Why can’t calibration Throttle Range?
Рет қаралды 2,068
Жыл бұрынWhen you can’t calibration throttle range, please setting the CH2 NOR or RVE!
@valleyboyzrccrawlers8662 8 ай бұрын
Did you find the fix in having the same issue
@TheHammer Жыл бұрын
My am32 esc has been working great on my sanwa m12s. Just changed to an m17 and the only way I could get it to work was change the throttle type from f7:b3 to f5:b5. However, it won't let me calibrate the throttle. I tried rev in the radio and it didn't work. Also tried reverse rotation in the software and it didn't work. Any ideas?
@jebster33 9 ай бұрын
I just got this esc and I can't get the throttle to calibrate with my mt4 radio. Hoping to find some advice.
@danieltomczyk2185 Жыл бұрын
to esc nie lubi sanwy. Na 1.92 udało się po przestawieniu gazu na 50:50. wgrałem 1.95 i znów problem z kalibracją....
@creekcreeperrc7972 Жыл бұрын
Just got mine in, is it pre programmed or do I need to go through and set it up on my computer before use?
@RhinoRC Жыл бұрын
All ESC have been pre-programmed before shipping, if you purchase the combo, we have settings match motor KV, if you purchase ESC, you need settings KV value after got it!
@creekcreeperrc7972 Жыл бұрын
@@RhinoRC Gotcha I only got the ESC so I will be sure to set kv first. Thank you.
@nicholasstephey8475 Жыл бұрын
This process works great
@RCDRIFT12 Жыл бұрын
我是購買包含1850kv馬達的 試過任何方式 都沒辦法校正成功 也按照你的視頻操作。遙控器有差別嗎？ 我的遙控器是Sanwa mt-4
@weedfaya959 Жыл бұрын
Pourquoi l esc chauffe quand il est programmé sur 1860 kv pour un moteur de 1850 kv ?
@RCDRIFT12 Жыл бұрын
我的油門第三中立點頻率對不到 一直沒辦法完成
@RhinoRC Жыл бұрын
Please turn on “Bi-directional (FWD/RV)” in GUI.
@RCDRIFT12 Жыл бұрын
Bi-directional is turned on
@RhinoRC Жыл бұрын
@@RCDRIFT12 Restore default settings, if it can’t work still, please reflash the firmware, thanks!
@RCDRIFT12 Жыл бұрын
Esc suddenly confirms the neutral point and walks by himself. I set the remote throttle to -100.
HolmesHobbies
Рет қаралды 12 М.
Furadi
Рет қаралды 10 М.