Replacing Serpentine Belt / AC Belt & Pulley On 2020 Chevy Silverado.!!

Рет қаралды 23,132

J.A.P.S

7 ай бұрын

In this video, I’ll be showing you how to replace the drive belt, idler pulley, and the AC belt. I use the special tool for the AC belt, but couldn’t get it to work for the serpentine belt so I end up doing a trick, using zip ties and turning the engine on for a second so it slips right on. This model truck doesn’t have a tensioner pulley so it is very difficult to put on the stretch belt, but this is how it worked for me and hopefully it works for you!
V-Ribbed Serpentine Belt - GM (12669858)
Air Conditioning Compressor Belt Kit With Tool - GM (12658178)
Drive Belt Idler Pulley - GM (12720530)
Metal Stretch Belt Remover Installer Tool Set - www.amazon.com/dp/B0C77G8DFF?...
TEKTON 1/2 Inch Drive Torque Wrench - a.co/d/cq3vpGV
TEKTON 1/4, 3/8, 1/2 Inch Drive Ratchet Set - a.co/d/hVzlVRC
Neiko 1/2"Drive Deep Impact Socket Set - a.co/d/ikuOoug

#chevrolet #helping #howto #serpentinebelt #trailboss #z71 #japs #trending #tips #truck #lifted #silverado1500 #wrenching #custom #service #maintenance #amazing #amazon #tekton #tools #handtools #information #informatonalvideo #craftsman #pulley #doityourself #dealership #milwaukee #arizona #phoenix

Пікірлер: 102

@marywilson4445 14 күн бұрын

Absolutely a great video on these belt replacements. Thanks for taking the time to produce it.

@secuzz Ай бұрын

Thank you for the video. I spent $250 on gm parts, was quoted $300 to $450 for the labor at chevy dealer. Changed in about an hour after watching your video. Thank you once again.

@J.A.P.S 25 күн бұрын

Your welcome glad you did it yourself and had some fun wrenching 👍🏻 🔧

@gregtackett4035 5 ай бұрын

Great video. Thank you so much for the zip tie idea. It worked better than I could have hoped for

@J.A.P.S 4 ай бұрын

that's great bro happy to help

@shannonturner8420 2 ай бұрын

Had to come back here and thank you for the cheat code!!My belt just broke and my zip ties worked so easy. Again, thanks bro💪🏾💯

@J.A.P.S 2 ай бұрын

That’s awesome bro he’ll yea 👍🏻

@martyvillarreal9144 4 ай бұрын

Nice video short and sweet. Thanks for sharing.

@J.A.P.S 25 күн бұрын

Thanks for watching!

@Brandyn2893 2 ай бұрын

My 2020 makes the same sound. Glad I found this

@J.A.P.S 25 күн бұрын

Awesome happy to help man

@TrailBossTatum 8 күн бұрын

Thank you for your knowledge sharing 🙏🏾🙏🏾

@robertmeadows2432 Ай бұрын

Thanks For The Zip Ties....

@J.A.P.S 25 күн бұрын

You bet

@VivPixStudio 2 ай бұрын

Helpful video my friend, thanks!

@J.A.P.S 2 ай бұрын

Glad it was helpful!

@TrailBossTatum 8 күн бұрын

Mane don’t mess up the Rolex 💯💪🏾💪🏾💯😉

@00memelg00 3 ай бұрын

Great advice!!!! Thanks a lot

@J.A.P.S 25 күн бұрын

Glad it was helpful!

@chesleyrenater6158 Ай бұрын

Thanks for the video 🙂

@J.A.P.S 25 күн бұрын

No problem 👍

@JamesAhTau Ай бұрын

Very informative thanks

@J.A.P.S 25 күн бұрын

Glad it was helpful!

@fletchnaaasty 3 ай бұрын

I just changed both belts and the Idler pulley on my 2019 AT4 6.2, she was screaming hard. I have no idea why it was so difficult for you to get the Serpentine belt on. I am by no means a mechanic other than KZfaq videos. First off there is no need for the extra tool don't waste your money just use zip ties instead. I used 4 zip ties to get the AC belt on and 5 zip ties to get the Serpentine. I used a long breaker bar with a 24mm socket to turn the crank shaft no problem from underneath (if you jack the truck up for those of us without a lift it's way easier). Took me longer to guide the belt and zip tie it down than to turn the belts on. I spent a good bit of time cleaning the belt residue off the Alternator pulley (don't forget to do that). If you run into zero issues this is a 30min job max. I called GM to see what they would charge. Their $485.00 job cost me $65.00. But thank you for starting me in the right direction with your video.

@Texas_G_Longhorns 28 күн бұрын

How many miles did your truck have before you replaced the belts? I have the same truck and I’m at 96K and my belts are quiet

@J.A.P.S 25 күн бұрын

That’s awesome man happy to help and good advice 👍🏻

@abelrodriguez5616 Ай бұрын

Good job

@J.A.P.S 25 күн бұрын

Thanks.

@paolomastropasqua3258 5 ай бұрын

Desde Miami le mandamos saludos a la mamá del ingeniero 😂😂😂😂

@J.A.P.S 4 ай бұрын

haha saludos bro

@nikkocavalier8479 Ай бұрын

Thanks for videos

@J.A.P.S 25 күн бұрын

It's my pleasure

@ajvalencia5670 Ай бұрын

I used your method and it work the first time. Used 3 tie wraps.

@J.A.P.S 25 күн бұрын

Excellent! Fantastic! Beautiful 👍🏻

@J.A.P.S 7 ай бұрын

No problem man happy to help 👍🏻

@marvintamayo1533 6 ай бұрын

Hey man I install the belt and pulley by turning the bottom wheel with ratchet where zip ties go, when I put everything back from air manifold I notice a puff sound coming out of it every time I turn off truck. Is that sound normal? Idk if I messed up timming by doing it by hand

@J.A.P.S 6 ай бұрын

@@marvintamayo1533 hey I also tried doing it by hand even went back and forth I don’t think that would mess anything up but don’t quote me. Let us know if you figure out wat it is and wat did you do to fix it thanks

@marvintamayo1533 6 ай бұрын

@J.A.P.S does yours make that sound when you turn off the truck? If you open hood you can hear it better

@Texas_G_Longhorns 28 күн бұрын

Great video man! Shout out to your pops, my dad would have said the same hahahaha

@J.A.P.S 25 күн бұрын

Glad you liked it!! Hahah

@2everydaylife499 4 ай бұрын

Just did both belts on mine a few days ago. Got them out of the way when i replaced my 170amp alternator with a 220 amp oem had to do high amp upgraded junction block with 250 amp fuse snow plow 200 amp fuse kit along with starter alternator cable for 220 amp load . Now if i have any audio or accessories they just go straight in the junction box with a oem fuse no aftermarket fuse holder needed

@J.A.P.S 4 ай бұрын

thanks for the info man

@billkaufman7719 2 ай бұрын

Thanks!

@J.A.P.S 2 ай бұрын

No problem! Thanks for the super chat bro 😎

@FTCHub-EpicVault 5 ай бұрын

Thanks for the video. I bought mine in 2020 and both the brake pads and the belt screaming. Embarrassing lol

@cristiangutierrez7388 4 ай бұрын

Mine did the same.

@J.A.P.S 4 ай бұрын

no problem man happy to help. lol yes definitely unbillable quality now a days.

@antoniohinojoza1233 5 ай бұрын

En that is the reason of all the new car trucks and suvs the mechanic are really competitive outhere 😂

@J.A.P.S 4 ай бұрын

lol

@rteight88 6 ай бұрын

Cool. Got an ideal ln wat to do now....thx

@J.A.P.S 6 ай бұрын

No problem 👍🏻

@JuanCastro-rc9dl Ай бұрын

GRACIAS

@J.A.P.S 25 күн бұрын

De nada 👍🏻

@chillvibes5714 7 ай бұрын

Thanks for the video 👍🏻 i also have a 2020 silverado its been making a single chirp sound when i start the truck i took it to the dealer and they said it was the belt they put a new one on and still continued to make the sound any idea what it could be?

@J.A.P.S 7 ай бұрын

Possibly a worn out pulley ?

@cristiangutierrez7388 4 ай бұрын

How much they charge you??

@chillvibes5714 4 ай бұрын

@@cristiangutierrez7388 they charged me around 250 for the belt and labor

@Sandshredder2 6 ай бұрын

Love your wheels and tires. Are those 20’s. Why size tires? I have a 2020 Trail Boss with the factory 18’s and am ready to upgrade.

@J.A.P.S 6 ай бұрын

Thanks man these are 22 inch Matt black snow flake rims with a Michelin Defender LTX M/S tire also had stock 18’s originally had these for about a year now nice upgrade and they don’t rub 👍🏻

@erickfuentes5975 4 ай бұрын

Thanks for the video, how many miles was in your truck before the belt started failing?

@J.A.P.S 25 күн бұрын

Your welcome it was 65K

@hoodpremier 3 ай бұрын

Ok so the tool does work you just have to put the belt on turn it til it gets tight on the tool and then put your zip ties on the turn it slow took me 20 mins

@J.A.P.S 25 күн бұрын

Good information 👍🏻

@Danny190 Ай бұрын

I’m assuming transmisión was shifted into neutral to be able to turn the crank over?

@J.A.P.S 25 күн бұрын

I did not 😳😬

@pedritoc.c.t.665 4 ай бұрын

I would try to muse the tool on the alternator the pulley is small not to much of diameter to turn

@J.A.P.S 25 күн бұрын

Yup

@melvinjohnson7033 5 ай бұрын

Excellent DYI video! How many miles did you have on the truck?

@J.A.P.S 4 ай бұрын

Thank you happy to help it has 63,000 :(

@januariotandoc3544 5 ай бұрын

No videos for transmission fluid change yet?

@J.A.P.S 4 ай бұрын

no sorry for the wait still on manufacture warranty can't touch it yet

@davispat1488 4 ай бұрын

I already changed my transmission fluid it did fix any problems I had. I can hear that I have a stock lifter as well. It’s gone away after putting seafoam in the motor but I have a serpentine belt I’ll be replacing this weekend and I believe an exhaust leak did I mention this truck only has 65,000 miles what the fuck Chevy

@bryansullivan9588 6 ай бұрын

Do you have DFM or is it disabled and how many miles are on the truck ?

@J.A.P.S 4 ай бұрын

DFM meaning ? 63,000 miles

@bryansullivan9588 4 ай бұрын

Dynamic Fuel Management Cylinder Deactivation

@kevingustafson4190 5 ай бұрын

Does your truck have the 6.2, or the 5.3?

@J.A.P.S 4 ай бұрын

5.3L :)

@tbucks1000 3 ай бұрын

What transmission does your truck have? 8 speed it 10 speed?

@J.A.P.S 25 күн бұрын

8 speed

@daveslape1 7 ай бұрын

You in Arizona? I could use some guidance on the zip tie thing.

@JuanAntonioOfficial 7 ай бұрын

Yes sir

@J.A.P.S 7 ай бұрын

Yes sir

@12avitia7 5 ай бұрын

Do the zipties just break off?

@koling-koling3938 5 ай бұрын

I feel like they would make some damage to the new belt, you can actually see that on 10:19 if I'm not mistaken. Sorry for replying without providing an answer to your question as I am thinking to change belt on my truck as well.

@user-hv8xf9qd8l 4 ай бұрын

How often should these belts and pulley be replaced

@J.A.P.S 4 ай бұрын

wouldn't be able to tell you an exact number of years but when it squeals it's time just listen.

@antoniozendejas4593 Ай бұрын

What the torque spec on the pully

@J.A.P.S 25 күн бұрын

Not to tight but not to lose lol 😆

@heavychevy8994 2 ай бұрын

At what mileage did you change the belt?

@J.A.P.S 25 күн бұрын

About 65K

@Mrniceguy959 4 ай бұрын

WHT size are those rims bro and tures

@J.A.P.S 25 күн бұрын

The rims are 22 and I have the Michelin defender tires

@CLCustom1911 4 ай бұрын

I'm about to do my belts on my 2020 silverado. This is my 5th GM vehicle and I can't believe they didn't put a belt tensioner in there. Clown activities 🤡

@J.A.P.S 25 күн бұрын

Exactly

@user-hv8xf9qd8l 4 ай бұрын

It has a 62

@J.A.P.S 4 ай бұрын

no it has a 5.3L

@user-pj4vt2qj9h 3 ай бұрын

I just did my brakes, PAIN in the A$$, had to take it to dealer that had their way with me in labor n scanning, also did the belts, PAIN in the A$$, but I did use zip ties, truck rides like a steel wheel wagon too, changed shocks, same rough ride, gonna sell or deal it off, GM sure went $hit,,,,, 😡😡

@J.A.P.S 25 күн бұрын

Wow better luck next time man