2 жыл бұрын
5 жыл бұрын
6 жыл бұрын
7 жыл бұрын
Пікірлер
@randycaldwell8995 5 күн бұрын
How has this cold air intake breather work out for you? I know you put your cold air breather on a year ago. I just put my cold air breather on, not happy at all with this cold air breather. I'll will put my stock air breather back on soon. Some reason since adding this cold air breather, I have lost vaccum in the engine, real bad gas milage, and my transmission shifts down a lot quicker on a hill. Thank you a lot for showing me how to put brackets on my grand cherokee for the cold air breather. If you could, let me know how you like the cold air breather? Thanks Randy!
@wyattgorman3224 4 ай бұрын
What muffler you have on it
@Niemelan1106 7 ай бұрын
❤
@focus1ism 8 ай бұрын
I switched to rubber joints cause I got a lot of road noise. I'm on the freeway a lot so it works for now. Having issues with vibration and think it's my caster angle on the rear axle. Watching your video to hopefully gain some clarity.
@nohandlexyz Жыл бұрын
Hey Nate. You inspired me to replace my crossmember. Took me longer than I thought. I reversed the trans mount bolt as well. There was barely any room to work that bolt in.
@natewj1077 Жыл бұрын
Awesome! I too had a difficult time by myself, mostly battling rust, but I'm glad I could help
@maccook5230 Жыл бұрын
Just so you know, that wire loom is removable and it’s for the blue power that’s why it’s in there it to put it on your power wire. The ground isn’t supposed to be more than 3ft.
@JOHNYY05 Жыл бұрын
Thanks
@devenreal Жыл бұрын
Also that lifter tick is not typical 4.7 stuff that is a warning sign before something happens further down the valve train you will want to get that replaced ASAP and all 8 especially if one is already failed. kzfaq.info/get/bejne/gJZ3ZqZynK3DdmQ.html
@natewj1077 Жыл бұрын
Thanks for the location as to where the mount goes! All seems well with it so far. As for the lifters, I know the tick isn't good, it's a super common failure on 4.7s. These are actually replacement lifters, and they've ticked ever since we installed them. Yes they were prepped properly before installation. It goes away after a few minutes, then not a sound. Thanks for watching!
@devenreal Жыл бұрын
That extra bracket that you thought is for the evap Is a middle support bracket it goes right above the alternator and you will need to remove the bolt that is existing it holds the intake stable so it does not rub on the heat shield
@sandstoneridge6041 Жыл бұрын
What do you do with your brake lines when you install this?
@natewj1077 Жыл бұрын
Mines not lifted so I didn't need to extend the hydraulic brake lines. But the parking brake lines went on the bottom, and I put some foam tape on to keep them from rubbing through
@soundrecordings2659 Жыл бұрын
looks like your valve seats are failing? *smoke, particularly at startup and right off idle* 0:33
@natewj1077 Жыл бұрын
Yeah, it's the valve seals. The early 4.7's are known for it. I just gotta keep checking the oil.
@carlosclemente3925 Жыл бұрын
Hello friend, what a good machine, what did you place so that it has that sound?
@natewj1077 Жыл бұрын
@carlosclemente3925 it has no cat, and a 3 inch black widow "race venom" muffler
@michaelmaier1923 Жыл бұрын
Not dial torque is beam type but sure you know that
@mrno3525 Жыл бұрын
How ur gas mileage? I just put bk mine on my 01 jeep grand Cherokee wj 4.0. Had some trouble shifting for almost 7yrs lol. Until solve it last Friday, the return spring near the valve body seem loose n stretch, so play around wit it spray some wd40 on it n I went on the rd n it shift like a new transmission lol. Before it shifted at 2000rpm but when needle to downshift the engine revv a lil. The amount of time I try to adjust the tv cable,when it only the return spring wanted to adjust.
@natewj1077 Жыл бұрын
Gas mileage is fair, I have other mods, and get on it quite often but I'd say I average about 16MPG on my daily drive.
@damibabygod4761 Жыл бұрын
Currently purchased an 04 limited WJ and looking into this as a replacement for spending an arm and a leg for k&Ns intake at $350....was it worth it to save a few dollars and get this intake?
@natewj1077 Жыл бұрын
It's pretty decent, I really haven't had a problem with it, besides it's metal instead of plastic. No instructions, but it's decent, came with hardware, and other components. I'd probably get a more decent filter, and make sure of the pcv valve. other than that pretty good!
@damibabygod4761 Жыл бұрын
@@natewj1077 thank you for the insight. Also did you end up upgrading the air filter?
@natewj1077 Жыл бұрын
@@damibabygod4761 yes, currently running an AFE filter I had lying around...
@Jalapenogoesintight Жыл бұрын
I got a 110 tao tao and I stripped the sparkplug threads so I swapped it with a similar head. Now I couldn't get anymore than sixty lbs of compression. I adjusted the timing enough times I bent a couple bolts that hold the cam gear on. Wtf either I grabbed a shitty head or possibly wrong head possible valves need adjusting idk but I think I'm gonna either find the right helicoil or just up grade to 125 and buy the head for that cylinder. I geared it down to a 12 tooth front sprocket and it had been running ok to the point I wouldn't hold the throttle open too long cause anything over twenty mph it's unsure of itself given my size .. I used to use it mainly to rip around town. I live in sunny NW WI where it's perfectly legal and we are ATV friendly here. I wanna fix it cause it's good for what it is.
@neoblackwolf69 Жыл бұрын
I have never seen snow in my life and I'm 43 ,I have soo many questions.
@MRIDDLE72 Жыл бұрын
Word. Where you from?
@Hasithism Жыл бұрын
Damn so it's bolt on and no drilling required?
@natewj1077 Жыл бұрын
Pretty much!
@rener5399 2 жыл бұрын
Damn I want one
@silverrain99205 2 жыл бұрын
I need more WJ content. I have a 4.0 WJ and I’m trying to decide on what to do with it as far as a build goes
@natewj1077 2 жыл бұрын
Yeah, I'm actually planning on starting to post more... however, I'll recommend you a channel you might like. Try "Najar Offroad" on KZfaq. He's actually very informative!
@silverrain99205 2 жыл бұрын
@@natewj1077 okay. Will do.
@justindierolf8134 2 жыл бұрын
Cool
@revolutionday1 3 жыл бұрын
Been wanting to upgrade mine since I smashed it on a curb in a grocery store parking lot, so this video is definitely persuading me to do so! LuLz
@Hasithism Жыл бұрын
How big was that curb? 😂
@revolutionday1 Жыл бұрын
@@Hasithism Heh. Standard height, maybe 5" in. or whatever, but I was trying to go up an embankment that it was bordering, so the angle is what did me in. 😖
@jtothefx 3 жыл бұрын
Put a manual pit bike engine in them. Thank me later
@highlightzilla9581 Жыл бұрын
I did 💪💯🔥
@Garageless 3 жыл бұрын
wisconsin? im in dells just got tao tao for 5$ needs some work lol
@jack_wright_1685 3 жыл бұрын
i have some kawi dirt bikes but have a chineese 250 quad and the thing rips
@pikefronteblu3038 3 жыл бұрын
Hi how much those cost? Can i buy one of those with a budget of 250€???
@tacticalidiot175 3 жыл бұрын
You'll need at least $5,000 for a quad my friend
@BattTube 2 жыл бұрын
@@tacticalidiot175 not one of these chinese fun toys
@n1tr145 4 жыл бұрын
What is the green one called, I don’t know the name of mine and mine looks kinda like the green one
@natewj1077 4 жыл бұрын
Kazuma
@sebastianramirez3998 4 жыл бұрын
Uhh... you forgot the nutrious scene with Tyrese Gibson.
@pricemoore2022 4 жыл бұрын
Nate WJ I love this video
@dream101cats6 4 жыл бұрын
Nice 14k views
@dream101cats6 4 жыл бұрын
I subbed. I have a coolster it's the one with the bigger tires it's fun to pop wheelies with it.
@vertex4481 3 жыл бұрын
how long have you been riding for?
@dream101cats6 3 жыл бұрын
For about a year now
@keatengabriel8216 3 жыл бұрын
How do u pop a wheelie. I have a 2018 taotao 150cc bull and for some reason it takes a awhile for it to start moving. I've tried to pop a wheelie on it but I cant figure out why?.
@dream101cats6 3 жыл бұрын
I use a little hill it's all you need you just gotta get going stand on the back and pull up as soon as your going up the tiny hill. @shOOter_Star
@joeymcquilkin3670 3 жыл бұрын
“pop a wheelie” 😂 there’s your first problem right there - be in a low gear, pull up/back hard while simultaneously giving the bike power. You can get your power from ‘blipping’ the throttle aggressively OR dump the clutch and give the throttle some love… once you get up there it’s all about balance, nobody can teach you that you’ve got to find that part on your own. *start with one or both feet out to the sides for balance if necessary, it may help in the beginning. It’s going to take 100’s of times and you saying f*ck I can’t do this I give up but eventually one day you’ll find it
@YUNGBRUHRARI 4 жыл бұрын
how fast can you go with this?
@natewj1077 4 жыл бұрын
Mine was the camo one, and I believe when we tested it, it went about 40 mph
@clayoosting6925 5 жыл бұрын
The guy with the green quad has a pretty awesome channel you should check it out
@natewj1077 5 жыл бұрын
Yeah? You should check the description bud...
@Syoval 5 жыл бұрын
post another video
@natewj1077 5 жыл бұрын
I'm grounded...