Пікірлер
@RT-md6nx 5 күн бұрын
Chulada compa muchas gracias me ahorre 465 dlls en la agencia
@330catfish 10 күн бұрын
Did you disconnect the battery or anything like that?
@jaredlemay2118 10 күн бұрын
Thank you!!! 🙏
@nelsonfamilyoutdoors2214 12 күн бұрын
Do I need to put it in service mode to do just the front pads?
@dominantgigabitE1 16 күн бұрын
For the rear brakes, I was under the impression you had to put the car on brake maintenance mode so when you push back the pistons it allows it without forcing it ?
@deonjackson4005 18 күн бұрын
I don't no what tool was used to retract the rest of the piston in what is tool used on the rachet to get it all the way in can someone let me know
@jamesdore7147 21 күн бұрын
Just wanted to drop in and thank you for the video, I was able to use the zip-tie trick first shot today. I never would have known otherwise, Bravo!
@solarlight67 25 күн бұрын
Thank you! The demo and installation process were easy to follow, and the work was very clean. Great job with the video. Best, James
@vanceplace1349 Ай бұрын
When my light starts flashing I release the brake and push the button one more time then the flashing light just turns off. I’ve tried this a hundred times and it refuses to stay in service mode.
@TrailBossTatum Ай бұрын
Mane don’t mess up the Rolex 💯💪🏾💪🏾💯😉
@TrailBossTatum Ай бұрын
Thank you for your knowledge sharing 🙏🏾🙏🏾
@vaughanhopkins3642 Ай бұрын
Why the hell did they even put this on trucks .... if your driving a truck you shoukd have enough sense as to how to check your own brakes . Making systems for retards now ...
@marywilson4445 Ай бұрын
Absolutely a great video on these belt replacements. Thanks for taking the time to produce it.
@alvarezz09 Ай бұрын
anyone know the part number for the plug that he broke at 3:36
@user-zs9wh9xr6x Ай бұрын
Bro installed a bad ass hitch and receiver but didn’t replace tail light bulb 🤦🏽♂️
@J.A.P.S Ай бұрын
@@user-zs9wh9xr6x obviously you didn’t watch the end of the video brother 😂 you can clearly see when I’m testing the lights at the end they all work….6:30
@user-zs9wh9xr6x Ай бұрын
@@J.A.P.S jp nice hitch broski
@cischkefam 2 ай бұрын
How do you fix the “Service parking brake” Warning light on this truck ? Electronic Parking brake isn’t working. I’m changing the rotors and pads this weekend …maybe I’ll see something after I tear it apart …
@J.A.P.S 2 ай бұрын
🛑🚨 IF YOU ALREADY REMOVED YOUR CALIPER & HAVE NOT PUT IT IN BRAKE SERVICE MODE READ THIS!!!! Ok I did something similar to this before I could figure out how to put it in brake services mode i made the same mistake and tried doing this after I had already disassembled the rear brakes. I almost blew out the piston luckily I had someone watching and i stop before it could blow, but they did over extend. After all that I got all the lights come on probably because I had just over extended my piston (border line blew it out) I then tuck of the electric parking brake motor and winded the piston back , cleared all codes and they never came back. Know everyone reading this YOU CANNOT PUT IT IN BRAKE SERVICE MODE IF YOU ALREADY TUCK EVERYTHING APART…..TO LATE KNOW YOU HAVE TO DO IT MANUALLY OR YOU WILL BLOW THE PISTON that’s why I said in my other video if you already started taking everything apart you can’t do this anymore you will have to do it manually removing the electric parking brake motor and wind it back in by hand.
@Anvita444 2 ай бұрын
I replaced the rear rotors and pads last weekend. Found a set of pads that came with the pad wear sensor, but also found the sensor for $14 at autozone. I put the truck in brake service mode and also replaced the rear sensor along with the pads and rotors. When I was done I started the truck, took it out of brake service mode, and then the computer asked me if the pads were replaced....I selected "yes" and it reset the rear pads to %100 and left the front pads at %33. Also, I removed the electronic parking brake from the caliper and fully compressed the caliper piston with an oil filter wrench/clamp thing I had on hand....you could also just use a C-clamp. The tool is only really necessary if you dont removed the electronic parking brake.
@J.A.P.S 2 ай бұрын
Very helpful thanks brother 👍🏻
@Texas_G_Longhorns 2 ай бұрын
Great video man! Shout out to your pops, my dad would have said the same hahahaha
@J.A.P.S 2 ай бұрын
Glad you liked it!! Hahah
@IamPlank1920 2 ай бұрын
7:27 Love you man! Thank you
@J.A.P.S 2 ай бұрын
No worries happy to help 👍🏻
@Danny190 2 ай бұрын
I’m assuming transmisión was shifted into neutral to be able to turn the crank over?
@J.A.P.S 2 ай бұрын
I did not 😳😬
@abelrodriguez5616 2 ай бұрын
Good job
@J.A.P.S 2 ай бұрын
Thanks.
@astro4308 2 ай бұрын
Do you recommend doing this on a truck that is stating to rust?
@J.A.P.S 2 ай бұрын
Personally I wouldn’t just because the hitch needs something sold to bolt onto and if it’s rusty I believe there won’t be enough strength to put a load on it.
@mr.unknowncali-life9350 2 ай бұрын
How many miles did you did yours brother o 53k miles my bad haha
@J.A.P.S 2 ай бұрын
I believe something like that as well 50-60k
@nikkocavalier8479 2 ай бұрын
Thanks for videos
@J.A.P.S 2 ай бұрын
It's my pleasure
@professorFG 2 ай бұрын
Great video! Thanks for sharing! On another note, it's crazy that the dealer wanted to charge $171 to reset the brake pad life, insane.
@J.A.P.S 2 ай бұрын
Thank you 👍🏻 and yea that’s pretty Insane
@TxScum93 2 ай бұрын
Where did you get the receiver from?
@J.A.P.S 2 ай бұрын
Came original with the truck I just had it powder coated
@ItsJohnJohnJohnny 2 ай бұрын
Did you end up doing the Transmission fluid?
@J.A.P.S 2 ай бұрын
No I’m still waiting for the manufacture warranty to end so I can put my hands on it lol
@JuanCastro-rc9dl 2 ай бұрын
GRACIAS
@J.A.P.S 2 ай бұрын
De nada 👍🏻
@antoniozendejas4593 2 ай бұрын
What the torque spec on the pully
@J.A.P.S 2 ай бұрын
Not to tight but not to lose lol 😆
@ajvalencia5670 3 ай бұрын
I used your method and it work the first time. Used 3 tie wraps.
@J.A.P.S 2 ай бұрын
Excellent! Fantastic! Beautiful 👍🏻
@secuzz 3 ай бұрын
Thank you for the video. I spent $250 on gm parts, was quoted $300 to $450 for the labor at chevy dealer. Changed in about an hour after watching your video. Thank you once again.
@J.A.P.S 2 ай бұрын
Your welcome glad you did it yourself and had some fun wrenching 👍🏻 🔧
@chesleyrenater6158 3 ай бұрын
Thanks for the video 🙂
@J.A.P.S 2 ай бұрын
No problem 👍
@JamesAhTau 3 ай бұрын
Very informative thanks
@J.A.P.S 2 ай бұрын
Glad it was helpful!
@robertmeadows2432 3 ай бұрын
Thanks For The Zip Ties....
@J.A.P.S 2 ай бұрын
You bet
@davidporter7051 3 ай бұрын
nice video. I use Valvoline Maxlife but you did a great job.
@J.A.P.S 2 ай бұрын
Thank you! Cheers!
@Brandyn2893 3 ай бұрын
My 2020 makes the same sound. Glad I found this
@J.A.P.S 2 ай бұрын
Awesome happy to help man
@heavychevy8994 3 ай бұрын
At what mileage did you change the belt?
@J.A.P.S 2 ай бұрын
About 65K
@billkaufman7719 4 ай бұрын
Thanks!
@J.A.P.S 4 ай бұрын
No problem! Thanks for the super chat bro 😎
@VivPixStudio 4 ай бұрын
Helpful video my friend, thanks!
@J.A.P.S 4 ай бұрын
Glad it was helpful!
@danieldelarosa9863 4 ай бұрын
I wasnt able to put mine on service mode neither but still managed to change my brakes and rotors but now MAGICALLY its on service mode and cant get it back to normal so now my parking brake.doesnt work because its in service mode any ideas or suggestions? Will the blue driver work for that to take it off service mode or ?
@J.A.P.S 2 ай бұрын
I would imagine so if not I would just repeat all the steps to put it in Service mode again. Let us know wat you ended up doing pleas ?
@shannonturner8420 4 ай бұрын
Had to come back here and thank you for the cheat code!!My belt just broke and my zip ties worked so easy. Again, thanks bro💪🏾💯
@J.A.P.S 4 ай бұрын
That’s awesome bro he’ll yea 👍🏻
@ramon9199 4 ай бұрын
What size socket for back pads?
@J.A.P.S 2 ай бұрын
It’s in the video
@gregstock535 4 ай бұрын
Same thing on my 2019. My buddy said last fall that there was enough pads left til spring. That wasn't the case so I ordered Detroit axle rotors and pads
@hoodpremier 4 ай бұрын
Ok so the tool does work you just have to put the belt on turn it til it gets tight on the tool and then put your zip ties on the turn it slow took me 20 mins
@J.A.P.S 2 ай бұрын
Good information 👍🏻
@abdullahalbuainain7570 4 ай бұрын
Your throttle body needs to be cleaned
@J.A.P.S 2 ай бұрын
Good idea 👍🏻
@chrisjr1971 4 ай бұрын
The sticky side is to put the shim on from the old pads.
@J.A.P.S 2 ай бұрын
Useful information
@josesantaana1404 5 ай бұрын
What tires are those? Beautiful truck!
@J.A.P.S 2 ай бұрын
Thanks bro there Michelin tires the Defender series to be exact rim is a 22”
@user-pj4vt2qj9h 5 ай бұрын
I just did my brakes, PAIN in the A$$, had to take it to dealer that had their way with me in labor n scanning, also did the belts, PAIN in the A$$, but I did use zip ties, truck rides like a steel wheel wagon too, changed shocks, same rough ride, gonna sell or deal it off, GM sure went $hit,,,,, 😡😡
@J.A.P.S 2 ай бұрын
Wow better luck next time man
@00memelg00 5 ай бұрын
Great advice!!!! Thanks a lot
@J.A.P.S 2 ай бұрын
Glad it was helpful!