yes I do brother but I recommend upgrading the fans I have now (the link is also below) because the ones it came with does not pull enough air here in Texas lol OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share
@polarbear1034Күн бұрын
Thanks bro! In the process of getting everything together to do my first LS swap on my 95 1500, your videos are a huge help! I’m putting a 6.0 in mine potentially with a supercharger if I can sneak it past the wife lol
@SUPSGARAGEКүн бұрын
@polarbear1034 lol I hear you on that! been wanting to put one too! hit me up on instagram if you got any questions along the way 🙂👍 sups_garage
@knoslo20582 күн бұрын
Thanks for this great video walk through.
@Breathemusic42022 күн бұрын
"Also, it'll give you a reason to get the aftermarket one" ....BAHAAHAHA.....oh god am i ALWAYS looking for reasons and justifying excuses to get aftermarket parts! ESPECIALLY on my new 2024 M1000rr..... ;)
@TiicosWorld_3 күн бұрын
Great video man ! I’m changing the rectifier on my 06 600 … new battery and the bike starts ups and if I turn it off I won’t be able to turn it on
@SUPSGARAGE3 күн бұрын
thanks brother do you know if what's volts the battery is at while the bike is running? I always replace both stator and rectifier when I'm having charging issues did you not replace the stator too?
@TiicosWorld_3 күн бұрын
@@SUPSGARAGE I haven’t order the stator yet ! I already order the rectifier could order both due to $ issues but I’ll order the next one next week…. The battery I haven’t tested yet due to the problem started today ! Tomorrow a buddy of mine it’s going to come with a meter and we will find out ! ( LOVE THE CONTENT ❤️ keep up bro)
@slickdaddycc75064 күн бұрын
Did you need a tool to remove the oil filter?
@SUPSGARAGE4 күн бұрын
Yes you do
@ericwilber23075 күн бұрын
Thank you 🙏 this video was very helpful
@BATGSXR15 күн бұрын
Whats that gear and assembly called?
@SUPSGARAGE5 күн бұрын
which part exactly brother?
@BATGSXR15 күн бұрын
@@SUPSGARAGEat 5:23 inside the stator cover assembly
@SUPSGARAGE4 күн бұрын
@@BATGSXR1 are you just trying to get a part number for the gear?
@BATGSXR14 күн бұрын
@@SUPSGARAGE part number or even just what it's called "stator gear" is not quite showing me what im looking for
@SUPSGARAGE4 күн бұрын
Are you talking about the starter idle gear? here is the part number 12611-01H00
@shodawg75806 күн бұрын
Can you tell me which radiator did you use, and did you go through the firewall with your harness
@SUPSGARAGE6 күн бұрын
I left mine just underneath the hood on the driver side brother Here is the radiator but I had to upgrade the fans to the link below the radiator link due to the fans it came with were not strong enough for my swap brother OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share American Volt Dual 12-13 Inch Upgraded 180 Watt Motors 12 Volt Electric Radiator Cooling Fans Reversible Air Flow Highest Performance 5528 CFM a.co/d/07Bm2NH1
@shodawg75803 күн бұрын
Thanks for the help
@SUPSGARAGE3 күн бұрын
@shodawg7580 no problem brother
@hotrodjoe9506 күн бұрын
I just sneezed and there's more snot on the napkin and that thing has oil 🤣🤣🤣🤣
@stevewickos847 күн бұрын
Mine is now making that noise after I pulled the sensor off. Do you have to replace the throttle body to fix the problem.
@subarutime50897 күн бұрын
I have a nv 4500 in a 06 yukon with a 5.3 from a 2002 and i had to do all of this and more nothing is the same everything chages from 94 to 96 to 2000 to 04. Everything lights ,wipers,seats,door panels,dash ,foot pedals,back window,abs brakes , steering wheel, mirrors ,cpu ,gauges ,carpet wire harness ac condenser,heater core fuel pump ,gas gauge is backwards full is empty 😅
@manuelsalas43248 күн бұрын
Starts on a dime now
@SUPSGARAGE8 күн бұрын
@manuelsalas4324 yes sir!
@user-fy4eo1sj4g9 күн бұрын
Nice. My bike has had similar issues, especially during a cold start. 06 Gixxer and never done one. Will tackle that project. Always helpful.
@SUPSGARAGE9 күн бұрын
thanks for the support brother 😊👍!
@crypton7719 күн бұрын
No need to getting out the clutch
@user-fy4eo1sj4g10 күн бұрын
Look great. Attention to detail as always.
@sergiocisneros992911 күн бұрын
What is the part number for radiator
@SUPSGARAGE11 күн бұрын
Here you go brother this is the radiator I used OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share But I ending up having to upgrade the fans to these because the ones it came with were not strong enough American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share
@mr.no387113 күн бұрын
Were you getting that 14 volts when the bike was idle?
@SUPSGARAGE13 күн бұрын
yes brother
@Eli_Sellars13 күн бұрын
i’m thinking about LS swapping my 1990 c1500. i have a 2002 suburban as my donor and i was wondering about the PCM, i’ve heard everywhere else that you have to tune it but unless i missed it i don’t remember you mentioning that. is it not necessary? thanks in advance
@SUPSGARAGE13 күн бұрын
@Eli_Sellars you do have to delete the vats, egr, rear 02 sensors, set your rpms correctly, etc so yes it's best to buy computer already tuned or your gonna have to get yours tuned anyway
@Eli_Sellars13 күн бұрын
@@SUPSGARAGE where did you get yours?
@SUPSGARAGE13 күн бұрын
Mine was already tuned ready when I bought the engine and transmission but I did end up buying the software (hp tuners) to change things I wanted later
@SUPSGARAGE13 күн бұрын
you can buy them tuned ready from ebay but just make sure you buy the correct pcm for your engine
@Eli_Sellars13 күн бұрын
@@SUPSGARAGE do you think it would be worth the money to just buy HP tuners and do everything i need to do on my stock ecm? sorry for all the questions😂
@bfrick233813 күн бұрын
What do the 2 fuel lines on the bottom side of the tank connect to?? Mine are not connected to anything.
@SUPSGARAGE13 күн бұрын
@bfrick2338 they should just be drain hoses brother so they just go to the bottom of the bike
@luckee198013 күн бұрын
That was the best diy video, man! Thanks a lot! It was really helpful. No cutted/hided bolt etc….
@SUPSGARAGE13 күн бұрын
Thanks brother glad it helped you! 😊👍
@seamusblack587614 күн бұрын
11:45 should you not cover the tank with a towel
@SUPSGARAGE14 күн бұрын
@@seamusblack5876 it would be safer to brother
@pyesonephyo15 күн бұрын
How mant inches did it get lowered?
@SUPSGARAGE15 күн бұрын
@pyesonephyo 1inch in the front and 2.5 inches in the back overall from a side view it gave it a 2 inch drop look
@smanjot43215 күн бұрын
My baby ninja 300 having same sound from headers and I was worried, I hope the issue is same with pipes or else I'm fucked😂
@greggalindo671415 күн бұрын
Thanks for responding so quickly! I replaced the entire unit. That could be the problem.😅
@SUPSGARAGE15 күн бұрын
@@greggalindo6714 np brother 😊👍
@greggalindo671415 күн бұрын
My fuel gauge goes past the full line when full and goes to 1/4 tank when empty. Have you ever seen this issue before?
@SUPSGARAGE15 күн бұрын
@greggalindo6714 if you messed with the fuel pump it's possible you bent the floater brother
@Ride5Ride16 күн бұрын
I’ve just done mine, and there now seems to be a rattle on idle coming from that area of the chain, is the gear on the water pump supposed to be tightened up all the way or only to a certain torque to allow a bit of movement in the shaft?
@SUPSGARAGE15 күн бұрын
@Ride5Ride I wanna say it will have a slight play which if i remember correctly it's normal does the noise go away if you disengage or engage the clutch?
@Ride5Ride15 күн бұрын
@@SUPSGARAGE it’s not the normal clutch rattle but it does slightly quieten when clutch is engaged, I understand the chain is a bit slack too but is the water pump gear/shaft supposed to have slight side to side movement?
@SUPSGARAGE15 күн бұрын
@Ride5Ride I wanna say yes u didn't remove that bolt did u?
@Ride5Ride15 күн бұрын
@@SUPSGARAGE for the water pump gear ? Yes we did, don’t have the tools to remove the clutch unfortunately so had to remove the gear to allow the pump to drop out
@SUPSGARAGE15 күн бұрын
makes sense I have never done it that way but again I believe it is suppose to have little back and forth play
@JarebearPlays16 күн бұрын
Do I have to empty the gas out of the tank? Or can I not just leave it in there? And leave the tank upside down
@SUPSGARAGE16 күн бұрын
u would need to empty it first brother because it will leak out from the top as soon as you have it upside down
@lorenzoramirez789418 күн бұрын
What radiator you use?
@SUPSGARAGE18 күн бұрын
this one here brother but I had to upgrade the fans to the link below the radiator link OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share American Volt Dual 12-13 Inch Upgraded 180 Watt Motors 12 Volt Electric Radiator Cooling Fans Reversible Air Flow Highest Performance 5528 CFM a.co/d/07Bm2NH1
@lorenzoramirez789418 күн бұрын
@@SUPSGARAGE thank you 👍🏽👍🏽👍🏽
@joec973919 күн бұрын
Thank you so much. Clear straight to the point and very informative 🎉
@O.R.T.S20 күн бұрын
This is VERY helpful as i've an idea to dismantling my speedo to put some silicone sealant on the top to help it be a little morr waterproof as it's annoying that there's condensation and it seems my led has dimmed out too and waa thinking if i could do that? Would really love to be able to change it to white or something! I think some leds have failed inside the screen
@user-ig1qn4qj8x20 күн бұрын
Just to be clear..the oil GUSHES out
@tonymartinez679820 күн бұрын
Do you not need sae 5w-30? Mine says that’s what oil mine takes
@Shift1dwn5up23 күн бұрын
Good video but torque specs for everything would have been helpful.
@smokey524524 күн бұрын
Do these headers work for a 2012 5.3l ls using them on a 1997 obs k1500?
@logyngillam686824 күн бұрын
So im replacing mine today did you drain the oil?
@SUPSGARAGE24 күн бұрын
No I didn't have to brother it will just be a little bit that should come out if your bike is leveled
@oneoffour6329 күн бұрын
What a great DYI Procharger install video! I have a F1A-94 on my 5th GEN Camaro!
@SUPSGARAGE29 күн бұрын
Thanks for the support brother!
@oneoffour6329 күн бұрын
@@SUPSGARAGE You're welcome. How much horse power you're getting out of it??
@SUPSGARAGE29 күн бұрын
I had got it dyno like 4 months after it was installed n made 606hp brother how about yours?
@oneoffour6329 күн бұрын
@@SUPSGARAGE Last time I had it dyno was at 1021 RWHP, i have a Don Hardy 454 LSX short block.
@SUPSGARAGE29 күн бұрын
Wow! ur build is more serious then mine 🤣🤣🤣
@dute007Ай бұрын
cmon man keep on posting some vids 😤😅 nice job btw
@SUPSGARAGEАй бұрын
lol I'm trying brother but it does take time working on showing how to do a valve adjustment on an R6 now coming soon lol but thanks for the support brother! 😊👍
@dute007Ай бұрын
@@SUPSGARAGE Have a good day man, and ride safe brother... 😁
@victork1504Ай бұрын
After replacement did you hear a slight whirring noise when pulling in the clutch and slowing down coasting? I put locktite on the bolts so I don’t know what else could be the issue
@SUPSGARAGEАй бұрын
no I didn't not brother if you have Instagram send me a video of what it's doing sups_garage
@TheFadingTheoryАй бұрын
Dude! Why edit the video after you have already done something? You need to show exactly what you did and what you had to go through. I'm gonna take off these fairings, remove these bolts here and there and then video edit the fairing are off? Show the ease, or struggle. Come on!
@srt_jr5618Ай бұрын
How do you drain the Freon
@SUPSGARAGEАй бұрын
As far as I know brother, you would need to go to a shop that has a AC machine to remove the freon
@trippycheerios9288Ай бұрын
Hey do you know where the oil sensor is ?
@SUPSGARAGEАй бұрын
I do not brother....
@jenellcam1553Ай бұрын
Saw you on the road that’s crazy my mom told me to look you up because she saw you driving with your YT on the back of the car
@SUPSGARAGEАй бұрын
You should have said hi! lol
@moeb5Ай бұрын
thank you
@Jays1leАй бұрын
You are the man. You showed so much stuff that no one else does. ❤
@zor0001Ай бұрын
Did you have to set piston 1 to TDC before putting in the new distributor?
@SUPSGARAGEАй бұрын
No I didn't brother
@OmarOmar-xy1xqАй бұрын
I got Yamaha R1 2002 I got my oil and radiator fluid mixed how can I fix it
@SUPSGARAGEАй бұрын
you would need to find out weather the mix is coming from the head or the bottom end first brother did the engine over heat?
@DeDoubleLАй бұрын
I’m 5’5 and tip toeing my bike how far do you think I should lower it from your experience?? I was thinking 2 inches in the rear & 1/2 to 1 inch in the front ….
@SUPSGARAGEАй бұрын
It sounds like you got it about right brother, you still probably won't be flat footing it but it will put you comfortable enough to ride it. it would be about half of your foot, if not a little more.
@DeDoubleLАй бұрын
@@SUPSGARAGE thanks
@HeyYou101Ай бұрын
Are the front bushing actually needed? Seems like you had a good amount of space without them.
@SUPSGARAGEАй бұрын
I would say it just depends on how low your going the owner of this bike just wanted to make sure it looks even from the bottom
@SaviBjkАй бұрын
Thx bro 🤘
@justinevans1953Ай бұрын
Do those clutch and brake lever comfortable to use? I'm planning to purchase one.
@SUPSGARAGEАй бұрын
I would say they feel better then the stock ones brother but there are better ones out there