your driveshaft. Check the quality of your u joints, and also check your pinion angle, especially if you’re lifted and don’t have a SYE

@mazen101s8 6 ай бұрын

@@xj_overlander thanks will do

@Jeep89MudFun 6 ай бұрын

Whats your Instagram. Great video very helpful. I would like to see the arms if you have pics or a video

@chankludo1 7 ай бұрын

I bought a bell housing for my AX-15, from deadjeeps on ebay and the bell housing arrived with a 3-inch long crack. Almost $300 cost, for junk. Luckily, I can weld aluminum. No shame. Beware.

@xj_overlander 6 ай бұрын

Yep I hear that. I haven’t been happy

@christianmarchan6577 7 ай бұрын

I did this to my Jeep XJ in CA, 110 degrees summer no problems, best mod you can do to an XJ. The Jeep slower though

@xj_overlander 7 ай бұрын

Oh absolutely. It’s remarkably better in cooling. But I absolutely noticed the loss in power to the ground

@Outdoors-ty8hp 7 ай бұрын

Thanks for all the info. My jeep has 1 ton steering and has tie rod roll. It’s wandering all over the road. I did the phone measurement and caster said 6. Any ideas?

@xj_overlander 7 ай бұрын

Hmm gotcha. How much lift do you have?

@WAEMIDIV 8 ай бұрын

Fascinating

@pisstoffcat5136 9 ай бұрын

You can tighten the spring on the front of your stock clutch, needle nose pliers,takes about 10 seconds I did mine and i noticed about the same results as this . If im moving it stays around 190ish and if i idle for a few in summer it gets 210ish . I live in high desert with low humidity,

@xj_overlander 9 ай бұрын

Oh interesting

@JeanPernicia 10 ай бұрын

Thanks for your insight. The Fan clutch in my Comanche actually works as the one you reviewed here. You can floor the pedal to the metal and the fan does rev instantly. The idle temperature cannot be controlled by the main fan at all. This metal fan only covers half of the radiator area. That's why is so important to ensure that the electric fan works properly. Since my jeep has a Jeep ZJ PCM, an temperature switch was installed on the lower coolant hose to activate the electric fan relay.

@mcgama88 11 ай бұрын

Thank you for the great info. I have two Jeeps. An XJ *94, WJ 2004. Taking a look at converting to manual on the 94 so now have a view as to parts. M

@xj_overlander 8 ай бұрын

For sure! It’s not terrible to do. Finding the parts are the hardest, swap isn’t bad. Best of luck

@reedcarpenter2994 11 ай бұрын

So how do you like out so far? As a daily?

@xj_overlander 8 ай бұрын

It’s kinda hit or miss with me. It’s a great jeep. But it’s also just got so much overlap with my XJ that I’d rather drive the jeep that drives nicer, has more power, and is more capable. That said, it’s unbeatable for a summer rig! I am looking to sell it though, have too much projects. It just crossed over 120k miles too.

@kjohns236 11 ай бұрын

Nice build! you have done a ton to it for sure! I would like to know more about the engine computer monitor....

@xj_overlander 8 ай бұрын

Thanks! And it’s an “ultragauge”

@WAEMIDIV 11 ай бұрын

what a mess seems odd they wouldn't still make such a simple thing

@rlt7409 Жыл бұрын

Your boy WAEMID put me on to you gonna follow. You got a Jeeper in NYC if you're ever around I got the tour.

@bio300td Жыл бұрын

Very cool! I am in the middle of a AX15 swap into my 1998 XJ. Your 3D printed shift bezels, how can I put in an order?

@xj_overlander Жыл бұрын

Awesome! Feel free to reach out to me at my instagram @xj_overlander or my shop email, [email protected]

@user-xf7gk7mt9k Жыл бұрын

where did you buy the fan clutch?

@xj_overlander Жыл бұрын

I got mine from Napa

@dommangano3152 Жыл бұрын

I did this for the hot summers in az. But my issue I ran into was the mechanical fan blade hit the shroud

@xj_overlander Жыл бұрын

Only reason I can imagine why that would happen is if your motor mounts were worn out, used the wrong clutch, or maybe a loose fan shroud? Not saying it’s not possible, but I’ve ran one for over 6 months without an issue. And can speak for others too

@rachelfrew7916 Жыл бұрын

How can I purchase a manual shift bezel for my ‘97 from you? I’m not on Instagram or Facebook. I really appreciate your help!!

@xj_overlander Жыл бұрын

Hey there! I spent a little bit of time addressing this so I can better track shipping stuff for those than don’t have the social media Please email me at [email protected]!

@BLACKWOLF-1911 Жыл бұрын

After 18yrs of owning my 95 rio grande edition I had to trade it. N.Y. winter's ate it alive. I had those leaf springs and you didn't ride in it, you rode on it. Like a pogo stick. I am trying to find one to replace it but I refuse to pay these prices. I just want a plain jane stripped wrangler with a 5sp and a heater. I would buy this one in a heartbeat. Beautiful! 9:54 10:22

@xj_overlander Жыл бұрын

Thank you! They’re cool jeeps

@littlebastardsracing49 Жыл бұрын

Just take the leaf spring pack apart leave what u need J's

@xj_overlander Жыл бұрын

So the interesting thing about this is that I tried that after this video and I pulled leafs until it was remotely spring like. I’ve done this on my XJ too. Issue was that it would axle wrap like no one’s business, even with the 8.8 anti wrap perches. Putting leafs back in until it stopped with the bad axle wrap essentially put it back in a super stiff place. So not worthwhile in my case. At this point, I’m fine just throwing better leafs at it

@rachelfrew7916 Жыл бұрын

Hi can you please post your video of modifying Jeep TJ clutch pedals to work in 97+ XJ? Thank you so much!❤

@xj_overlander Жыл бұрын

So this issue with this is that I never took a video of this. It requires me buying new pedals. So its not really in the plans at the moment unless I come across some for cheap. It’s pretty simple though. I just cut the pedals at the bends and then slowly trimmed down the three pieces until they matched the profile of the XJ brake pedal. Then welded together. Swap the XJ brake pedal bracket in with the TJ clutch bracket and you’re set!

@rachelfrew7916 Жыл бұрын

Thank you! Wish me luck haha😅

@mywildholm Жыл бұрын

Hey there! Good job.. We bought an island on a lake in the wilderness of Canada last summer! We have so much to learn about machinery maintenance and fixes! 😊

@xj_overlander Жыл бұрын

Hey thank you! Sounds like a big project, but a lot of fun!

@inthemoment01 Жыл бұрын

i actually like the seats if you dont mind me asking what year of PT Cruiser

@xj_overlander Жыл бұрын

Right on! My brother said he believes it was a 2004 turbo edition. He noted that the turbo edition had different seats. Also noted that you just unbolt the PT cruiser seat rails and bolt on the YJ rails to the seat and it’s set. Rides a little tall though. My thighs are right up against the wheels and I’m not that big of a guy. I’d recommend shortening the seat by a couple inches if possible.

@MichaelThomas-ln6mr Жыл бұрын

Nice I have 5” lift with 35” mud tires on mine ARB front bumper

@xj_overlander Жыл бұрын

Super cool!

@WAEMIDIV Жыл бұрын

WOOOOOOOOO

@WAEMIDIV Жыл бұрын

Incredible

@clevelandcarpenter8535 Жыл бұрын

Looks like it is great shape. The frames on these are usually rusted out in Cleveland.

@xj_overlander Жыл бұрын

Yep, it’s not bad at all. Some rusty bolts but nothing else on it. I’ve heard that Midwest Jeeps can be a lot of fun when it comes to rust

@hidinfrombiden1734 Жыл бұрын

Rear shocks are upside down, the boots go up😅.

@xj_overlander Жыл бұрын

Pull up a photo of the blistein 5100’s for a XJ. You’ll see the bar pin is pressed into the exact same bushing. Which means it can only go in the exact orientation as mine.

@hidinfrombiden1734 Жыл бұрын

@@xj_overlander damn that's crazy must just be an XJ thing because I have them mounted on everything we have & the boots are always up. I'm only here because I'm in the market for an XJ and trying to do some homework before pulling the trigger😅. Appreciate the info🤙.

@immacook4u Жыл бұрын

Nice XJ. Did you have much rust when purchased?

@xj_overlander Жыл бұрын

I actually never saw any. It looks to me like this is the only rust and seems to have started from the inside. Likely a few years of wet feet and not drying out. Otherwise it’s in pretty solid shape

@missyL1973 Жыл бұрын

I just had a new driveshaft put in and my car is making horrible noises. Scraping sound and sounds like a motor bike or air brakes sound when I’m slowing down without brakes. It also makes noise when I turn. Maybe they got the angles wrong. I’m so upset. I only had a slight vibration so decided to change it but now I’m regretting.

@mrkultra1655 Жыл бұрын

👍🏻

@mrkultra1655 Жыл бұрын

That is sweet, thanks man

@xj_overlander Жыл бұрын

Any time!

@jesterphun6299 Жыл бұрын

Hi I was wondering if you were still making the 12 degree tool for the NV3500?

@xj_overlander Жыл бұрын

Yup, I still am

@moejr14 Жыл бұрын

Did you notice any loss in power? My 4.slow can’t afford too much loss with 35 inch tires haha

@xj_overlander Жыл бұрын

I did notice some. Jeep sounds like a dump truck but it was a little noticeable. But you'll be hard pressed to find a better fan setup. I've been in the sand driving really hard and never went over 200⁰ I think it's worth the experiment. I opt to swap the ZJ fan clutch in during hot summer months and put the XJ one back in for any other time. It's a good tradeoff

@kdigiacomo Жыл бұрын

I live in Beaverton Or, what dunes do you go to? I haven't been to Sand Lake in forever but we go to Florence instead. Definitely farther away but way better.

@xj_overlander Жыл бұрын

I go to sand lake all the time but Florence is absolutely the best

@xj_overlander Жыл бұрын

Heads up, we have a XJ group on Facebook called XJ's Pacific Northwest, you're welcome to join if you want! All of us are in Oregon and Washington, largely.

@kdigiacomo Жыл бұрын

@@xj_overlander I'm on it but in my legal name. This isn't a fake name I use on here, it's my dad's Italian last name that I use on KZfaq.

@kdigiacomo Жыл бұрын

Maybe it's just the camera angle but the inside right rear u-bolt looks like it's not straight. Maybe take a peek unless for some reason I'm completely wrong or it's suppose to be like that. Just a heads up is all.

@xj_overlander Жыл бұрын

Probably the angle, it looks solid in person. Thanks though!

Ең жақсы KZfaq

Пікірлер