Where did you get the wood grips?

Would rifling the entire barrel slow the pellet down ? I’m assuming it doesn’t apply to BBs.

Nice BB gun. Looks great 😃

Looks awesome!

Love your imagination and skills, which I don’t possess, so I wonder if sending the plastic grips to the company and asking them to replicate might be a solution, or finding a skilled chippy in the U.K.

Hello, I cannot unscrew the brass "screw" Do you use a special tool for this ? Thanks

Check out the sig p 365 based on that thay could make ppk with 12g co2 and bbs in the magazine and with short handle.

Great Video !

Thumb rest is the speed loader cut out.

Mauuu tanyaa brp harganya

Telat satu detik

Good video… liked it .. make some more please… 👍

I would like a pair of those woodgribs for my revolver, that would be Nice.

Do you need a license to own this

Hi again! I am "using" this video that I had already watched and, as ever, enjoyed, to tell you two things: another KZfaqr, said that the M29s from Umarex are in fact replicas of the S&W model 27,and those are in. 357Magnum, and the reals .357s ammo fit in perfectly, if you load the replicas with them. If you try to load these replicas with a .44 ammo, they will not fit. The reason why Umarex sais that these are replicas of the M29s is because of marketing matters. Dirty Harry used the powerful .44 Magnum, not the .357... Makes sense. Now the other thing: I get a .357 cartridge, and it fits and locks perfectly on my ASG Dan Wesson 715 model replica, as if this revolver was the real steel version!!! 😮😮. And the more I watch your videos on yours M29s the more I see my ASG came from the same place... (The end: I never get enough of your work on this replica or others...). ❤❤

Failures always lead to new discoveries. Brilliant really.

I have been missing out on your channel nice work 👍🏼

Great videos and channel. Rune was right!

Absolutely brilliant . The n frame round butt grips I got from the company were also a bit lighter in color than the factory grips. I just lived with it but seeing how good they came out wishing I would have tried to stain them. Figured weight would be different but does it change the balance?

I was pretty sure the wood grip will be more heavier than the plastic grip ! (even with the hot glue) Happy to see than the silver and the brass cartridges are the same I will see tuesday when i will receive my 3" 4.5mm if there is or not an adjustable hop-up, i see no videos talking to that but in the descriptions there is an adjustable hop-up Thanks a lot ! And yes, the wood grip is the really final touch who was missing to this m29, now it is perfect 👍

Hi my friend. It looks super nice. Thanks for the shout-out🙏. Looking forward to your next videos and when you get the 8 inch version. Take care and have a great day. Greetings from Norway😃

Oops! Ancient film format again? :)

Great job, impressive I saw on the last video you put resin uv inside the original plastic grip Do you put it inside right and left side of the grip ? I will be curious to know the weight compared to the finished wood grip ?

Left a comment earlier now it’s gone. Anyway great job looks natural. Shows a lot of dedication and patience

The right grip -- ok, you screwed it to the metal handle, but how will you keep the left grip steadily?

❤❤❤Got no words, even though I have seen all other videos of this project. So beautiful and well done!!! So greatly finished!! ❤❤So good for my confidence, that is so down!!

Great job my friend 😃👍

Oh! HD format. How did you fit it on the youtube frame?

Looks realy G R E A T !

Superb job fella 👍🇬🇧

Hello again!! In fact it is to bad that we are to far apart. Each time I watch or ''rewatch'' these videos I feel it more. Anyway. the thickness of the metal of these cans, and its softness make this ideals to end problems of fitness as for exemple if a barrel does not fit a little forced to the frame on a revolver replica. Or on other parts in replica guns or other things as well. As I am in a country where parts are hard to find, and expensive sometimes, I have to get them from another sources and then modify them. Little bolts (for 1911 grips and alike)comes from old house interruptors, electric sockets, and damaged home circuit breakers, also bring some interesting components that you will use. Please check this and let me know when possible, if this is not too much asking. Those computer dust printers also have lots of parts for electric replicas ( but I do not like electric replicas, and unfortunately I do not know nothing of electronics so far) but they got lots of springs that despite of having strange shapes, may have lots of use on replicas. As well as theis small and tiny small bolts, nuts, metal or plastic frames supports, brackets, and so on, The dust ink cassets also have plastic gears, that may be used or replicas, but I do not know for sure, and they have an aluminium cilindrical tube, that can become a silencer or other part, funny springs, and a magnetic axle. Here there is a big problem: the super thin dust. And I can not get rid of this, how I wish I could find some help here. I got around 400 cassets for disassemlbing...

Hello, thank you very much for your work and effort. I found a page on the Internet who is called „Woodgripsandmore“ because I myself have also the idea of adjusting wooden Handgrips for my M29 Smith&Wesson Revolver. Unfortunately, the fishbone skin is missing from these wooden Grips, but you could pushing in the Fishbone Skin, and you could take the original emblems from the original Grips and insert them into the wooden handles. You only have to incorporate the fish skin and emblems, but as skilled in craftsmanship as you are, this should not be a problem for you. But your result still looks very good. Cheers and thank‘s again

Hi again!! I am sooo happy that you came up so fast with this video. It was so ggot to watch it. Meanwhile, I bought the ASG chromed 6inc Dan Wesson, and I am so damn afraid that it could break like the blued M29😮😢😢!! I emptied only one C02, so far... And I would prefer to change it grips to wood ones, like you are Bravery doing to yours M29s... Keep showing us your moves, please!! At least I get know-how, and courage!!

Nice job👍. Looking forward to see how it will be when you are finish with the work😃👍

That’s astonishing really. Looking very good and respect the dedication. Metal butt plates were a thing in the 70s and would like to get one for my 629. I say go with the butt plate. It’s rare for a YT channel to get a lot of subs quickly. Many channels are on for years before they get traction unless they do something viral.

Sir,how much the prize of this.

Hi, Can't you use rechargeable 8g or maybe 12g sparklet ? Maybe you will get more space ? Like this, the sparklet will not need to move A hole in the wood grip to reload the sparklet

Hmm. If you shorten the grip you might be able to use the 8 gram CO2 canisters. How about cutting the bottom of the plastic grips and glue the to wood grip? Not sure how good it will look 🤔. Good luck whatever you choose😃👍

Hello again. Every time I watch a video of yours, I love this channel more. All your thoughts shown here, are mine, as I will someday buy the same replicas and/or others, and I want to change their grips, of these very models, and others I do not own yet, but I have seen on videos here, and photos on the sites. Now: rechrome this material, well I do not know, my friend... Ask those that know non-ferrous "metals", like zamac. 😮 I know that now they chrome these sort of metals and even plastics, like these we see here. ( I am not teaching you anything, as I can not, and you know away much more). I love building and creating things. I love D.I.Y.,and modeling diverse toys and dioramas. And above all, I love replica guns. How I'd love to own the Japanese ones ❤❤. 1000 Thanks for this video!!

Heck of a job in front of you. Can’t wait to see it. I had a pair by that same company . I had a 629 classic that had a round butt , they had the classic grips that converted it to square. They were a good quality.

Good work bro. Whish you a good luck.

Where is part 1?

Yes, assessble the entire MM40 please.

Great upgrade 😃

That’s a pretty nice upgrade

Interesting. Looking forward to the shooting and testing 😃

Interesting airgun. Does russian AK47 Magpul stock fit for it or Norinco size wooden stock only?

Nice job buddy 👍

Excellent mods , quite ingenious 😊. A little wiggle in an AK mag is very common. A lot of times the shinny bolt is from chrome plating.

Looks great.