Yonatan24

Пікірлер

@c4love Күн бұрын

Definitly gave me a new perspective on metal cutting. Excellent thoughts ideas and advice!

@Yonatan24 21 сағат бұрын

@@c4love Thanks!

@josephjonzen9394 2 күн бұрын

Great video! Thank you! Incredibly thorough and well documented. I would like to ask: How do you smooth the edges after you cut? I'm just starting to explore cutting stainless steel .4mm with shears. I haven't started yet. I want to make the letter "L" about 8 inches tall but I want it to look nice!

@Yonatan24 2 күн бұрын

@@josephjonzen9394 A file would work well for that

@Skiman__ 3 күн бұрын

What rpm do you recommend for use on the rotary tools for each of the cutting disks shown? It’s like I’m always too slow, or too fast. I don’t get a cut and the disk just jumps around.

@Yonatan24 2 күн бұрын

@@Skiman__ The safe and correct answer is the manufacturer recommended speed. Personally, I always go at full speed.

@Skiman__ 2 күн бұрын

@@Yonatan24 haha I would definitely agree, but this is some knockoff tool I’m borrowing from someone. There no “recommended” anything lol

@tylerl4472 7 күн бұрын

0:19 so many questions about the plexiglass… I thought if you cut fast then the plexiglass will be more prone to chipping and cracking? What blade is this? I thought the more teeth the better but I seem to have trouble finding small blades with lots of teeth. Can you cut plexiglass vertically like you did with the wood? I kind of have a project that needs me to do that right now…

@Yonatan24 7 күн бұрын

@@tylerl4472 I suppose if you push through the cut too quickly, it's more likely to crack, likely with thinner material. It's a Diablo blade, I linked it in the description. It's fantastic, great for plywood as well, except for the fact I warped mine a bit so I can't use it with a straight edge. Do you mean to do a plunge cut? What are you trying to do?

@goku445 10 күн бұрын

Cool but not loud enough :)

@Yonatan24 9 күн бұрын

@@goku445 it's loud but ideally I would have liked it to be a bit louder, I would have added another one

@mariojuan7539 12 күн бұрын

great video! super useful info. i'm gonna buy an ice pick now even though i am not an engineer

@Yonatan24 12 күн бұрын

@@mariojuan7539 Excellent!

@TheSaviourOfHumanity 12 күн бұрын

Good video mate. Keep it up. You’ve swung me to get one, you should try leave a link to a site with a referral affiliate system and you might get credit for sending users to buy.

@Yonatan24 12 күн бұрын

👊🏻 Excellent! I posted affiliate links to Amazon and eBay, but these are relatively cheap, not much to profit off of. More fun making them!

@Joevim 12 күн бұрын

this vid is way too good for the amount of views

@Yonatan24 12 күн бұрын

I just posted it :)

@Yonatan24 12 күн бұрын

After 6 years. I even heard my phone storage breathe a sigh of relief. Comment YOUR best tips! Affiliate links to Amazon / eBay ►► Eclipse engineer's scriber amzn.to/3WgX2JJ / ebay.us/mgEZzX Worx mini circular saw amzn.to/3zQMhWZ / ebay.us/VofGJZ Flex shaft rotary tool amzn.to/3WvUmsT / ebay.us/oo9UKU Carbide burr amzn.to/4cSjIam / ebay.us/kKihFs Torch amzn.to/4ffPv6r / ebay.us/NNGGqL Extra long drill bits amzn.to/4bU8gte / ebay.us/r1ysR5 Angle grinder amzn.to/3LvCN6b / ebay.us/y7Fmvz Small magnet amzn.to/46bBAKL / ebay.us/7oP5mj Long Allen key amzn.to/3xWhc3D / ebay.us/P5oi5M Brass stock amzn.to/4d98sGi / ebay.us/ATA4bF Washing machine suspension spring amzn.to/4daBXaq / ebay.us/G8kO6e Worx mini circular saw review► kzfaq.info/get/bejne/rZhgh8ty2t-3caM.html Where to find magnets for projects► kzfaq.info/get/bejne/htaTa8VhrpjIiac.html Best ways to remove c-clips► kzfaq.info/get/bejne/otVlidlmlqnMh3U.html Build the bike rack shown in this video► kzfaq.info/get/bejne/mN13rc5k1rvVpXk.html 🔴 Subscribe for new videos!► kzfaq.info 0:00 INTRO 0:13 Workshop tips & tricks 1-50 6:41 Tips for the home bike-shop 7:16 Making your own custom engineer's scriber secrets

@bdm3052 13 күн бұрын

I put a pocket clip on my surge and it opens in my pocket. It’s annoying, any tips?

@Yonatan24 12 күн бұрын

@@bdm3052 Time for the sand dip.

@bdm3052 10 күн бұрын

@@Yonatan24 what does that mean?

@Yonatan24 9 күн бұрын

@@bdm3052 It was a joke, does the hinge the clip is in open? What exactly opens?

@bdm3052 9 күн бұрын

@@Yonatan24 oh lol. Ok so I have a pocket clip from leatherman, when it’s in my pocket on my right side it will open. So the handle that doesn’t have the clip on it opens up in my pocket

@Yonatan24 9 күн бұрын

@@bdm3052 Do you think tightening the screw a bit could solve the problem?

@thehangmansaxe 15 күн бұрын

Why not use WD40?

@Yonatan24 15 күн бұрын

@@thehangmansaxe It's not actually a lubricant and doesn't help long term. Great for removing rust though.

@Love_u_Bangladesh 16 күн бұрын

Very healpful. You earned my subscribe :)

@Yonatan24 16 күн бұрын

@@Love_u_Bangladesh Thank you!

@Love_u_Bangladesh 16 күн бұрын

Today my 1 finger heavily injured (cut to half) by angle grinder.

@Yonatan24 16 күн бұрын

@@Love_u_Bangladesh Woah! How did it happen?

@Love_u_Bangladesh 16 күн бұрын

@@Yonatan24 i tried to make a square head bolt from hex bolt. I have not vise or grip pliers or work bench so i use my bare hand to hold that bolt (one hand to angle grinder another hand to bolt), and my angle grinder was little guilty. I lost original nut (which hold cutting disc) so i made another nut by normol nut and 2 washer . When i was cutting that nut its disc it throw out that hex both and cut my sahada finger (not full but almost).

@Yonatan24 16 күн бұрын

@@Love_u_Bangladesh Bummer. Stay safe!

@saoner1 17 күн бұрын

Can you use a drill as a dremel tool Can it be used to spin blades or abrasive discs to make cuts

@Yonatan24 17 күн бұрын

@@saoner1 It will work, but it will take more time due to the lower RPM. It's recommended to avoid doing that long term to avoid damaging the bearings, but it will certainly work.

@Fettimayne1804 20 күн бұрын

Maan this helped me a lot Headphone jack stuck in my laptop

@GD-qt2pn 20 күн бұрын

Thank you.

@McClays_ 20 күн бұрын

I could have use this tip for work last night. 😅 genius!

@patriotmonkeyq2232 21 күн бұрын

Thank you!

@paulgregory2507 26 күн бұрын

As a Leatherman Wave user, I appreciate this video very much. Thanks.

@Yonatan24 25 күн бұрын

@@paulgregory2507 Excellent!

@caocao45590 26 күн бұрын

Great video!! Thanks for the tips!!

@Yonatan24 26 күн бұрын

@@caocao45590 Glad you liked it!

@jorobinson98 27 күн бұрын

I enjoy watching your creative ways with tools and metal, very informative, humorous, and encouraging. Please keep making more videos 😊

@Yonatan24 27 күн бұрын

@@jorobinson98 Thanks!

@adrianoadriano4730 Ай бұрын

👍👍👍🙏

@danjoroddor5538 Ай бұрын

Every time I remove a c-clip, POOF! It's gone forever. (or until the vacuum cleaner finds it.)

@bladeboysfv5646 Ай бұрын

When you use the more fragile discs double up player and then try it it works a lot better and cuts faster just thicker

@Yonatan24 Ай бұрын

@@bladeboysfv5646 interesting

@Jerry-xs1uz Ай бұрын

I also have a group of Magnets (Mainly strong black barium ferrite) that I call my Bewitched Family. I have given them names!!! Thank you 🙏

@DiegoJerez-ml6ed Ай бұрын

Y anda a buscar el anillo a la c°nch@ de su hermana

@_454_ Ай бұрын

A purchased angle grinder will ALWAYS be safer than ANY tool you improvise. DON'T use any contraptions built with other tools that are meant for another job. Most accidents come from these.

@KipdoesStuff Ай бұрын

lol, you take big chances on KZfaq.

@Yonatan24 Ай бұрын

'Tis life! How about you, when will you be making more videos?

@Yonatan24 Ай бұрын

Here before this gets demonetized. Affiliate links to everything I used: Jigsaw amzn.to/3xp9TkL / ebay.us/sXjyvO Foredom flex shaft rotary tool amzn.to/3XEBwkv / ebay.us/sXjyvO Flap sander amzn.to/4bndtJX / ebay.us/CS9pbx Small drum sander or diamond burr amzn.to/3zjAksv / ebay.us/jH17BI Bosch Flexiclick drill amzn.to/4eFUkWA / ebay.us/II7ekV Drill bit set amzn.to/4cGgExz / ebay.us/MhPZCL 25mm (1") hole saw amzn.to/3L2i7Cy / ebay.us/OrOJPd Assortment of files amzn.to/45GYlpy / ebay.us/dqssMc Bar clamp amzn.to/4ciWeux / ebay.us/rPT40r Mouse sander amzn.to/4cAaleB / ebay.us/J7OHFB 🔴Subscribe for new videos!► kzfaq.info Read the instructable ► www.instructables.com/Impossible-Round-in-the-Chamber-Wood-Pistol-Puzzle/

@SophieGamesIceHockey Ай бұрын

Such a useful video and so well made and filmed. I hereby award you the Oscar for best hacksaw video.

@Yonatan24 Ай бұрын

Thanks!

@lethalrealm7370 Ай бұрын

I have a Steelseries arctis nova 1 and it's left handle just broke idek WHT happened w it. I tried using tape 😅 to fix it doesn't work

@jatontherun Ай бұрын

Brilliant!! Trying this today on four table legs I modified from an old Singer table.

@rs-5830 Ай бұрын

whats the utility to do it magnetic?

@Yonatan24 Ай бұрын

What do you mean?

@badrabbit9703 Ай бұрын

Great video. Thanks for the ideas. You were right the chisel did surprise me.

@prabhuja7554 Ай бұрын

I need to make a cut out for my Raspberry Pi metal case ...how is it possible ...can u help out ..I need to sand after cutting too ...

@Yonatan24 Ай бұрын

Is it steel or aluminum?

@prabhuja7554 Ай бұрын

@@Yonatan24 Metal : Alumium Sir... Its a regular Raspberry Pi Metal case, i want to modify in budget for diy...thickness exactly the thickness when 2 Metal measuring scales placed together like a sandwich...

@Yonatan24 Ай бұрын

@@prabhuja7554 that's a hard one, maybe maybe an angle grinder.

@ReadyUpGo 2 ай бұрын

You are putting your mind to good use. This is how I was taught to work as a boy in the 50’s. First with the head, then the hands. We considered purchasing a tool as a last resort. Thank you for contributing to the philosophy of recycling and finding ways to do tasks without buying MORE! Awesome job!

@Yonatan24 Ай бұрын

Thanks

@alonadi5383 2 ай бұрын

סרטון מעולה!!

@Yonatan24 2 ай бұрын

תודה!

@kevinclause4p55p5 2 ай бұрын

This single video is more useful than all 13 years of public school.

@Yonatan24 2 ай бұрын

Hey woah...

@BuckScrotumn 2 ай бұрын

I have these little bastards on my crossbow, and the problem is that I have to put them back on so I have to remove them without damaging them. The added salt in the wound is that it shoots off in a random direction and is as big as a crumb.

@Yonatan24 Ай бұрын

I've heard of people using blue tack so it doesn't fly off. Consider purchasing spare ones as well. Good luck!

@Vik1919 2 ай бұрын

These are like real life Easter eggs! I wonder what else is hidden in plain sight in our homes and all around us?

@lanceareadbhar 2 ай бұрын

Thanks for sharing. I was putting up a ceiling light that had a simple way to do it with one person, but the lines they made went in the opposite direction for what I needed and considered cutting the lines myself before asking some to help hold it which made it a lot more frustrating getting the holes set up properly.

@gerald8573 2 ай бұрын

May I suggest using WD40 to remove crust and rust and afterwards using Ballistol to lubricate? It’s a fine and food safe oil that is made for fine moving parts like premium rifles.

@Yonatan24 2 ай бұрын

I'm not fimiliate with it, sounds like a great idea

@coolghoul9 2 ай бұрын

Put a die on before bolt cutting it

@Yonatan24 2 ай бұрын

Great idea!

@KernowEDC 2 ай бұрын

You can get carbide blades for jigsaws that’ll cut steel too. Using it on some steel piping at the moment. Cut around the diameter of a pipe though, not straight through 👍

@Yonatan24 2 ай бұрын

Does it cut that well though?