Thank you for the explanation! You have saved my life from the bad mechanic.

Why do you need to clamp the hose? Why not let it run out?

How do you know if it’s full? Should it be full to top of radiator cap?

Doesnt work with the new coffee press design cant fit into zip no matter what :(-

Would you say this protects the windshield from rock chips from other cars going by. I was going to get a windshield protector for trailering but I’d just get one of these if it protects from rock chips. I like the look of it . Thanks for the information!

Hello, Are you interested in testing our products? We would like to invite you to test the Seat Covers for your Can Am Defender Max

Thank you ! Swapped my belts today with the help of your video😊

Thank you!

Tires or tracks ?

This video was more helpful then this videos that be taking 15min

Thanks, lot of help.

I wish you would have shown how to get to the FILL PLUG!

You made videos of all the cleaning, no reason and skipped over the most crucial part! 99% of the reason people clicked on this video. How do you actually remove the clutch!!!!

This video wasn't helpful at all. Nothing was explained properly and it's a fucking treasure map to figure out where he is on the vehicle

just wondering what the attachment is on back of garmin? specific cradle or what

why do you clamp hose for thanks

Yeah would love to see how you wired up the power cable

Thanks bro!

Great job on the video!!! Informative and straightforward!!

My machine (23 limited) is making the exact same noise. Dealer replaced the front differential under warranty but new one still making the same noise. They said there is currently no fix from BRP such as a shim kit like there is with the 20-22 models. To be determined what the dealer decides to do next.

Excellent video, just what I needed, thank you!

This video showed me a lot😂

Thanks for the diagram

Great video, installing one of these on friends defender today, wasn't aware of the door harness tho, should be fun, lol. Where did you get that kit so cheap at on ebay? Have looked but no luck...

Consider a fuse

nice video. Is it as handy as you had hoped?

To which direction loosen the screw on the primary and the secondary variator? Asuming it will be the same on the 400 model?

Thx for the video. I was wondering if they had some thermostat built in or not. I am troubleshooting my heated seats that don’t seem to work now and the voltages at the switches don’t make sense.

That was loud before adding the fluid change. Seemed to make a decent difference though. What do you think of the can am half doors on this machine vs the full soft doors your old machine had?

Cover is a poor fit if you have fender flares. I had to cut top corner seams at the rear corners to allow my rear lights to protrude and get cover to fit at front. So I have no confidence cover will stay on if you install per instructions. I pulled bottom strap forward and pulled it under the front shocks then clipped it it closed.

Ticks me off that they didn't go with a proper full rocker switch. Like, the whole rectangle. I've ordered custom switches for mine! Great video!

I’m curious about the doors. Now that it’s been awhile, how do you feel about the soft doors you had previous vs these half doors? I just bought a 2023 defender and can’t make up my mind on doors. I’m going to be plowing with it, and I know I’ll need something. After watching your videos, it seems that trailering cover will be necessary as I trailer a lot. But I have read cab lights that I don’t think will fit. Curious how your making out and feeling between the two.

Hello, Are you interested in testing products? We would like to invite you to test the rear windshield for your 2022 Canam Defender HD10 Max XT

"hey so I hooked it up" is as far as the instructions go

hope you show how you remove the door latch

How’s the poly holding up? I’m going to buy the flip up but not sure if I should get the poly or glass. Seems like everyone says the poly scratches and to just get glass. I can’t decide.

Purchasing a new unit today and there’s no info we could find that shows compatibility with the soft doors. So glad this video was found!

Is this light brp light or aftermarket?

Everything looks good, except for you didn’t show how to wire the roof cable, Or where it attaches to.

what is your idling rpm at?

I’ve been thinking about adding the the rear nets that are on the back of the front seats so the rear passengers have a little storage. How are yours holding up? Do they seem durable? Thanks

I’ve thought about getting these for my Defender Max. Do they seem like they are good quality and will hold up over time? Are yours still holding up ok?

What grade of gas do you use in it, 87 regular unleaded or premium gas. Thanks. I’m looking to get one like yours. Great video.

Is there a torque spec for those 14mm and 17mm bolts?

Hello, Are you interested in testing products? We would like to invite you to test the rear windshield for your 2022 Canam Defender HD10 Max XT

Nice 👍

Is there any problen if we put water instead if coolant

My aunt and uncle had a cabin in Woodstock sub and had access to both cranberry and arnold lakes enjoyed both

Thanks for the video, I'm looking to do this on my Defender. I don't suppose you took any video installing the Roof Power Cable did you? lol - I need all the visual help I can get, I'm new to all this. :)

1:55 I’m having trouble putting that bottom back long screw back in. It won’t align properly so it won’t go all the way in.