Рет қаралды 1,159
I remove and re-install both fenders on my 64 Impala, mostly with the intention of updating all the fasteners. In the process I show you 2 ways of handling it.
00:00 Start
01:00 Remove the 64 Impala driver side fender bolts.
02:10 Remove the 64 Impala drivers side fender.
02:25 Inspect the fender skirt mount point.
03:04 inspecting the fender skirt.
03:50 Remove the 64 Impala inner fender.
05:03 64 Impala fender molding removal.
06:49 64 Impala fender molding clip removal and replacement.
07:25 Remove and replace 64 Impala fender molding clips.
08:26 Removing 64 Impala inner fender splash seal staples.
10:17 Replace the 64 Impala inner fender.
11:20 Review of the original fender skirt j-nut assembly.
11:48 Cleaning nuts and bolts on 64 Impala passenger side fender
12:50 The objective for next weekend.
13:10 We've got new 64 Impala front end fasteners.
14:22 A review of the 64 Impala fastener set from PartsGeek.
18:48 Installing j-nuts and fender bolts
21:38 Install the 64 Impala lower fender skirt j-nut.
23:36 The 64 Impala cowl side panel fender bolt
24:36 64 Impala cowl front fender mount point.
24:56 Re-install 64 Impala fender.
25:52 Bolting the 64 Impala fender to the filler panel.
27:03 In conclusion...