I'm having trouble accessing the RA part of the mount. The RA faceplate isn't coming off due to the latitude adjustment bar being in the way, and I can't seem to remove as easily as you did in your previous video. Can you provide any information/hints on how it is removed?
@Magnus_Magnusson_70213 сағат бұрын
So I found a Cinetic animal the big one upright in the trash it was brand new it just had a clog of paper in the hose which I removed The vacuum was probably used about three or four times. I didn't think they pick up was all that great on it and then I started fiddling around with it and ended up removing that filter on the left hand side of the ball if you're looking at the vacuum from behind and ever since I removed that filter the suction has like doubled and I've never had an issue from the vacuum and have never had any dust issues in the motor doesn't run hot like it was running with that filter in it so as far as I'm concerned that filter is not necessary and will lead to an early breakdown of the motor or overheating or terrible suction power. I got it for free so I don't really care what that filter was for All I know is that I've been using the vacuum now for 3 or 4 years and it runs perfectly fine and doesn't get hot and has super suction so not sure what I did but it was for the better!
@gavansalter321219 сағат бұрын
What tent are you using to get out of the sun???
@TheGregWallace3 күн бұрын
Time for you to move to a red state.
@JeliSpace2 күн бұрын
Well this was in Texas sooooo yeah
@TheGregWallace2 күн бұрын
@@JeliSpace to many folks from California are moving to Texas and bringing their crap ideas with them....
@julianneandrews13567 күн бұрын
You’re a godsend, thank you!
@JeliSpace2 күн бұрын
Glad it helped you
@BatuOzmen9811 күн бұрын
Thank you for the video, Just maybe next time You can dissassamble the motor unit. Right now Altough I can connect to mount the motors did not respond, I m trying to diagnose the problem, Do you know where can I buy the specific parts of the mount ?
@deonster114 күн бұрын
Was there much of an improvement after pulling apart and regreasing the mount? Thanks for the video!
@woody510922 күн бұрын
I almost bought one of these instead of EQ6r Pro, glade I didn’t, looks flimsy and poorly built 😬 good video though.
@ashishkushwaha704526 күн бұрын
Hi, how would you make up for the fact that the telescope might not be facing forward exactly. For example, extreme case, let's say the tracker is completely polar aligned and the telescope is pointing to the east (so right). When we make it point to the Sun with your method, you will have to turn the tracker 90 degrees away from North and the tracker won't be polar aligned anymore. How do we take that into account? Does it not matter?
@JeliSpace24 күн бұрын
Pretty straightforward, on occasion you will send the slew command to recenter on the sun and the correct the image using your adjustment screws. Making adjustments made to recenter the image will correct those imperfections. That make sense?
@OxizeeАй бұрын
Dont have problems with metal and magnetic interference?
@JeliSpace24 күн бұрын
I did not and again it's just to get you close enough.
@geonick69Ай бұрын
Sorry, didn't quite get the bit where you can adjust the reticle without taking the whole unit apart. Can you please explain? Mine is like 30° counter clockwise off . . .
@JeliSpaceАй бұрын
Yeah I will make a new video real quick and get it up for you. So please be looking for that shortly, thanks so much!
@geonick69Ай бұрын
@@JeliSpace, thank you!
@peacequest69Ай бұрын
in T-Shirt with a wool hat 🥴
@JeliSpaceАй бұрын
Bald head and all... when is a slight chill springs is really all that's needed lol just s little help up top
@mariamena3885Ай бұрын
It’s funny
@JeliSpaceАй бұрын
Glad it got a laugh!
@charlesichkanian3088Ай бұрын
excellente vidéo trés instructive....thanks !
@JeliSpaceАй бұрын
I'm glad it helped! Thanks for the kudos 👏
@OfficialSphereballsАй бұрын
Can i see it with my 15x52 binocular?
@JeliSpaceАй бұрын
Yeah I can see them with my 8x56 so you should be good!
@anabella.a5Ай бұрын
Hola, puedes compartirme el link de la brújula?, leí en tus comentarios que tiene para identificar el polo verdadero. Las apps que he utilizado no las tienen. Un saludo desde Argentina. P.d.: me encanta que puedas disfrutar tu equipamiento en la vereda, aquí eso es imposible por los robos 🤦🏻♀️😒.
Remove the sticker and you can gain access to the hole that leads to the backlash adjustment screw
@JeliSpaceАй бұрын
Yeah I mention it on comments and link to a video updating that info. Thanks for the heads up though!
@aa.69762 ай бұрын
just clean the thing...what a joke //its a mirror..thats it,,,,its not a scientific surgical procedure,lol...funny man
@JeliSpace2 ай бұрын
Well its a little more complicated than that. Mirrors we use for checking our appearance have the reflective materials on the back of the glass making them very robust to cleaning. However with a reflector telescope it is a very fine coating of aluminum on the surface, it is very easy to damage it. So yeah a little extra care is called for in this case.
@shrekshrek2 ай бұрын
what camera are you using
@JeliSpace2 ай бұрын
Zwo 585mc
@keithjohnson65032 ай бұрын
I noticed the backlash adjustment screw at the end of the video does not have a hole in the case unlike the hole behind the label, if backlash needs adjusting to this screw it might be easier drilling a small hole into the plastic case to enable any adjustment of the screw rather than having to remove the case once the warranty has expired? Thanks for the video & clear skies from across the pond.
@JeliSpace2 ай бұрын
That is an amazing idea and I think I will do just that! Thanks!
@kevincarter71022 ай бұрын
If you could scratch the Mirror by pushing too hard on a cotton ball, shouldn't we be wearing nitrile gloves. That way you don't possibly scratch the mirror with something like, oh I don't know, a fingernail?
@JeliSpace2 ай бұрын
That is a great call out!
@kdr9552 ай бұрын
The original shipping box works best.
@JeliSpace2 ай бұрын
Got it used so didn't have it. At least for this one in addition this one is weather proof.
@hael86802 ай бұрын
I didn't know that sharpcap could colorize on the fly. Thank you the video.
@JeliSpace2 ай бұрын
Oh yeah! I am learning all the crazy things it can do. I should make a video on it. Make sure to try it on the moon it is amazing!!
@RodrigoZeba3 ай бұрын
Thanks for the video! I was looking for a video on how to open the mount and there's a lot for the AZ but this is the only one that I found for the EQ. My GTi started to behave oddly... Not stop slewing when get to target or doing three point polar alignment in N.I.N.A, for example . I leave by the ocean and I'm concerned about oxidation... Going to open it up to check things and maybe regrease it. Thanks!
@JeliSpace2 ай бұрын
I am glad it helped, not sure if you have opened it up yet but I just posted a video of me doing just that. Make sure to check it out and lets compare notes!
@rainydaysatyr3 ай бұрын
0:01
@mikeanderson87973 ай бұрын
This is more syncing your telescope alignment vs polar alignment.
@BigBadLoneWolf3 ай бұрын
I downloaded an app, and found it to be 1/2 deg out on alt, and 8 deg out on azimuth when i used it, then polar aligned with polaris
@britneygarrison3 ай бұрын
🌞
@petervargas25013 ай бұрын
Nice.
@JeliSpace3 ай бұрын
Thank you! Cheers!
@DeereX7483 ай бұрын
Do you need to factor in the magnetic declination at your location when using this method? In my area, magnetic north is around 4 degrees west of true north. Is that enough to matter?
@JeliSpace3 ай бұрын
On the compass app I have you can click on an option that shows true north. I am 5 degrees off so similar to you. I would try to make it as accurate as you can, the adjustment after that should correct the difference but only offers so much room.
@MCR-wq6zb3 ай бұрын
Thanks, that actually helped me. 😊
@JeliSpace3 ай бұрын
Glad to hear it!
@rwoodin33 ай бұрын
Great video that provides some vital tips. I would not have known about the business card as feeler gauge step! I'm taking my Meade 10" SCT off the pier and putting my SkyWatcher Quattro 250P back on. I want to clean the mirror before doing that. I just bought a GSO 2" Barlow lens that I'm hoping I can get focus with, for continuing to image galaxies, at a longer focal length with greater magnification, while they're in season! I found that the 250P reflector focuses on stars and DSO's soooo much sharper than the SCT it's no contest. Autofocus on SCT gives best focus star size between 7 and 10. The 250P reflector gets stars autofocused to between 2 and 5. Thanks again for the great info!
@JeliSpace3 ай бұрын
Thanks for the kind comment Goodluck with galaxy season I know I will be getting ready for that after the eclipse 😊
@MrBiscuit-yx5nd3 ай бұрын
Literally my dream telescope😢❤
@JeliSpace3 ай бұрын
I got mine from a gentleman in my astronomy club. If you haven't joined one and have one in your area I would recommend it if you can!
@Duneadaim3 ай бұрын
i will be in the center line of the eclipse.. Can i look through normal binoculars (unfiltered) during the totality? maybe stop short of the end by 30 seconds for safety?
@JeliSpace3 ай бұрын
I will refer you to my astronomy clubs safety video for the eclipse it does cover that topic in there. It is well done video and has some other interesting call outs in there, cheers and clear skies!! kzfaq.info/get/bejne/iMp_nZh418rXho0.html
@zhoke493 ай бұрын
Thanks! The little green piece of hardware is out of stock but I have a long enough dove tail adapter on my lens so I can mount the phone to it using the adapter.
@JeliSpace3 ай бұрын
That's great I'm glad you found a solution 😀
@zhoke493 ай бұрын
@@JeliSpace BTW I’m in Rochester NY right in the path of totally. Right now prediction is clear skies!! 😎
@JeliSpace3 ай бұрын
That's awesome I'm in Dallas Fort Worth area so I'm also in the path, however current forecast is not looking so good😢 hope you get some great photos of it!
@zhoke493 ай бұрын
I am using an app PS Align Pro. Was 2.99 and worked great yesterday.
@amp2amp8003 ай бұрын
Excellent!
@JeliSpace3 ай бұрын
Thank you! Cheers!
@TheValiantZero3 ай бұрын
How did the chair fare on your trip? Do you recommend it, or was it more of a burden? Have you found something better?
@JeliSpace3 ай бұрын
Actually worked well for lines, being still height it was ready to get back to walking out moving around. I then used it at work in a rough environment and it held up perfectly till it went missing...
@britneygarrison3 ай бұрын
thanks for the info! enjoy the eclipse!
@JeliSpace3 ай бұрын
Thanks! Will do!
@xro58413 ай бұрын
Like I would trust a phones GPS. But yeah I guess. Why not just use a compass?
@JeliSpace3 ай бұрын
Mostly everyone has a phone. Compass would work too as long as you had it stand off enough from the mount so the stepper motors didn't effect it. With the GTI and the phone mount it's far enough away, at least it was for me.
@moyokoyama92924 ай бұрын
着地前に天国行きとかアホ草
@jesuschrist22844 ай бұрын
These bags cost a lot for a 500 dolar mount
@JeliSpace4 ай бұрын
Eh they aren't too bad, to each their own. For sure could find cheaper options but they have held up well during lots of use and transport so if it is traveling frequently I recommend the extra expense at 12.50 each with a few left for other projects (which I have used them for)for storage alone though it might be overkill, I could see that.
@jesuschrist22844 ай бұрын
@@JeliSpace i need to have a better look online, ty
@NikonJax4 ай бұрын
I like this! I also see you are using GSS. Can you do a video on installing that with the GTI? Thanks for great videos :)
@JeliSpace4 ай бұрын
I will see what I can do, was there a particular issue?
@Aaston1634 ай бұрын
Yulbasini erken kutlayan insan artık kutlayamiycqk mutlu yıllar
@myklgylmata18014 ай бұрын
Probably, that’s why there is no extra footage.
@JeliSpace4 ай бұрын
😂
@paulgrimm4 ай бұрын
Did that really explode?
@JeliSpace4 ай бұрын
lol honestly I have no idea but for the sake of that guy and his team I hope not!
@user-ew6oz5jy6i4 ай бұрын
I doubt it did not explode because the impact was very close
@youngchang5974 ай бұрын
may I ask what software you use? I am a just novice. Thanks.
@JeliSpace4 ай бұрын
Using Nina and for capture Sharp Cap Pro.
@strykker6664 ай бұрын
What model is the SVBONY? SV503 80mm? I also have a SA GTi mount, and was looking for a scope with a longer focal length than my RedCat 51. (Yes, I know there is a quality difference there). How well is the mount handling the weight?
@JeliSpace4 ай бұрын
Yes correct it is the 503 which is a er doublet. So there's a little bit of blue fringe on starts but it's subtle and not to bad. Focal length is 560, with reducer 430. The mount handles it perfectly fine I'm right at the limit and 300 second exposure aren't an issue. You can see the picture I took of M45 and M31 not to long ago.
@boycefitzgerald4 ай бұрын
Nice!
@SSIGreenHeron4 ай бұрын
I'm not familiar with SkyWatcher GEMs. I have Orion, Celestron AVX, and ZWO AM5 mounts. Did you use Sidereal or Solar tracking mode when you did the goto for the Sun? Also, did you stay in Sidereal or change to Solar tracking? It never dawned on me to approximate PA and then use the adjusters to finish the alignment. I usually struggle with the buttons when trying to get a daytime GEM to track the sun.
@JeliSpace4 ай бұрын
I'm using Nina and a plug in called orbitals to slew to the sun when it sends that command it auto starts tracking at the rate that's appropriate for the target, including comets. So yeah solar but the telescope controller that Nina talks to is green swamp server and I can change the taking rate there as well. Either way I would setup any sunny day you can and practice.
@SvbonyOfficial4 ай бұрын
Nice RIG bro. Are you in the the path of the total solar eclipse?