2 ай бұрын
11 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@user-jm5mq5mi6x 2 күн бұрын
Great work🎉
@flyboywbl 7 күн бұрын
Looks amazing. Nice work!
@flyboywbl 7 күн бұрын
Don't you want to do the bottom first for the overlap?
@richardwylie07 7 күн бұрын
Normally I would, but the scallops are quite tricky. It worked better to fold the fabric over from the top to the bottom first, and then use the flat surface on the bottom of the scallops to lock in the covering.
@flyboywbl 5 күн бұрын
@@richardwylie07 ahhhh I gotcha. I folded mine over on the bottom. Secured it from the tip. Then folded the top wing one over the bottom underneath with about a billion slits to get the curves. Handy to be able to pull each little tab of covering super tight and then lock it on with the hot trim sealing iron
@richardwylie07 5 күн бұрын
@@flyboywbl exactly. I know you have a lot of experience with scallops!!
@flyboywbl 5 күн бұрын
@@richardwylie07 lol, and I just bought the 1/3 scale DR.1 🙃
@flyboywbl 5 күн бұрын
@@richardwylie07 I like the way you did it though. Will be clean on the bottom covering up all the "snips" in the covering for the scallops. Also, with a gas engine you won't have to worry about much oil seeping in between the layers like on a glow model
@None-zc5vg 9 күн бұрын
The airfoil looked like the "Clark Y".
@richardwylie07 8 күн бұрын
Yes it isn’t full scale. The real one has ‘under camber’. Very complex given it was only a handful of years after the Wright brothers.
@garthbarrett6067 Ай бұрын
Amazing workspace!
@richardwylie07 Ай бұрын
@@garthbarrett6067 Thank you.
@user-jm5mq5mi6x Ай бұрын
Looks really good ,keep the good work up🎉
@terryforbes4038 Ай бұрын
Nice power setup
@salvatorecondina2898 Ай бұрын
Très beau travail félicitations de se jolies biplant 😢
@richardwylie07 Ай бұрын
Merci beaucoup
@noahschechtel8979 Ай бұрын
Built mine 5 yrs ago..had to put 8lbs in the d Engine compartment..try and make the tail the lightest that you can!! Have a dle 85 but will be putting in an inline 120cc for much more authority and safety
@richardwylie07 Ай бұрын
@@noahschechtel8979 Thanks. Good advice. Yes full expecting to put a bunch of weight up front.
@terryforbes4038 Ай бұрын
Thanks for your efforts. My build is coming along nicely thanks to your videos. I’m a long time builder and have no problems, but a picture is worth a thousand words as they say.
@richardwylie07 Ай бұрын
@@terryforbes4038 Thanks Terry. Yes watching someone build one before you helps a lot. That’s why I find RC Scale Builder so helpful.
@markfrommontana Ай бұрын
Wow, that was a delight. What an amazing build. How many hours do you have into this project? 👍👍👍
@richardwylie07 Ай бұрын
@@markfrommontana I couldn’t tell you Mark. Coming on 3x years thus far. Had a couple of breaks during the build, but have really gained some momentum in recent months.
@richardwylie07 Ай бұрын
Hi everyone. This film brings us right up to date.
@jeffery7756 Ай бұрын
Rich, Amazing attention to detail on your build Everything looks awesome. I can't wait to see the fabric!
@richardwylie07 Ай бұрын
Thanks mate. I sent some lozenge off to be sewed today, so I will be back on the lozenge soon.
@RodneyFlysRc Ай бұрын
Beautiful Scale work, I would suggest you get yourself a good wireless Mic that works with your Video equipment.
@richardwylie07 Ай бұрын
Thank you. Yes we don’t have our picture or sound dialled in yet. Thanks for following along.
@joebravo5459 Ай бұрын
JRC 🧠🧠🧠💯💯🙏🙏🙏🙏 ❤ the lozinge 🧠🧠🧠🧠🧠🧠🧠🧠🧠🧠🧠🧠🧠💪💪💪💪💪💪thank you for posting
@joebravo5459 Ай бұрын
💯💯💪💪💪🧠🧠🧠🧠 beautiful 😍 🤩 JRC IS MAMNNN 💪💪🧠🧠🧠🧠🧠🧠🧠🧠🧠💯💯 mutch respect 🙏
@richardwylie07 Ай бұрын
For anyone watching this in the future, I neglected to thin the dope. This and the cold weather made it ‘blush’. In future episodes I crack the code!!
@leonardoconnell7161 Ай бұрын
Absolutely awesome work Rich. Keep charging forward! Lenny
@richardwylie07 Ай бұрын
Thanks Lenny. You inspire me to make it as good as I can!!
@user-jm5mq5mi6x Ай бұрын
Oh my gosh this looks so good how did you get it looking so good I really can not wait to see it finished
@richardwylie07 Ай бұрын
Thank you Ivan. Just one job at a time and eventually it looks like something. Appreciate your consistent support!!
@terryforbes4038 Ай бұрын
Nice work. I’m just starting my build of this fantastic kit
@richardwylie07 Ай бұрын
It's a great kit. Good luck!! Please reach out if you have any questions. Remember build to the parts, not to the plans. They vary from side to side.
@jaycastello1171 Ай бұрын
Really nice work!👍
@richardwylie07 Ай бұрын
Thanks Jay!!
@timmytom Ай бұрын
Looking good.
@richardwylie07 Ай бұрын
Thank you!!
@richardwylie07 Ай бұрын
Sorry I meant ‘Grease pump’… not ‘oil pump’. Sorry for the poor lighting, the next timelapse will make everything more clear.
@jeffery7756 Ай бұрын
Rich, those details look amazing. You're going to have quite an authentic model there!!! Great job.
@richardwylie07 Ай бұрын
Thanks Jeff. Wait till you see the next update. Everything is coming together!! Back on the lozenge soon!!
@timmytom Ай бұрын
Very much enjoying both your videos here and posts on RCSB. Thank you for sharing these.
@richardwylie07 Ай бұрын
Glad you like them! Wait till you see the next one. It’s all coming together!!😎
@timmytom Ай бұрын
@@richardwylie07 looking forward to it. I'll be starting to tackle my Proctor DVII in the next few months. Watching your video has given me a lot of pointers.
@richardwylie07 Ай бұрын
@@timmytom great. Will you have a thread on RCSB? If yes I’ll follow along.
@timmytom Ай бұрын
@@richardwylie07 I've never done one . My camera equipment is restricted to my mobile phone. I'll see how the first few shots turn out!
@richardwylie07 Ай бұрын
@@timmytom I only use my phone for RCSB. They are very clear.
@doug-Hakura Ай бұрын
Great work.
@DARIVSARCHITECTVS Ай бұрын
This is turning out to be one hell of a plane! Wonderful workmanship.
@richardwylie07 Ай бұрын
Thank you that’s very kind of you. I hope so!!
@DARIVSARCHITECTVS Ай бұрын
@@richardwylie07 You're not building a plane, you're building a dream.
@flyboywbl 2 ай бұрын
I put a 60cc n my 1/4 scale D7 with 24” prop. Scale prop size looks so nice
@user-jm5mq5mi6x 2 ай бұрын
Happy to see everything is going well, can’t wait to see it fly some day
@carloshenriquebins5113 2 ай бұрын
Beautiful and very light as the real one was
@richardwylie07 2 ай бұрын
Absolutely, although the fabric and dope covering is adding considerable weight.
@WalterMitty1966 2 ай бұрын
Hi Richo , looking good mate !! Always good to put a face to the builder !! lol Looks great from Blighty !! Cheers Phil Walter_Mitty on RCSB
@richardwylie07 2 ай бұрын
Hopefully I didn’t scare any young children or animals!! 🤣
@user-jm5mq5mi6x 3 ай бұрын
I’ve been waiting for this video for months❤❤❤
@richardwylie07 3 ай бұрын
So sorry it’s taken so long. I’ll try to be more consistent from now on.
@garyruxton5226 5 ай бұрын
So what is the expensive engine that you had thought about. Would like to look it up. Too bad scale Mercedes DIII engines aren't affordably available, well, we could dream, right?
@richardwylie07 5 ай бұрын
It’s called RotoMotor. I was thinking about a 130 FSI 3 cylinder. But a kind viewer has recently offered me a Zenoah G62 and a reduction drive FOC. So stay tuned.
@adamgorman7223 6 ай бұрын
On the underside of sheathing what is that white glue? If I may ask. Also how are you using the spray adhesive?
@richardwylie07 6 ай бұрын
Yes white glue. I think I used the spray adhesive to stick the sand paper to the pickle jar… to help sand the scallops.
@jeffery7756 6 ай бұрын
it's been 4 months ... I'm missing your posts!
@richardwylie07 6 ай бұрын
Yes I know. Work has been crazy. Will get back on it in Feb.
@jeffery7756 4 ай бұрын
@@richardwylie07 I'm going through withdrawal! I'm eager to see some fabric on your plane!!
@richardwylie07 4 ай бұрын
@@jeffery7756 ha ha, good news… Summer sport is over and I am getting back into it. I am out of dope however. I need a US friend to ship me some Sig nitrate dope and thinner. Or alternatively the equivalent full sized product. Could you help me? I’ll pay of course.
@jeffery7756 4 ай бұрын
@@richardwylie07 get my contact info off the aerodrome forum ... i'll see what I can do.
@CrazyDad226 7 ай бұрын
Wooo subbed to support nice 😊
@richardwylie07 6 ай бұрын
Thanks for subbing
@carlwill4056 8 ай бұрын
You for all the tips on this bill because I’m doing the same thing nice video and the music was so cool thank you so much for the tap
@richardwylie07 8 ай бұрын
Thank you for the kind comment. I am still at it... just struggling to find time with work and kids sport!!
@rperry70 10 ай бұрын
Glenn say's specificlay not to machine was the fabric. Your supposed to do it by hand with a light soap like Woolite. My next go at this, I may try to use Sigs Stix it or balsa rite to iron on glue the fabric. Keep in mind, the dope is glue, and it is really what is permanently adhering the fabric to the airframe.
@richardwylie07 9 ай бұрын
Thank you for the advice.
@BHARGAV_GAJJAR 11 ай бұрын
For a vintage craft i would just go big or go home 😊
@richardwylie07 11 ай бұрын
Yes, bigger the better!!
@abundantYOUniverse 11 ай бұрын
Wow what a plane, I built a carbon SE-5 with a six foot wingspan, and it weighs one pound 2 ounces. Thanks!
@richardwylie07 11 ай бұрын
Cool.
@collinmccallum 11 ай бұрын
awesome!
@richardwylie07 11 ай бұрын
Thank you!!
@CJBruin-wj4vh 11 ай бұрын
Really a fantastic job you are doing, so meticulous, really amazing
@richardwylie07 11 ай бұрын
Thank you so much for the support
@ritchardwilliams3874 11 ай бұрын
Thanks - great to see some detail build to help others. Far too many videos on UTube of small planes flying in a large sky miles away - not a lot of use to anyone. Really appreciate what you have done.
@richardwylie07 11 ай бұрын
Thank you … that’s what I hope to do.
@user-tg1yj5pi7j 11 ай бұрын
Successful flight !
@collinmccallum 11 ай бұрын
amazing!
@richardwylie07 11 ай бұрын
Thank you! Cheers!
@michaeldashnaw2503 11 ай бұрын
Great video! Music turned my stomach.
@richardwylie07 11 ай бұрын
Ha ha... sorry about that.
@richardwylie07 11 ай бұрын
Hey Jeff, thanks for the tip. Yes that wasn't my best work. Not sure what I was thinking. The edges seemed to clean up well once the butrate dope was applied. Otherwise I was planning to use rib tape around the edges. Let's see how it turns out.
@collinmccallum 11 ай бұрын
amazing!
@richardwylie07 11 ай бұрын
Thank you! Cheers!
@jeffery7756 11 ай бұрын
I've been looking forward to you to posting again, Great to see you back. Your fabric work looks absolutely AWESOME so far!!! Is it 4 color or 5 color Lozenge? God she is a big brute! super job!
@richardwylie07 11 ай бұрын
Thanks Jeff... you have been a big inspiration. Can't tell you how many times I've asked myself... 'what would Jeff do in this situation'?
@garyruxton5226 Жыл бұрын
The Brits and Europeans are always wanting Americans to change to the way THEY do things. Very selfish and sorry, but many of us call it British arrogance. Besides Americans don't want to be British. The Colonists considered themselves British until the English Tea Act tax. That's when we began switching to coffee so we weren't British anymore.
@michaelbolch3786 Жыл бұрын
Doing well Richard, I’ve nearly completed a Busa 1/3 DR1 and had some twisting in the control surfaces as the dope tightened. I recovered them and paid more attention second time around. Just be mindful of that especially in your wings.
@richardwylie07 Жыл бұрын
Will do. Thank you.