I think most have the windshield washer bottle mounted to the drivers side fender well.
@ChristopherL0rtiz7 күн бұрын
I’ve never seen one mounted to the radiator support. Pretty cool
@ChristopherL0rtiz7 күн бұрын
Thanks for doing these videos and being so thorough 👏👏
@ChristopherL0rtiz10 күн бұрын
These videos are gold. Thank you. Appreciate your thoroughness. 👍
@davidm27783 ай бұрын
Good info...
@davidm27783 ай бұрын
Awesome video.....
@logann9093 ай бұрын
i need One for A 63 iimala
@davidm27783 ай бұрын
Awesome video....
@jackwitterstaetter16683 ай бұрын
hope to see more videos they are really help full thanks ,and for gods sake take care of yourself
@MrKiddVidd4 ай бұрын
The head on mine broke off. This is super helpful. Thank you!
@salimsopari4 ай бұрын
thank you for making this video
@padresprojects4 ай бұрын
You're welcome.
@mic74636 ай бұрын
The giggles are AWESOME 😂😂
@mic74636 ай бұрын
Carl you have the KZfaq voice !!! So much FUN
@phildoleebowitz53357 ай бұрын
I’ve watched a few of your vids now, surprised they’re not viewed more. It’s helped me on my 64 so thanks
@padresprojects6 ай бұрын
Good to hear Phil. Thank you. I'll be doing more, just got side tracked for a few months by life.
@MrKiddVidd7 ай бұрын
Do you sell jigs? I definitely need one.
@padresprojects7 ай бұрын
I can make another set for you. I'd need $40 for the pair. They take a while to make.
@MrKiddVidd6 ай бұрын
Just tell me where to send the cash! Thank you!@@padresprojects
@520ViBE4 ай бұрын
I want a pair. Let me know how to get ahold of you. Left a comment with my email an looks like it got deleted.
@520ViBE27 күн бұрын
@@padresprojects anyway to get some jigs? I can even pay to barrow them and send them back lol
@HiptonismHD8 ай бұрын
A few hours ago I started digging into my 1964 Impala myself, and I started searching for parts. I need that "Splash guard" you called it at 8:45 and I can NOT find them anywhere. I found one website calling them a "Lower Inner Fender Filler Panel" but they're out of stock.
@padresprojects8 ай бұрын
Ya. I know the one. I've seen it listed online but it's a long time since I've seen it. I've got some but I think they're rather pitted or bent. I'll have to check and see what kind of shape they're in.
@HiptonismHD8 ай бұрын
@@padresprojects I got my passenger side off and it’s rusted to pieces 😬 Not sure the shape of the driver side I’m pretty confident it’s probably the same
@leadbullets4life9 ай бұрын
You have a blown head gasket between 3 and 4.
@padresprojects9 ай бұрын
Probably. That motors long gone now though. I picked up a running 261, transmission and dif for $400. Needed the trans just as bad since the one in my car was a coffee grinder, so this was a better option.
@leadbullets4life9 ай бұрын
400$ was a steal for a 261 and a transmission, a lot better running truck.
@chrisulloa71419 ай бұрын
can you do a video on installing the radiator support ?
@padresprojects9 ай бұрын
That content is covered over the course of a few videos. You could probably start here and then follow the series. kzfaq.info/get/bejne/erOYqJB_29qYm3U.html
@thomasquintana461910 ай бұрын
Where did you get the snap on jig for the bumper guards..
@padresprojects9 ай бұрын
I made those. I didn't do a video on that process though. It involved using a piece of body metal and heating/shaping it to conform to a damaged bumper section that already had the holes in the correct spot. That was my template. Each one took about an hour and a half to make.
@modembricker10 ай бұрын
Thanks for this, now I see that alot of people don't take their time to shim right.
@padresprojects10 ай бұрын
You're welcome Rich.
@bumber5511 ай бұрын
This video is excellent thank you
@padresprojects11 ай бұрын
You're welcome. More to come but I'm slowing it down for the summer. Really hot in the shop.
@jsweeney83811 ай бұрын
Should of bought a Tesla ;)
@padresprojects11 ай бұрын
Fire extinguishers not included. Good to see you can still read and write John. What amuses you lately?
@padresprojects Жыл бұрын
See the chapter called "Is the frame bent?" If you've got picks of that section of the frame on your 64 Impala, I'd like to see them.
@padresprojects Жыл бұрын
After getting the 64 Impala front end sheet metal in order its time for the front bumper. I did run into something unexpected, and I've also got something in store for next week. If you want to check out the fastener kit I mentioned on this part of the project you find it at www.jdoqocy.com/click-100845357-11554339?url=https%3A%2F%2Fwww.partsgeek.com%2Fcatalog%2F1964%2Fchevrolet%2Fimpala%2Fbody_mechanical_-ar-_trim%2Ffender_hardware_kit.html I may make a small commission from PartsGeek.com if you purchase something.
@padresprojects Жыл бұрын
Finally getting to the point where the front end on the 64 Impala is going back together. If you want to check out the fastener kit I used on this part of the project you find it at www.jdoqocy.com/click-100845357-11554339?url=https%3A%2F%2Fwww.partsgeek.com%2Fcatalog%2F1964%2Fchevrolet%2Fimpala%2Fbody_mechanical_-ar-_trim%2Ffender_hardware_kit.html I may make a small commission from PartsGeek.com if you purchase something.
@padresprojects Жыл бұрын
Maybe you've got other methods for protecting your trim while in storage. Go ahead and leave a comment below to share it with other viewers.
@padresprojects Жыл бұрын
PartsGeek has 3 different fastener kits to choose from. The variations are small, and the number of fasteners varies. I could get a small commission if you purchase parts from PartsGeek: sovrn.co/iw4pfeo
@billw9889 Жыл бұрын
Hi Padre - thanks for sharing - was the steering column- / dashboard-mounted tach on the ‘64 Impala w a 409 a factory option? Interesting comment about it that the ability to verify ‘numbers matching’ from GM wasn’t possible ‘til ‘65.
@padresprojects Жыл бұрын
Ya. If it's the one above the steering column in front of the instrument cluster, it was just an option.
@adyjames8204 Жыл бұрын
No console because not an ss. Pretty slick 64.
@padresprojects Жыл бұрын
Actually the entire SS package in 64 was just a trim option. An SS in 64 didn't include everything we've come to understand as an SS option like console, tac, V8, or posi diff. You could get a 6 cylinder with 3 on the tree with the SS trim.
@chrisgoudy1709 Жыл бұрын
Looks like quite the project. Good luck, will be fun to follow the progress on this.
@padresprojects Жыл бұрын
I think I like working on them more than driving them.
@robertnowak7184 Жыл бұрын
Get at er.. loving the progress and detailed videos
@padresprojects Жыл бұрын
Thanks Robert. Shooting these videos adds a lot more time to each task so I might not cover everything, but there are definitely some things that warrant detailed coverage. I think KZfaq is loaded with coverage on cutting and grinding, and welding but there are some unique disassembly and assembly procedures that require a bit of finesse to get thru. I'll try to focus on those.
@robertnowak7184 Жыл бұрын
Hell yeah, one of the few first subscribers and will see this project go from this to done... Just saying hello and loving it already. pleasure to meet you
@padresprojects Жыл бұрын
Thanks Robert, Making some progress lately. Slowly but surely.