Nice but expensive. Rather buy hobbywing esc. Other said it overheat quickly on slow crawling
@4lb11415 күн бұрын
안녕 RHINO YUE ON 사용중이야 S095 Shock 판매 안하는거니 구매 하고 싶어 구매처 얼려줘 여기 한국이야
@patricer.902218 күн бұрын
Hi, This w1 is a new chassis not yet available ?
@Real_rescuerАй бұрын
Would it be worth adding a touch of thread lock to the screws, especially with it being metal on metal??
@marknauman53Ай бұрын
Music sucks. Nice rig.
@kenricknelson310Ай бұрын
How can i get that truck body???
@kenricknelson310Ай бұрын
What kind of truck body is that???Where did you get it from???
@dinglediscoАй бұрын
Goodbye drivetrain 😂
@philtobin9510Ай бұрын
Aliexpress?
@RhinoRCАй бұрын
rctimer.com/rhinoescplug-p1204.html
@copyminkeyАй бұрын
Where do i find bodies for these i love this one any info would be greatly appreciated 🙏
@copyminkeyАй бұрын
Im building one of these and I'm just piecing it together, my issue is where do i find the little body cover? I notice all the pre-built crawlers come with the body cover installed but i cant find any shop that offers Just the cover itself. Would anyone happen to know where i can purchase one? Loved the video im extremely excited to build this, it'll be my very first RC Crawler hopefully i picked the right one 🙌 im betting i did but since its my first everything is new to me and maybe this is to advanced either way ill figure it out and get this beast tamed.
@TheOtherSock-728Ай бұрын
Cool. What body is that? What shocks are those?
@JohnGrenoble3 ай бұрын
I’ve been trying to determine if it is legal for WRCCA and from I can tell the 13.3” WN is outside of the 12.5 sportmans class. Would nice if it did since they call it a sporty. I’m checking to see if hardcore RC and make a custom set of links reducing the length by .5” from and rear w/o needing to worry about dealing with driveshaft lengths
@JohnGrenoble3 ай бұрын
I’ve been trying to determine if it is legal for WRCCA and from I can tell the 13.3” WB is outside of the 12.5 sportmans class. Would nice if it did since they call it a sporty. I’m checking to see if hardcore RC and make a custom set of links reducing the length by .5” from and rear w/o needing to worry about dealing with driveshaft lengths
@davideos89273 ай бұрын
Quais peças preciso comprar para construir um desse?
@RhinoRC3 ай бұрын
We have RTR edition list
@Island-RC3 ай бұрын
I ordered a front axel and yue one kit minus axels and eleronics. I already have your 80 Amp esc and a stock rear capra axel with link riser for now April 17 I may have my build started
@FPVDiverBomber3 ай бұрын
I bought an RTR Rhino - I wonder if I will get a pink top?
@keldonator2 ай бұрын
I got the pink top in my kit version, you can have it if you pay shipping lol
@sigurdtronsmo50584 ай бұрын
What battery are you running?
@RhinoRC3 ай бұрын
4S 850mAh
@rcrockcrawler4 ай бұрын
Love your crawlers 💥
@jebrc4 ай бұрын
Im needing help with the bec on a 80a esc it hasn't worked since i got it new?
@RhinoRC if thats the manual i have been in this aswell as fpv hobby for years when i first got new the bec never worked not even right out of the box it dont matter where i put the dip switchs there is no voltage coming out from the esc if i run my receiver off a bec the esc works it just dont put out any voltage at all not enough to power the receiver nothing it reads 00.6 no matter where the dips are set to i think the bec on mine is just no good
@jebrc4 ай бұрын
Do you guys have a email or something im having some real issues with the 80a the bec has not worked since i bought it any help would be great
@RhinoRC4 ай бұрын
Any questions on it?
@giopirmisashvili55144 ай бұрын
❤❤❤❤❤❤
@slapdickracing4 ай бұрын
MINE JUST SHUTS OFF V1.99 POST CALIBRATION TOUCH ANYTHING IT POWERS DOWN...
@pandacrawler6x64 ай бұрын
Awesome rockcrawler rc and Great Driving skills 💪🏻🏆👍🏻 🐼👌🏻
@RcCar-hn9rv4 ай бұрын
Nice rock crawlers 🛻👍
@yrusonoz55744 ай бұрын
Nice run
@Ty.T3DRC4 ай бұрын
How can I contact you to get a set of your front axels?
@RhinoRC4 ай бұрын
www.rctimer.com/rhino-capra-axles-p1175.html
@Ty.T3DRC4 ай бұрын
How can i contact you? Would love to run ur axels on one of my comp rig. Love supporting small businesses!
@jebrc4 ай бұрын
im running mine in a trx4 sport with a 1900kv injora outrunner and it gets real hot the esc and the connections for the motor are getting super hot any reason why? also i have no voltage from the bec no matter where the dip switches are set
@marcosdo9955 ай бұрын
Is this chassis and links legal for wrcca competitions ?
@RhinoRC5 ай бұрын
Where can check the rules?
@CraigVeness2 ай бұрын
WRCCA rules for Sportsman: 2.5 - Sportsman (aka. Shafty/Sporty) • 2.5.1 - Vehicle wheelbase is limited to a maximum of 12.5”/317.5mm. • 2.5.2 - Vehicle track width is limited to a maximum of 12.5”/317.5mm. • 2.5.3 - Wheel/ rim is limited to 2.2”/55.88mm or smaller at the bead surface. Wheels may be modified, provided that the tire bead surface does not exceed 2.2”/55.88mm in diameter. With a tire mounted, no exterior component of the wheel, including but not limited to, the bead lock ring shall exceed 2.55"/64.77mm. • 2.5.4 - Tires may be modified from other size tires using only pliable rubber, but must not exceed a total uncompressed outer diameter of 6”/152.4mm. • 2.5.5 - Vehicles are limited to 2-wheel steering only. • 2.5.6 - Bodied Vehicles only, typically a lexan body that is removable from chassis. Bodiless vehicles are prohibited. Bodies must be of original width and resemble a 1:1 vehicle with cab, door, and hood panels. Vehicle “body” measurements must be greater than or equal to 8"/203.2mm overall length, 3"/76.2mm overall width and 3"/76.2mm overall height. • 2.5.7 - Vehicles are limited to the use of 2 radio channels (one for steering & one for throttle) only. Neither channel can be used to perform more than one function. Radio systems with more than 2 channels are allowed, but only 2 channels may be used to control the vehicle. • 2.5.7 - Vehicles are limited to 1 ESC, 1 Motor & 1 servo only. • 2.5.8 - Motor must be chassis mounted. Motor mount cannot be part of or directly coupled to an axle.
@TheHammer5 ай бұрын
I've got a 40a rhino esc that I cant get to calibrate. It will go through the tone after full throttle and brake, but never makes that last tone when done. I tried reversing two wires and reversing throttle in the radio and nothing changed. Can you help?
@reyjr36085 ай бұрын
Im new in this,may i ask what's special on this tires?.. thanks 😄👍
@RhinoRC5 ай бұрын
1.9 inch, 120mm*43mm size
@reyjr36085 ай бұрын
Amazing..is there a RTR like this version?..thanks 😄👍
@RhinoRC5 ай бұрын
rctimer.com/yue-rtr-p1192.html
@natevanbelois45635 ай бұрын
Is this a new chassis from Rhino? it is not on the website.
@RhinoRC5 ай бұрын
Yes, new YUE LCG chassis
@RhinoRC5 ай бұрын
rctimer.com/yue-rtr-p1192.html
@keldonator4 ай бұрын
Those rear links look pretty thin, are they titanium or steel? I'm considering this or the Yue one v2
@79rmarques5 ай бұрын
Eagerly waiting for mine to arrive!
@reyjr36085 ай бұрын
Does this come with RTR option? Coz im really bad on assembling things..i just want to go out and have fun with it..
@reyjr36085 ай бұрын
Is it on sell as RTR?..if it does, please share link or website to order one..😄👍
@RhinoRC5 ай бұрын
If you like we can support the RTR!
@reyjr36085 ай бұрын
@@RhinoRC RTR estimated price?
@aja_rc5 ай бұрын
esc rhino, is it good? When going down or up esc, it can stop the car to be silent, does it function like the brakes?
@aja_rc5 ай бұрын
Top rock crewler rc car
@rcarty4195 ай бұрын
Very nice! These look so good!!!
@Clodercs6 ай бұрын
I am building the same with 2.2 and just wonder if the 1.9 is a better choice for lower COG !?
@RhinoRC6 ай бұрын
Yes, but 2.2 Passing Ability is better.
@danwoodruff43236 ай бұрын
Very nice 👍
@shelbytucker51026 ай бұрын
Looks great! What steering servo are you running?
@RhinoRC6 ай бұрын
Rctimer brushless servo 45KG
@tommyrockends6 ай бұрын
Do you have a website?
@RhinoRC6 ай бұрын
www.rhinoesc.com
@Charlieoil6 ай бұрын
Are these 2.2 or 1.9 tires????
@RhinoRC6 ай бұрын
1.9 tires and 2.2 wheel.
@allscalerc6 ай бұрын
Thanks for the awesome build video. I will definitely use it for building mine.
@Clodercs6 ай бұрын
Are you on 2.2..they look on the small side!?
@RhinoRC6 ай бұрын
I used 1.9 inch JC with 2.2 inch wheel.
@Clodercs6 ай бұрын
@@RhinoRC i ordered the 2.2 , just hope it is not gone be too high with the capra axles🤔😩
@RhinoRC6 ай бұрын
@@Clodercs 2.2 is ok also
@pyfpv87686 ай бұрын
Please share me your email address. We need your esc for reselling purposes.
@pyfpv87686 ай бұрын
Can you provide me your email address? We need your esc for reselling.
@Clodercs6 ай бұрын
Hahahahah funny to see the Capra struggling to keep up with those 2!!