Where did you buy the key from?

You is a great mechanic right enough. Just bought an i40, they said it had been just serviced....but i will check to see if they were bullshitting. Thanks for an informative vid on this car...cheers

Bullshit placement of Diesel filter 😅

The spanner light can mean a lot of things it’s not a service light the inspection sign on odometer is the service light

Part 2 ?

Bonjour deux questions... Pourquoi vous remettez le boulon a l'envers alors que vous avez baissé le berceau.... Et la deuxième... Pourquoi démonté la rotule de direction et le moyeu ? Vidéo bien faite ...mais bon je comprends quasiment rien a l'anglais... Merci encore...

Didn't work for a 2021 trailblazer

Try doing that anti roll bar bushes 😂😂😂 there ever more fun

Renault espace are worse they even put a rubber plug above the back bolt though i could push it up no chance half hole out 😢

Just bought a d8s didnt work on my 2021 trailblazer

Hey, is this a 1.5dci? Have to change mine too but wanna make sure there’s no need to support the engine when removing the mount. Also where did you get the mount from, I’m looking on auto doc but you never know if the part is suitable even when they say it is, thank you, appreciate it in advance 💪🏼

Great video Will be doing this next week. With regards to that extra washer in the filter pack, could it have been a sump plug washer?? Thanks again

i was looking to get D9S but it have 6500mAh battery with bigger screen & that mean the battery will not last long without charging! while the D8W 10000mAh with small screen & i was disappointed! thats was really weird for me! but still D8 is a beast. Xtool nailed it with their tools awesome features & subscription & prices! i bought D8W & it's in the way. 40

Nono pop drive shaft

Great video. I bought a D8 unit today.

Very nice

Great video, ill be doing mine next week!

thanks

Hi. Can you leave the link or part number of the rear caliper for Renault fluence here? Did you purchase from a motor factor or online?

You have the correct remote You need to go in remote adaptation and programme with your xtool

good job

Amazon $199 and free Prime delivery.

Hello, how would you do a module reset on the airbag systems?

Ur a goat

Very interesting thanks

Thanks for the video is very helpful. I also wanted to ask you my car got the dpf removed and the mechanic told me that was ok to pass the NCT . But when i got there the car didn't pass due to the emissions i can also see grey smoke coming out of the exhaust. I wonder if the oil change and an additive will help to reduce the emissions or maybe is something else?

Nice disclaimer :)) . I recently changed all engine+gerabox mounts . I made the mistake of not supporting the engine when i changed the upper 'hidraulic' mount . The engine did sag and twist a bit . No big issue , but without an M10 threaded rod i could not pull the engine back in its place . -I could , but i would have to lift it up again , put on stands again , remove engine cover and mount a small hidraulic jack on the bottom of the engine somwhere . Problem is...:) :D , i already did this for the gearbox mount , and i was hoping to simply change the upper mounts one by one... That was a mistake ... So if anyone reads this , save yourself 2 hours and keep the car and engine jacked all the way . The lower mount and the upper rear left can be changed without jacking the engine . Another important bit is the necessity of some small crowbars , can be as simple as a pipe - for the lower mount , as you don't have enough space for good leverage , you will understand when you get under the car...:D . In retrospect a Crowfoot wrench would have been really useful for the upper 'hidraulic' mount -as you don't have enough space from the coolant expansion tank. All in all straightforward procedure .

You really did a great work. Thank you very muchg for sharing. I need to change the anti roll bar bushings, do you think that I have to lower the subframe to have enough access? Many thanks.

At last, a detailed, well-filmed video on how to change those bloody control arms! I'm going to try it next week and change my inner and outer tie rods too. How long did it take? Did you also change the sway bar bushings while the frame was lowered?

Hi. Thabks for the video. I have the artidiag 600s and the menu is very different. There is no 'brake reset', any idea what it would be under on mine pease?

Did you get the security code with the D8? If so, how did you do it?

Can you please measure the length for me if possible

I just bought this for £128. It's 19Kgs Halford's 2-tonne Aluminium Low Profile Jack vs the 27Kgs 3-tonne metal version from RocwooD or all-over-the-place alternatives with the same heavy weight. I like it as it's a no-brainer mid-range jack in weight, price, & lifting capacity. Was looking for reviews of this jack and could only find this video - well done quick fix mechanics.

great job

Decent video, thanks

some cars have 250 to choose from

it will read all the way back to 96

I got a lightning deal on Amazon and play $219

Any ideas if this goes high enough for a ford ranger

may be has you an instruction to chage common rail pressure sensor for i40 ? I have sporadic error like immediately stop of motor during driving or sometimes ver low power for short time and stop, but restart without problem after one minute, and without errors on log ... only one time error P1186 recorded at moving ...

Can you update this Topdon 600 S through your phone ?

I have tried but after some seconds the light it’s turned on again, is there any other way to turn off?

Sorry if I missed it but what oil type, grade etc did you use?

Pentru schimbare cabluri nu demontați nici băncile, nici mocheta deoarece cablul circulă prin niște țevi de ghidaj. Nu este nevoie nici să desfaceți șuruburile de la tunelul central, deoarece partea din spate a cotierei se scoate prin declipsare, forțând-o cu o șurubelniță dreaptă.

can anyone tell me what the chrome bars at the side of the jack are for?

Tengo el d9 y es una herramienta espectacular.Muy buen video, saludos

Poderia.ter.seguret.guetoei.Alto.Alte.para.o.Grupo.Stelanis. PSA.Fiat.Brazil❤

Apatelho.limitado.em.informasao.XTools.D8

I have the exact same problem. How did you get the carpet out? I've tried but the seat clips won't come out. I have removed the rear seats but the black clips holding the seats together are stuck so the carpet won't come out..

Hello, great video and I'm now very confident changing this part. However when I've looked up starters, it suggests a 1.4kw and a 1.2kw. I have a J10 1.5 diesel. I would hazard a guess the higher the kW, the more efficient? But does it matter which?