Bike Life

Пікірлер

@HT-tj1lz Ай бұрын

自分のグランドアクシスと同じエンジンですね

@Radness1001 Ай бұрын

Yes. 4vp. Great motors

@billystelling1 Ай бұрын

Those look super strong and stylish and with headlight grills over, would alleviate any gaps I guess? Clearly just one setting though, no bright and dim, just bright 24/7?

@Radness1001 Ай бұрын

Yes, both lights come on simultaneously. Could wire them up individually. I had the little grilles on, but LEDs are recessed quite far back, so didn't look right

@lordx4542 2 ай бұрын

Недавно решил разобрать свой yamaha grand axis 100 из-за подозрительных звуков при работе двигателя.Пробег был 30 тысяч километров.Когда достал поршень,он в точности повторял состояние поршня как у вас на видео,только без нагара.Интересно,почему так произошло? Я подозреваю,что всему виной,недостаточная смазка двигателя встроенного маслонасоса,потому,что вместе с поршнем у меня пришли в негодность коренные подшипники коленвала.Подшипники стояли японского производства TMP и они не могли так быстро выйти из строя.Что думаете на этот счет?

@lordx4542 2 ай бұрын

Зачем его отключать? почему вы считаете,что лучше подавать готовую смесь для этого мотора?

@Radness1001 2 ай бұрын

The pumps fail and over oil. And now been discontinued.

@ArsenGevorkian 2 ай бұрын

Thank you

@Radness1001 2 ай бұрын

My pleasure!

@barnesandrewj 3 ай бұрын

Logically explained topic from you yet again! Appreciate you bro!

@SoloAmatori2t 4 ай бұрын

Ciao 🖐, che marca e il kit pistone? Io ho un aerox 100 2t e sto cercando una soluzione 😅...

@Radness1001 3 ай бұрын

It's an unbranded Chinese kit - it was rubbish. Rather get a TWH or KN Planning. japan.webike.net/SavedProductsList/ tunescoot.site/bws-100-engine-parts/145-4vp-big-bore-56mm-twh.html

@SoloAmatori2t 3 ай бұрын

@@Radness1001 a ok, grazie 🙏 molto gentile 👍 Buona giornata.

@bennocturno2514 5 ай бұрын

Donde puedo comprar las tapas azules o plásticos ? Saludos

@Radness1001 5 ай бұрын

Blue plastic lids?

@barnesandrewj 7 ай бұрын

Very cool informative video. Appreciate you!

@barnesandrewj 8 ай бұрын

Appreciate you, thanks a lot bud!

@Radness1001 8 ай бұрын

Glad you find my vids helpful. 💪🏼

@ruwaynefilmalter7717 8 ай бұрын

I have a 46.8gram total rollers with stock everything, what is the best setup of springs for my bws 100

@Radness1001 8 ай бұрын

Depends on your bike and what you want. Top speed Vs acceleration. I run 54g on mine.

@BKDream21 8 ай бұрын

what cylinder is it?

@Radness1001 8 ай бұрын

Stock, bored out.

@BKDream21 8 ай бұрын

@@Radness1001and what crankshaft?

@Radness1001 8 ай бұрын

Need to double check. 52.8mm or thereabouts

@globalpanorama 9 ай бұрын

Benzin filter, electrict,

@guembo Жыл бұрын

my pilot jet broke in place and now idk how to remove it

@Radness1001 Жыл бұрын

Best to take it to engineering shop to be removed professionally.

@andysolomon1207 Жыл бұрын

Hi from CPT, I’ve been working on a bws and am in need of some help from an experienced 2 stroke mechanic. Anyway I can contact you other than KZfaq?

@Radness1001 Жыл бұрын

Sure, 082 784 0851

@r_3_d_m_u_r_d_3_r-_-25 Жыл бұрын

Hi i also have a yamaha bws 100cc and its having trouble starting i rode it and it suddenly died on me but when i turned handle bars right it cut out and now it wont start at all

@r_3_d_m_u_r_d_3_r-_-25 Жыл бұрын

Its had a new supressor cap spark plug & stator think its electrical do u think you could help me please bo garage wants to touch it 😢😢

@Radness1001 Жыл бұрын

@@r_3_d_m_u_r_d_3_r-_-25 It's a difficult thing to assist with, without seeing tenth bike. I'd start with the basics, check that the bikes getting fuel, air and spark. Go from there.

@Radness1001 Жыл бұрын

Check the ignition coil is fixed firmly and making a solid connection to the frame - and the ignition barrel is making a solid connection too - black wire with white line - it's separate to the main harness - make sure it's still connected - could have pulled out when turning.

@TheWeekendWarrior101 Жыл бұрын

I've just bought myself a BWS... living in JHB...where is the best place to source spares mormal maintenance fluids etc.

@Radness1001 Жыл бұрын

I use Lines for my OEM bits. But the aftermarket game is, good albeit tricky - all are imports.

@TheWeekendWarrior101 Жыл бұрын

I'm in JHB ...if I'm to take my bike down to the S.coast on holiday...would I need to worry about the jetting?

@Radness1001 Жыл бұрын

No, if your bikes' stock. Yes if it's got a pipe, cone filter and jetting that's been for setup for up here.

@TheWeekendWarrior101 Жыл бұрын

Where would one buy these upgraded parts?

@Radness1001 Жыл бұрын

I've got if you're in RSA.

@TheWeekendWarrior101 Жыл бұрын

@@Radness1001 yes I am

@ruwaynefilmalter7717 Жыл бұрын

Wait what do i do after i pulled the autolube gear off?

@Radness1001 Жыл бұрын

Blank off the oil feed to the carb. Drain the fuel tank and add 1:32 ratio of 2 stoke to petrol.

@lordx4542 2 ай бұрын

@@Radness1001 My 2-stroke engine oil drum says 1:20 mixture ratio. And it may vary depending on the manufacturer of the oil you buy. In my case, this is the French oil "IPONE Samurai". What to do in this situation?

@Radness1001 2 ай бұрын

@@lordx4542 Yamaha recommends 1:32 same as their MX bikes yz125 & 250

@germopardanen6324 Жыл бұрын

If I have a minarelli motor and other things too from minarelli then can I put malossi rollers in?

@Radness1001 Жыл бұрын

Malossi only works Malossi parts. So OEM Yamaha rollers won't work in Malossi variator.

@germopardanen6324 Жыл бұрын

@@Radness1001 I got malossi rollers from a friend but i have a minarelli motor so i dont have anything to do with them, thank you!

@onitutu Жыл бұрын

Which combination of roller weight (how many grams?) - spring (2000rpm?) - Little clutch springs (the 3 little ones) for the best all around bws? And also, if the BIG spring is 2.000rpm, the 3 little ones have to be also 2.000rpm? What happen if i mix them? Like the big one 2.000rpm and keep the 1.000rom blue ones inside? Thanks a lot ! Loved your video and explanation

@Radness1001 Жыл бұрын

Yes, can mix springs. Std, big spring and x3 2000rpm small springs - rollers ±36g total. This setup is common with a performance exhaust. 2000rpm big spring, and x3 2000rpm and x3 2000rpm small springs - rollers ±50g total.

@user-jk5be5qn1l Жыл бұрын

I am sure that it is a video that contains valuable information but I do not speak English😕

@Radness1001 Жыл бұрын

Try activating the subtitles - it should translate to your language.👌🏾

@user-jk5be5qn1l Жыл бұрын

@@Radness1001 There is no only English Anyway thanks for your efforts

@YouCantSawSawdust Жыл бұрын

My dear Mr.Riggs. You could not even give me a PUCKING TEEKIT.

@shaunsobey4765 Жыл бұрын

Howzit .is there a way I can contact you for some advise regarding the lil bws looking to get a pipe variator kit and new torque driver just to get her going nicely ..based in capetown 👌

@Radness1001 Жыл бұрын

Sure. WhatsApp 082n784n0851

@shaunsobey4765 Жыл бұрын

@@Radness1001 awesome 👌 thanks

@shaunsobey4765 Жыл бұрын

Dig your content just got my hands on a lil bws looking to make it move a lil faster .

@Radness1001 Жыл бұрын

They're such great little bikes. Best scoots ever made I reckon.

@shaunsobey4765 Жыл бұрын

They are awesome but My one is a little lazy definitely going for the variator kit and lighter rollers also the 1500rpm or 2000rpm torque driver springs just want a bit more on the bottom end ..

@Radness1001 Жыл бұрын

@@shaunsobey4765 go for slightly lighter rollers and a skimmed and profiled head. And maybe a big bore kit. 👌🏽

@mitchellharty3311 Жыл бұрын

Excellent explanation video thank you! Struggling to find CVT performance parts for my BWS, based in KZN

@Radness1001 Жыл бұрын

I'm in JHB. I bring in my own bits. Will be here in Jan. 👌🏼

@st3rg Жыл бұрын

buy a 50$ ultrasonic bath you will enjoy the ease and speed of cleaning

@Radness1001 Жыл бұрын

I had one, it packed up after 5 months. No it's elbow grease.💪🏻

@user-qv2wt8pp1q Жыл бұрын

Completely useless video

@mehmetsisman219 Жыл бұрын

how many Gr of oil does it take bws 100

@Radness1001 Жыл бұрын

110ml

@Luca-cz9qd Жыл бұрын

Where do you get your exhaust pipes from

@Radness1001 Жыл бұрын

PRD and PVR - both made in South Africa

@rionsteenekamp6481 2 жыл бұрын

Love the conversion. Maybe you should make retrofit plug and play kits and sell them. Also, is that an E39 i see in the garage?

@Radness1001 2 жыл бұрын

Yup it's an E39. I've given it loads of thought, but the connections are a problem. Don't want anyone to cut into their harness.

@rionsteenekamp6481 2 жыл бұрын

@@Radness1001 540 or M5? I love me a nice E39

@Radness1001 2 жыл бұрын

Neither. 530d ///M sport. It goes! But it's no ///M car. Used to have an e34 M5.

@rionsteenekamp6481 2 жыл бұрын

@@Radness1001 Just as nice! Ive got a 523 and absolutely love it. Ive got some vids on my channel

@rionsteenekamp6481 2 жыл бұрын

Love the conversion. Maybe you should make retrofit plug and play kits and sell them. Also, is that an E39 i see in the garage?

@ismaeeldealmeida8004 2 жыл бұрын

Hi, do you perhaps service these bikes for other people, I have a bws that needs a service looking for someone in joburg

@ismaeeldealmeida8004 2 жыл бұрын

@@Radness1001 can I have your business name or contact details

@arsenii420 2 жыл бұрын

Стоит ли брать под стант?

@drscottbarker5676 2 жыл бұрын

Hi, where can I get springs and rollers?

@Radness1001 2 жыл бұрын

Ebay - look for minarelli or Chinese 2 stroke rollers - will fit a BWS, Nitro or Jog 90.

@P2DAPIPE 2 жыл бұрын

Much difference ditching the factory airbox and putting a pod style airfilter?

@Radness1001 2 жыл бұрын

Oh yes. Std pipe and airbox are very restricted.

@standardseeker878 2 жыл бұрын

Hi Ryan. Would it be possible to do an onboard ride of the bws 100? seems like all the upgrades are beastly.

@Radness1001 Жыл бұрын

I will! Busy rebuilding the engine - burnt a hole through the piston. Send me your what app no, I'll send you a vid there.

@skuaheadbrad 2 жыл бұрын

Hey mate Any chance of you posting a video of it running down the street or even just on the stand on the gas want to know what it’s capable of before going all out cheers Awesome build !!!!

@Radness1001 2 жыл бұрын

Ye, I've got a few will upload.

@skuaheadbrad 2 жыл бұрын

Thanks mate legend 👍 much appreciated

@skuaheadbrad 2 жыл бұрын

mate also what brand variator are you running and what weight rollers ? cheers

@Radness1001 2 жыл бұрын

@@skuaheadbrad running the stock variator. Total weight of rollers is 58g

@skuaheadbrad 2 жыл бұрын

@@Radness1001 thanks mate cheers can't wait to see it runnig !!!!!

@thirdstone4107 2 жыл бұрын

did you change the jetting ?

@Radness1001 2 жыл бұрын

Yup, pilot and main - but only with an aftermarket cone filter. If you run the std airbox the jetting remains as is. Changed the rollers too, lighter to match the pipes higher power band.

@placidovargas2443 2 жыл бұрын

Hay good video where du yo get the parts for your BWS 100

@Radness1001 2 жыл бұрын

Ebay, aliexpress and maxiscoot

@calknowles2716 2 жыл бұрын

What stroke crank is this running ? Any benefit between 51 to 53 mm stroke ?

@Radness1001 2 жыл бұрын

Not sure of the exact length. But it's the biggest crank available before you need to machine the cases. To give you an idea, the 56mm piston with the standard crank is 117cc. With the same 56mm piston and the stroker crank it's 133cc. That's 33% bigger than stock. The bike absolutely flies, pops wheelies on command.

@29Nussi 2 жыл бұрын

2000 rpm spring? What is this? The clutch springs can be measured in rpm but not der torque driver spring. you can measure it in kg

@yulmerced4434 2 жыл бұрын

Great video actually first video I see for a cvt tranny now I have a question I travel to colombia alot I have a 2012 bws100 down there now sometime the hills are soooo steep I have to get off the bike I can't find a trustworthy garage to do maintenance and yamaha don't service this anymore what would I need to change on the cvt to keep high torque at lower speed?

@Radness1001 2 жыл бұрын

You'd need to get lighter rollers fitted. It may need a set of fresh rings too if it's struggling up hills.

@yulmerced4434 2 жыл бұрын

@@Radness1001 I will start there. Thanks

@yulmerced4434 2 жыл бұрын

@@Radness1001 are you referring to piston ring?

@Radness1001 2 жыл бұрын

@@yulmerced4434 yup. sounds like your compression is low

@yulmerced4434 2 жыл бұрын

@@Radness1001 sleeve and piston kit is brand new a few months ago the carb was making a bad mix I talk to a guy at a machine shop he said he can make it 115cc with a new piston so hopefully today I'm getting a new clutch new rollers rear brake a d 15cc more hopefully this fix my issue.

@GeorgeBGP 2 жыл бұрын

what diameter are the rollers at the variator?

@Radness1001 2 жыл бұрын

15x12

@GeorgeBGP 2 жыл бұрын

thanks

@GeorgeBGP 2 жыл бұрын

I want to buy a 100cc aerox, what do you think about this 100cc engine?

@Radness1001 2 жыл бұрын

@@GeorgeBGP same as the BWS engine, great little engines. 👌🏼

@GeorgeBGP 2 жыл бұрын

Thanks

@garethkilleen2079 2 жыл бұрын

Hi Ryan Random question do you know what wattage the standard bulbs are? I went to Yamaha but they only have 6 watt

@Radness1001 2 жыл бұрын

I have 25W. Not OEM Yamaha bulb tho. Have you looked what the manual reckons?

@Radness1001 2 жыл бұрын

OEM is 20W

@garethkilleen2079 2 жыл бұрын

@@Radness1001 thanks bru

@enelra448 2 жыл бұрын

Where can I purchase those LED lights in CT Pls

@Radness1001 2 жыл бұрын

Good question. Have a root about on takealot, 100mm led Spot lights.

@billystelling1 Ай бұрын

Yup Takealot have them R329

@standingprod3074 2 жыл бұрын

Hi Ryan Firstly, I wanted to tell you that you make great videos ! I also have a bw's100cc and I would like to know what is your engine configuration on yours? Thank you !

@Radness1001 2 жыл бұрын

kzfaq.info/get/bejne/i7iVn9ei1sWZaY0.html Take a look here bud. 👌🏻

@matthewuhlmann7781 2 жыл бұрын

Great informative video👍 I recently got a 2008 bws, stock standard with 18000kms Bike is very sluggish until 60kmh (compared to my sym 125 scooter) then pulls well, what could the problem be? I’ve cleaned the carb, cleaned the air filter and checked the rollers (8.5g), it also seems to have a “dead spot” at about 3/4 throttle. Any advice is appreciated

@Radness1001 2 жыл бұрын

Chances are it's our torque driver thats worn. What exhaust are you running on it?

@matthewuhlmann7781 2 жыл бұрын

@@Radness1001 standard exhaust, it is a little rusted out :( but I am looking for a performance one. Will check the torque driver out this afternoon

@matthewuhlmann7781 2 жыл бұрын

@@Radness1001 Do you know where I can get a 2000rpm spring and other performance parts?

@Radness1001 2 жыл бұрын

@@matthewuhlmann7781 I've got 114cc big bore kits and springs. Where are you based?

@matthewuhlmann7781 2 жыл бұрын

@@Radness1001 I’m from Pietermaritzburg

Ең жақсы KZfaq

Пікірлер